[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240712150709.3134474-1-kamilh@axis.com>
Date: Fri, 12 Jul 2024 17:07:05 +0200
From: Kamil Horák (2N) <kamilh@...s.com>
To: <florian.fainelli@...adcom.com>, <bcm-kernel-feedback-list@...adcom.com>,
<andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <f.fainelli@...il.com>, <kory.maincent@...tlin.com>
CC: <kamilh@...s.com>, <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v12 0/4] net: phy: bcm5481x: add support for BroadR-Reach mode
PATCH 1 - Add the 10baseT1BRR_Full link mode
PATCH 2 - Add the definitions of LRE registers, necessary to use
BroadR-Reach modes on the BCM5481x PHY
PATCH 3 - Add brr-mode flag to switch between IEEE802.3 and BroadR-Reach
PATCH 4 - Implementation of the BroadR-Reach modes for the Broadcom
PHYs
Changes in v2:
- Divided into multiple patches, removed useless link modes
Changes in v3:
- Fixed uninitialized variable in bcm5481x_config_delay_swap function
Changes in v4:
- Improved the division of functions between bcm-phy library and broadcom.c
- Changed the BroadR-Reach / IEEE mode switching to device tree boolean as
these modes are mutually exclusive and barely could coexist in one hardware
- Made the link mode selection compatible with current ethtool (i.e. the
linkmode is selected by choosing speed and master-slave)
Changes in v5:
- Fixed the operator precedence as reported by the kernel test robot
- Fixed doc of bcm_linkmode_adv_to_mii_adv_t function
Changes in v6:
- Moved the brr-mode flag to separate commit as required by the rules for
DT binding patches
- Renamed some functions to make clear they handle LRE-related stuff
- Reordered variable definitions to match the coding style requirements
Changes in v7:
- Fixed the changes distribution into patches (first one was not buildable)
Changes in v8:
- Fixed coding style and did other changes on behalf of the reviewers
Changes in v9:
- Applied reviewed tags to unchanged commits, reformatted the submitter's address
Changes in v10:
- Fixed minor CR issues, clarified the embedded documentation and the commit message
Changes in v11:
- Reworded the brr-mode flag documentation
Changes in v12:
- Reworked the BroadR-Reach mode selection as suggested by the review
- Renamed some functions to make clear that they handle the alternative (LRE) register set
- Some minor changes as recommended
Kamil Horák (2N) (4):
net: phy: bcm54811: New link mode for BroadR-Reach
net: phy: bcm54811: Add LRE registers definitions
dt-bindings: ethernet-phy: add optional brr-mode flag
net: phy: bcm-phy-lib: Implement BroadR-Reach link modes
.../devicetree/bindings/net/ethernet-phy.yaml | 8 +
drivers/net/phy/bcm-phy-lib.c | 115 +++++
drivers/net/phy/bcm-phy-lib.h | 4 +
drivers/net/phy/broadcom.c | 403 ++++++++++++++++--
drivers/net/phy/phy-core.c | 3 +-
include/linux/brcmphy.h | 88 ++++
include/uapi/linux/ethtool.h | 1 +
net/ethtool/common.c | 3 +
8 files changed, 596 insertions(+), 29 deletions(-)
--
2.39.2
Powered by blists - more mailing lists