| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ae365aad-efd0-43ac-bf46-dbd8f67f7dcb@microchip.com>
Date: Mon, 15 Jul 2024 10:47:51 +0000
From: <Varshini.Rajendran@...rochip.com>
To: <claudiu.beznea@...on.dev>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <Nicolas.Ferre@...rochip.com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5 25/27] ARM: dts: at91: sam9x7: add device tree for SoC
Hi Claudiu,
On 14/07/24 7:14 pm, claudiu beznea wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Hi, Varshini,
>
> On 03.07.2024 13:29, Varshini Rajendran wrote:
>> Add device tree file for SAM9X7 SoC family.
>>
>> Co-developed-by: Nicolas Ferre <nicolas.ferre@...rochip.com>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@...rochip.com>
>> Signed-off-by: Varshini Rajendran <varshini.rajendran@...rochip.com>
>> ---
>> Changed in v5:
>> - Sorted node properties according dts coding style.
>> - Removed space before pwn status.
>> - Fixed DT schema warnings related to usart.
>> - Aligned <> braces.
>> - Changed spaces to tabs.
>> - Changed node names to generic names.
>> - Corrected the typo in gpbr compatible.
>> ---
>> arch/arm/boot/dts/microchip/sam9x7.dtsi | 1226 +++++++++++++++++++++++
>> 1 file changed, 1226 insertions(+)
>> create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi
>>
>> diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
>> new file mode 100644
>> index 000000000000..0e3fb94f40b6
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
>> @@ -0,0 +1,1226 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
>> + *
>> + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
>> + *
>> + * Author: Varshini Rajendran <varshini.rajendran@...rochip.com>
>> + */
>> +
>> +#include <dt-bindings/clock/at91.h>
>> +#include <dt-bindings/dma/at91.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/mfd/at91-usart.h>
>> +#include <dt-bindings/mfd/atmel-flexcom.h>
>> +#include <dt-bindings/pinctrl/at91.h>
>> +
>> +/ {
>> + model = "Microchip SAM9X7 SoC";
>> + compatible = "microchip,sam9x7";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + interrupt-parent = <&aic>;
>> +
>> + aliases {
>> + serial0 = &dbgu;
>> + gpio0 = &pioA;
>> + gpio1 = &pioB;
>> + gpio2 = &pioC;
>> + gpio3 = &pioD;
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu@0 {
>> + compatible = "arm,arm926ej-s";
>> + reg = <0>;
>> + device_type = "cpu";
>> + };
>> + };
>> +
>> + clocks {
>> + slow_xtal: clock-slowxtal {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> +
>> + main_xtal: clock-mainxtal {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + };
>> + };
>> +
>> + sram: sram@...000 {
>> + compatible = "mmio-sram";
>> + reg = <0x300000 0x10000>;
>> + ranges = <0 0x300000 0x10000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + };
>> +
>> + ahb {
>> + compatible = "simple-bus";
>> + ranges;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + sdmmc0: mmc@...00000 {
>> + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
>> + reg = <0x80000000 0x300>;
>> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
>> + clock-names = "hclock", "multclk";
>> + assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
>> + assigned-clock-rates = <100000000>;
>> + status = "disabled";
>> + };
>> +
>> + sdmmc1: mmc@...00000 {
>> + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
>> + reg = <0x90000000 0x300>;
>> + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
>> + clock-names = "hclock", "multclk";
>> + assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
>> + assigned-clock-rates = <100000000>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + apb {
>> + compatible = "simple-bus";
>> + ranges;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + flx4: flexcom@...00000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf0000000 0x200>;
>> + ranges = <0x0 0xf0000000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>> + status = "disabled";
>> +
>> + uart4: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>
> According to dts coding style that vendor specific properties goes at the
> end. I'll adjust it when applying, no need to resend for this. Valid for
> all the uart flexcom nodes.
Thanks Claudiu.
