| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+3zgmvct7BWib9A7O1ykUf=0nZpdbdpXBdPWOCqfPuyCT3fug@mail.gmail.com>
Date: Sat, 13 Jul 2024 13:52:52 -0400
From: Tim Lewis <elatllat@...il.com>
To: Greg KH <gregkh@...uxfoundation.org>
Cc: Niklas Neronin <niklas.neronin@...ux.intel.com>,
Mathias Nyman <mathias.nyman@...ux.intel.com>, linux-usb@...r.kernel.org,
open list <linux-kernel@...r.kernel.org>, stable@...r.kernel.org
Subject: Re: [PATCH 6.1 000/102] 6.1.98-rc1 review
The patch
usb: xhci: prevent potential failure in handle_tx_event() for
Transfer events without TRB
https://patches.linaro.org/project/linux-usb/patch/20240429140245.3955523-11-mathias.nyman@linux.intel.com/
causes The Linux kernel
6.1.98
https://lkml.org/lkml/2024/7/9/645
to crash when plugging in a USB Seagate drive.
https://www.seagate.com/ca/en/products/gaming-drives/pc-gaming/firecuda-gaming-hub/
This is a regression.
Behavior of 6.1.98:
==============================================================================
scsi host1: uas_eh_device_reset_handler start
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: 0-...!: (1 GPs behind) idle=686c/0/0x1 softirq=1841/1841 fqs=610
(detected by 4, t=5253 jiffies, g=2269, q=225 ncpus=6)
Task dump for CPU 0:
task:swapper/0 state:R running task stack:0 pid:0
ppid:0 flags:0x0000000
8
Call trace:
__switch_to+0xe4/0x160
0xd7f8f808
rcu: rcu_preempt kthread timer wakeup didn't happen for 4037 jiffies!
g2269 f0x0 RCU_GP_WAIT_FQS
(5) ->state=0x402
rcu: Possible timer handling issue on cpu=5 timer-softirq=1141
rcu: rcu_preempt kthread starved for 4043 jiffies! g2269 f0x0
RCU_GP_WAIT_FQS(5) ->state=0x402 -
>cpu=5
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is
now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack:0 pid:14 ppid:2 flags:0x00000008
Call trace:
__switch_to+0xe4/0x160
__schedule+0x28c/0x710
schedule+0x5c/0xd0
schedule_timeout+0x8c/0x100
rcu_gp_fqs_loop+0x140/0x4a0
rcu_gp_kthread+0x13c/0x170
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
rcu: Stack dump where RCU GP kthread last ran:
Task dump for CPU 5:
task:kworker/5:1 state:R running task stack:0 pid:89
ppid:2 flags:0x0000000
8
Workqueue: events xhci_handle_command_timeout
Call trace:
__switch_to+0xe4/0x160
0x0
Behavior of 6.1.97 (or 6.1.978 with the patch reverted):
==============================================================================
scsi host1: uas_eh_device_reset_handler start
usb 2-1.4.2.1: reset SuperSpeed USB device number 6 using xhci-hcd
scsi host1: uas_eh_device_reset_handler success
sd 1:0:0:0:31251759103 512-byte logical blocks: (16.0 TB/14.6 TiB)
sd 1:0:0:0:Write Protect is off
sd 1:0:0:0:Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0:Preferred minimum I/O size 512 bytes
sd 1:0:0:0:Optimal transfer size 33553920 bytes
sdb: sdb1
sd 1:0:0:0:Attached SCSI disk
sd 0:0:0:0:tag#6 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
sd 0:0:0:0:tag#6 CDB: opcode=0x9e, sa=0x10 9e 10 00 00 00 00 00 00 00
00 00 00 00 20 00 0
0
scsi host0: uas_eh_device_reset_handler start
usb 2-1.4.1: reset SuperSpeed USB device number 5 using xhci-hcd
scsi host0: uas_eh_device_reset_handler success
sd 0:0:0:0:31251759103 512-byte logical blocks: (16.0 TB/14.6 TiB)
sd 0:0:0:0:Write Protect is off
sd 0:0:0:0:Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0:Preferred minimum I/O size 512 bytes
sd 0:0:0:0:Optimal transfer size 33553920 bytes
sda: sda1
sd 0:0:0:0:Attached SCSI disk
Powered by blists - more mailing lists