lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240713223357.2911169-1-olek2@wp.pl>
Date: Sun, 14 Jul 2024 00:33:57 +0200
From: Aleksander Jan Bajkowski <olek2@...pl>
To: davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	olek2@...pl,
	shannon.nelson@....com,
	sd@...asysnail.net,
	u.kleine-koenig@...gutronix.de,
	john@...ozen.org,
	ralf@...ux-mips.org,
	ralph.hempel@...tiq.com,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH net] net: ethernet: lantiq_etop: fix memory disclosure

When applying padding, the buffer is not zeroed, which results in
memory disclosure. This patch uses skb_put_padto() to pad Ethernet
frames properly.

It appears that only the MAC in xrx100 and newer SoCs supports
padding by hardware, so software padding must be applied.

Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@...pl>
---
 drivers/net/ethernet/lantiq_etop.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 0b9982804370..196715d9ea43 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -478,11 +478,11 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
 	struct ltq_etop_priv *priv = netdev_priv(dev);
 	struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
 	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-	int len;
 	unsigned long flags;
 	u32 byte_offset;
 
-	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+	if (skb_put_padto(skb, ETH_ZLEN))
+		return NETDEV_TX_OK;
 
 	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
 		netdev_err(dev, "tx ring full\n");
@@ -497,12 +497,13 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
 	netif_trans_update(dev);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	desc->addr = ((unsigned int)dma_map_single(&priv->pdev->dev, skb->data, len,
-						DMA_TO_DEVICE)) - byte_offset;
+	desc->addr = ((unsigned int)dma_map_single(&priv->pdev->dev, skb->data,
+						   skb->len, DMA_TO_DEVICE)) -
+						   byte_offset;
 	/* Make sure the address is written before we give it to HW */
 	wmb();
 	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
-		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+		LTQ_DMA_TX_OFFSET(byte_offset) | (skb->len & LTQ_DMA_SIZE_MASK);
 	ch->dma.desc++;
 	ch->dma.desc %= LTQ_DESC_NUM;
 	spin_unlock_irqrestore(&priv->lock, flags);
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