>
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(8))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(9))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + spi4: spi@400 {
>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> + reg = <0x400 0x200>;
>> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>> + clock-names = "spi_clk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(8))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(9))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c4: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(8))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(9))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + flx5: flexcom@...04000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf0004000 0x200>;
>> + ranges = <0x0 0xf0004000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>> + status = "disabled";
>> +
>> + uart5: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(10))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(11))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + spi5: spi@400 {
>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> + reg = <0x400 0x200>;
>> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>> + clock-names = "spi_clk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(10))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(11))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c5: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(10))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(11))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + dma0: dma-controller@...08000 {
>> + compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma";
>> + reg = <0xf0008000 0x1000>;
>> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
>> + #dma-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
>> + clock-names = "dma_clk";
>> + status = "disabled";
>> + };
>> +
>> + ssc: ssc@...10000 {
>> + compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc";
>> + reg = <0xf0010000 0x4000>;
>> + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
>> + clock-names = "pclk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(38))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(39))>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2s: i2s@...1c000 {
>> + compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
>> + reg = <0xf001c000 0x100>;
>> + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
>> + clock-names = "pclk", "gclk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(36))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(37))>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + flx11: flexcom@...20000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf0020000 0x200>;
>> + ranges = <0x0 0xf0020000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
>> + status = "disabled";
>> +
>> + uart11: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(22))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(23))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c11: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(22))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(23))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + flx12: flexcom@...24000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf0024000 0x200>;
>> + ranges = <0x0 0xf0024000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
>> + status = "disabled";
>> +
>> + uart12: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(24))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(25))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c12: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(24))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(25))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + pit64b0: timer@...28000 {
>> + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
>> + reg = <0xf0028000 0x100>;
>> + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
>> + clock-names = "pclk", "gclk";
>> + };
>> +
>> + sha: crypto@...2c000 {
>> + compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha";
>> + reg = <0xf002c000 0x100>;
>> + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
>> + clock-names = "sha_clk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(34))>;
>> + dma-names = "tx";
>> + };
>> +
>> + trng: rng@...30000 {
>> + compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng";
>> + reg = <0xf0030000 0x100>;
>> + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
>> + status = "disabled";
>> + };
>> +
>> + aes: crypto@...34000 {
>> + compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes";
>> + reg = <0xf0034000 0x100>;
>> + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
>> + clock-names = "aes_clk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(32))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(33))>;
>> + dma-names = "tx", "rx";
>> + };
>> +
>> + tdes: crypto@...38000 {
>> + compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes";
>> + reg = <0xf0038000 0x100>;
>> + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
>> + clock-names = "tdes_clk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(31))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(30))>;
>> + dma-names = "tx", "rx";
>> + };
>> +
>> + classd: sound@...3c000 {
>> + compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd";
>> + reg = <0xf003c000 0x100>;
>> + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
>> + clock-names = "pclk", "gclk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(35))>;
>> + dma-names = "tx";
>> + status = "disabled";
>> + };
>> +
>> + pit64b1: timer@...40000 {
>> + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
>> + reg = <0xf0040000 0x100>;
>> + interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
>> + clock-names = "pclk", "gclk";
>> + };
>> +
>> + can0: can@...00000 {
>> + compatible = "bosch,m_can";
>> + reg = <0xf8000000 0x100>, <0x300000 0x7800>;
>> + reg-names = "m_can", "message_ram";
>> + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>,
>> + <68 IRQ_TYPE_LEVEL_HIGH 0>;
>> + interrupt-names = "int0", "int1";
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>;
>> + clock-names = "hclk", "cclk";
>> + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>;
>> + assigned-clock-rates = <480000000>, <40000000>;
>> + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
>> + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
>> + status = "disabled";
>> + };
>> +
>> + can1: can@...04000 {
>> + compatible = "bosch,m_can";
>> + reg = <0xf8004000 0x100>, <0x300000 0xbc00>;
>> + reg-names = "m_can", "message_ram";
>> + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>,
>> + <69 IRQ_TYPE_LEVEL_HIGH 0>;
>> + interrupt-names = "int0", "int1";
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>;
>> + clock-names = "hclk", "cclk";
>> + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>;
>> + assigned-clock-rates = <480000000>, <40000000>;
>> + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
>> + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
>> + status = "disabled";
>> + };
>> +
>> + tcb: timer@...08000 {
>> + compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon";
>> + reg = <0xf8008000 0x100>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>;
>> + clock-names = "t0_clk", "gclk", "slow_clk";
>> + status = "disabled";
>> + };
>> +
>> + flx6: flexcom@...10000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf8010000 0x200>;
>> + ranges = <0x0 0xf8010000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
>> + status = "disabled";
>> +
>> + uart6: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(12))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(13))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c6: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(12))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(13))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + flx7: flexcom@...14000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf8014000 0x200>;
>> + ranges = <0x0 0xf8014000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
>> + status = "disabled";
>> +
