| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240711-th1520-clk-v3-6-6ff17bb318fb@tenstorrent.com>
Date: Thu, 11 Jul 2024 09:56:24 -0700
From: Drew Fustini <dfustini@...storrent.com>
To: Jisheng Zhang <jszhang@...nel.org>, Guo Ren <guoren@...nel.org>,
Fu Wei <wefu@...hat.com>, Yangtao Li <frank.li@...o.com>,
Thomas Bonnefille <thomas.bonnefille@...tlin.com>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>
Cc: linux-riscv@...ts.infradead.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Drew Fustini <dfustini@...storrent.com>
Subject: [PATCH v3 6/7] riscv: dts: thead: update TH1520 dma and timer
nodes to use clock controller
Change the dma-controller and timer nodes to use the APB clock provided
by the AP_SUBSYS clock controller.
Remove apb_clk reference from BeagleV Ahead and LPI4a dts.
Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
Signed-off-by: Drew Fustini <dfustini@...storrent.com>
---
arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 4 ----
.../boot/dts/thead/th1520-lichee-module-4a.dtsi | 4 ----
arch/riscv/boot/dts/thead/th1520.dtsi | 24 ++++++++--------------
3 files changed, 9 insertions(+), 23 deletions(-)
diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index 55f1ed0cb433..1180e41c7b07 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -44,10 +44,6 @@ &osc_32k {
clock-frequency = <32768>;
};
-&apb_clk {
- clock-frequency = <62500000>;
-};
-
&dmac0 {
status = "okay";
};
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index 762eceb415f8..78977bdbbe3d 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -25,10 +25,6 @@ &osc_32k {
clock-frequency = <32768>;
};
-&apb_clk {
- clock-frequency = <62500000>;
-};
-
&dmac0 {
status = "okay";
};
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index ce3a0847aa9c..d05002ad7c96 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -135,12 +135,6 @@ osc_32k: 32k-oscillator {
#clock-cells = <0>;
};
- apb_clk: apb-clk-clock {
- compatible = "fixed-clock";
- clock-output-names = "apb_clk";
- #clock-cells = <0>;
- };
-
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
@@ -325,7 +319,7 @@ dmac0: dma-controller@...fc00000 {
compatible = "snps,axi-dma-1.01a";
reg = <0xff 0xefc00000 0x0 0x1000>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb_clk>, <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>, <&clk CLK_PERI_APB_PCLK>;
clock-names = "core-clk", "cfgr-clk";
#dma-cells = <1>;
dma-channels = <4>;
@@ -340,7 +334,7 @@ dmac0: dma-controller@...fc00000 {
timer0: timer@...fc32000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32000 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -349,7 +343,7 @@ timer0: timer@...fc32000 {
timer1: timer@...fc32014 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32014 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -358,7 +352,7 @@ timer1: timer@...fc32014 {
timer2: timer@...fc32028 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32028 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -367,7 +361,7 @@ timer2: timer@...fc32028 {
timer3: timer@...fc3203c {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc3203c 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -398,7 +392,7 @@ uart5: serial@...7f0c000 {
timer4: timer@...fc33000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33000 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -407,7 +401,7 @@ timer4: timer@...fc33000 {
timer5: timer@...fc33014 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33014 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -416,7 +410,7 @@ timer5: timer@...fc33014 {
timer6: timer@...fc33028 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc33028 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -425,7 +419,7 @@ timer6: timer@...fc33028 {
timer7: timer@...fc3303c {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xffc3303c 0x0 0x14>;
- clocks = <&apb_clk>;
+ clocks = <&clk CLK_PERI_APB_PCLK>;
clock-names = "timer";
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
--
2.34.1
Powered by blists - more mailing lists