| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240712-msm89xx-wingtech-init-v1-3-64f4aa1870bd@trvn.ru>
Date: Fri, 12 Jul 2024 21:04:08 +0500
From: Nikita Travkin <nikita@...n.ru>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
Nikita Travkin <nikita@...n.ru>,
Adam Słaboń <asaillen@...tonmail.com>
Subject: [PATCH 3/3] arm64: dts: qcom: msm8939-wingtech-wt82918: Add Lenovo
Vibe K5 devices
From: Adam Słaboń <asaillen@...tonmail.com>
This commit introduces multiple hardware variants of Lenovo Vibe K5.
- A6020a40 (msm8929-wingtech-wt82918hd)
- A6020a46/A6020l36 (msm8939-wingtech-wt82918)
- A6020a40 S616 H39 (msm8939-wingtech-wt82918hd)
These devices are added with support for many features, notably:
- Basic features like USB, mmc/sd storage, wifi, buttons, leds;
- Accelerometer;
- Touchscreen;
- Sound and modem.
Note that "HD" variant of K5 is based on msm8929 which is a lower bin
of msm8939 SoC. A simple dtsi is added for this soc along with the new
devices.
Unfortunately, despite the heavy similarities, the combination of minor
differences between variants make them incompatible between each other.
Signed-off-by: Adam Słaboń <asaillen@...tonmail.com>
[Nikita: Minor cleanup, commit message]
Signed-off-by: Nikita Travkin <nikita@...n.ru>
---
arch/arm64/boot/dts/qcom/Makefile | 3 +
.../boot/dts/qcom/msm8929-wingtech-wt82918hd.dts | 17 ++
arch/arm64/boot/dts/qcom/msm8929.dtsi | 5 +
.../boot/dts/qcom/msm8939-wingtech-wt82918.dts | 16 ++
.../boot/dts/qcom/msm8939-wingtech-wt82918.dtsi | 254 +++++++++++++++++++++
.../boot/dts/qcom/msm8939-wingtech-wt82918hd.dts | 16 ++
6 files changed, 311 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index fd4c7c41ddc4..48ec781fa1d8 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -58,10 +58,13 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86518.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86528.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918hd.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8929-wingtech-wt82918hd.dts b/arch/arm64/boot/dts/qcom/msm8929-wingtech-wt82918hd.dts
new file mode 100644
index 000000000000..f9a358e852f8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8929-wingtech-wt82918hd.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-wingtech-wt82918.dtsi"
+#include "msm8929.dtsi"
+
+/ {
+ model = "Lenovo Vibe K5 (HD) (Wingtech WT82918)";
+ compatible = "wingtech,wt82918hd", "qcom,msm8929";
+ chassis-type = "handset";
+};
+
+&touchscreen {
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8929.dtsi b/arch/arm64/boot/dts/qcom/msm8929.dtsi
new file mode 100644
index 000000000000..c3d1d1ace2f6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8929.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+&opp_table {
+ /delete-node/ opp-550000000;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dts b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dts
new file mode 100644
index 000000000000..ebc624db880e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-wingtech-wt82918.dtsi"
+
+/ {
+ model = "Lenovo Vibe K5 (Wingtech WT82918)";
+ compatible = "wingtech,wt82918", "qcom,msm8939";
+ chassis-type = "handset";
+};
+
+&touchscreen {
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi
new file mode 100644
index 000000000000..ff45ba8e02b1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/ {
+ aliases {
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pm8916_pwm 0 100000>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <128>;
+ };
+
+ flash-led-controller {
+ compatible = "sgmicro,sgm3140";
+ enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&camera_front_flash_default>;
+ pinctrl-names = "default";
+
+ flash_led: led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ button-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&gpio_leds_default>;
+ pinctrl-names = "default";
+
+ led-0 {
+ gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_CHARGING;
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ retain-state-suspended;
+ };
+
+ led-1 {
+ gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ retain-state-suspended;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb_id_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ accelerometer@68 {
+ compatible = "invensense,icm20608";
+ reg = <0x68>;
+
+ pinctrl-0 = <&accelerometer_default>;
+ pinctrl-names = "default";
+
+ interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen: touchscreen@38 {
+ /* actually FT5336 */
+ compatible = "edt,edt-ft5306";
+ reg = <0x38>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc-supply = <&pm8916_l17>;
+ iovcc-supply = <&pm8916_l6>;
+
+ reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&blsp_uart2 {
+ status = "okay";
+};
+
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_pwm {
+ pinctrl-0 = <&pwm_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pm8916_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8916_rpm_regulators {
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default>;
+ pinctrl-1 = <&sdc2_sleep>;
+ pinctrl-names = "default", "sleep";
+ non-removable;
+ status = "okay";
+};
+
+&usb {
+ extcon = <&usb_id>, <&usb_id>;
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&wcnss {
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&tlmm {
+ accelerometer_default: accelerometer-default-state {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ camera_front_flash_default: camera-front-flash-default-state {
+ pins = "gpio31", "gpio32";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio107";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gpio_leds_default: gpio-leds-default-state {
+ pins = "gpio36", "gpio69";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen_default: touchscreen-default-state {
+ reset-pins {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen-pins {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ usb_id_default: usb-id-default-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
+
+&pm8916_mpps {
+ pwm_out: mpp4-state {
+ pins = "mpp4";
+ function = "digital";
+ power-source = <PM8916_MPP_VPH>;
+ output-low;
+ qcom,dtest = <1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918hd.dts b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918hd.dts
new file mode 100644
index 000000000000..87016b5c44fd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918hd.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-wingtech-wt82918.dtsi"
+
+/ {
+ model = "Lenovo Vibe K5 (HD) (Wingtech WT82918)";
+ compatible = "wingtech,wt82918hdhw39", "qcom,msm8939";
+ chassis-type = "handset";
+};
+
+&touchscreen {
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+};
--
2.45.2
Powered by blists - more mailing lists