>> + uart7: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(14))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(15))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c7: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(14))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(15))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + flx8: flexcom@...18000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf8018000 0x200>;
>> + ranges = <0x0 0xf8018000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
>> + status = "disabled";
>> +
>> + uart8: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(16))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(17))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c8: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(16))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(17))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + flx0: flexcom@...1c000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf801c000 0x200>;
>> + ranges = <0x0 0xf801c000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>> + status = "disabled";
>> +
>> + uart0: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(0))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(1))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + spi0: spi@400 {
>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> + reg = <0x400 0x200>;
>> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>> + clock-names = "spi_clk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(0))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(1))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c0: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(0))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(1))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + flx1: flexcom@...20000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf8020000 0x200>;
>> + ranges = <0x0 0xf8020000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>> + status = "disabled";
>> +
>> + uart1: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(2))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(3))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + spi1: spi@400 {
>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> + reg = <0x400 0x200>;
>> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>> + clock-names = "spi_clk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(2))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(3))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(2))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(3))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + flx2: flexcom@...24000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf8024000 0x200>;
>> + ranges = <0x0 0xf8024000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>> + status = "disabled";
>> +
>> + uart2: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(4))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(5))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + spi2: spi@400 {
>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> + reg = <0x400 0x200>;
>> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>> + clock-names = "spi_clk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(4))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(5))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(4))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(5))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + flx3: flexcom@...28000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf8028000 0x200>;
>> + ranges = <0x0 0xf8028000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>> + status = "disabled";
>> +
>> + uart3: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(6))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(7))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + spi3: spi@400 {
>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> + reg = <0x400 0x200>;
>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>> + clock-names = "spi_clk";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(6))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(7))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c3: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(6))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(7))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + gmac: ethernet@...2c000 {
>> + compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem";
>> + reg = <0xf802c000 0x1000>;
>> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 0 */
>> + <60 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 1 */
>> + <61 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 2 */
>> + <62 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 3 */
>> + <63 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 4 */
>> + <64 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 5 */
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>;
>> + clock-names = "hclk", "pclk", "tx_clk", "tsu_clk";
>> + assigned-clocks = <&pmc PMC_TYPE_GCK 67>;
>
> Is this needed?
Sorry I missed to add this line under it. This is needed for the PTP
functionality.
assigned-clock-rates = <266666666>;
I can send another version if you want me to.
>
>> + status = "disabled";
>> + };
>> +
>> + pwm0: pwm@...34000 {
>> + compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm";
>> + reg = <0xf8034000 0x300>;
>> + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
>> + #pwm-cells = <3>;
>> + status = "disabled";
>> + };
>> +
>> + flx9: flexcom@...40000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf8040000 0x200>;
>> + ranges = <0x0 0xf8040000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
>> + status = "disabled";
>> +
>> + uart9: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(18))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(19))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c9: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(18))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(19))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + flx10: flexcom@...44000 {
>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> + reg = <0xf8044000 0x200>;
>> + ranges = <0x0 0xf8044000 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
>> + status = "disabled";
>> +
>> + uart10: serial@200 {
>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0x200 0x200>;
>> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
>> + clock-names = "usart";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(20))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(21))>;
>> + dma-names = "tx", "rx";
>> + atmel,use-dma-rx;
>> + atmel,use-dma-tx;
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> +
>> + i2c10: i2c@600 {
>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> + reg = <0x600 0x200>;
>> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(20))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) |
>> + AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(21))>;
>> + dma-names = "tx", "rx";
>> + atmel,fifo-size = <16>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + sfr: sfr@...50000 {
>> + compatible = "microchip,sam9x7-sfr", "microchip,sam9x60-sfr", "syscon";
>> + reg = <0xf8050000 0x100>;
>> + };
>> +
>> + matrix: matrix@...fde00 {
>> + compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
>> + reg = <0xffffde00 0x200>;
>> + };
>> +
>> + pmecc: ecc-engine@...fe000 {
>> + compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc";
>> + reg = <0xffffe000 0x300>, <0xffffe600 0x100>;
>> + };
>> +
>> + mpddrc: mpddrc@...fe800 {
>> + compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc";
>> + reg = <0xffffe800 0x200>;
>> + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
>> + clock-names = "ddrck", "mpddr";
>> + };
>> +
>> + smc: smc@...fea00 {
>> + compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon";
>> + reg = <0xffffea00 0x100>;
>> + };
>> +
>> + aic: interrupt-controller@...ff100 {
>> + compatible = "microchip,sam9x7-aic", "microchip,sam9x60-aic";
>> + reg = <0xfffff100 0x100>;
>> + #interrupt-cells = <3>;
>> + interrupt-controller;
>> + atmel,external-irqs = <31>;
>> + microchip,nr-irqs = <70>;
>
> Ah, this needs to be clarified before applying.
Can you discard the property and apply the rest (if this version can be
applied)? I can resolve the irq number related issue in a separate
series. Maybe fix the compatibles if required.
>
>> + };
>> +
>> + dbgu: serial@...ff200 {
>> + compatible = "microchip,sam9x7-dbgu", "atmel,at91sam9260-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> + reg = <0xfffff200 0x200>;
>> + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
>> + clock-names = "usart";
>> + dmas = <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(28))>,
>> + <&dma0
>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> + AT91_XDMAC_DT_PERID(29))>;
>> + dma-names = "tx", "rx";
>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> + status = "disabled";
>> + };
>> +
>> + pinctrl: pinctrl@...ff400 {
>> + compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd";
>> + ranges = <0xfffff400 0xfffff400 0x800>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + /* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */
>> + atmel,mux-mask = <
>> + /* A B C D */
>> + 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000 /* pioA */
>> + 0x07ffffff 0x0805fe7f 0x01ff9f81 0x06078000 /* pioB */
>> + 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000 /* pioC */
>> + 0x00003fff 0x00003fe0 0x0000003f 0x00000000 /* pioD */
>> + >;
>> +
>> + pioA: gpio@...ff400 {
>> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
>> + reg = <0xfffff400 0x200>;
>> + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
>> + #interrupt-cells = <2>;
>> + interrupt-controller;
>> + #gpio-cells = <2>;
>> + gpio-controller;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
>> + };
>> +
>> + pioB: gpio@...ff600 {
>> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
>> + reg = <0xfffff600 0x200>;
>> + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
>> + #interrupt-cells = <2>;
>> + interrupt-controller;
>> + #gpio-cells = <2>;
>> + gpio-controller;
>> + #gpio-lines = <26>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
>> + };
>> +
>> + pioC: gpio@...ff800 {
>> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
>> + reg = <0xfffff800 0x200>;
>> + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
>> + #interrupt-cells = <2>;
>> + interrupt-controller;
>> + #gpio-cells = <2>;
>> + gpio-controller;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
>> + };
>> +
>> + pioD: gpio@...ffa00 {
>> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
>> + reg = <0xfffffa00 0x200>;
>> + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
>> + #interrupt-cells = <2>;
>> + interrupt-controller;
>> + #gpio-cells = <2>;
>> + gpio-controller;
>> + #gpio-lines = <22>;
>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
>> + };
>> + };
>> +
>> + pmc: clock-controller@...ffc00 {
>> + compatible = "microchip,sam9x7-pmc", "syscon";
>> + reg = <0xfffffc00 0x200>;
>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> + #clock-cells = <2>;
>> + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
>> + clock-names = "td_slck", "md_slck", "main_xtal";
>> + };
>> +
>> + reset_controller: reset-controller@...ffe00 {
>> + compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc";
>> + reg = <0xfffffe00 0x10>;
>> + clocks = <&clk32k 0>;
>> + };
>> +
>> + poweroff: poweroff@...ffe10 {
>> + compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc";
>> + reg = <0xfffffe10 0x10>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + clocks = <&clk32k 0>;
>> + atmel,wakeup-rtc-timer;
>> + atmel,wakeup-rtt-timer;
>> + status = "disabled";
>> + };
>> +
>> + rtt: rtc@...ffe20 {
>> + compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt";
>> + reg = <0xfffffe20 0x20>;
>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&clk32k 0>;
>> + };
>> +
>> + clk32k: clock-controller@...ffe50 {
>> + compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc";
>> + reg = <0xfffffe50 0x4>;
>> + clocks = <&slow_xtal>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + gpbr: syscon@...ffe60 {
>> + compatible = "microchip,sam9x7-gpbr", "atmel,at91sam9260-gpbr", "syscon";
>> + reg = <0xfffffe60 0x10>;
>> + };
>> +
>> + rtc: rtc@...ffea8 {
>> + compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc";
>> + reg = <0xfffffea8 0x100>;
>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> + clocks = <&clk32k 0>;
>> + };
>> +
>> + watchdog: watchdog@...fff80 {
>> + compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt";
>> + reg = <0xffffff80 0x24>;
>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> + status = "disabled";
>> + };
>> + };
>> +};
--
Thanks and Regards,
Varshini Rajendran.
Powered by blists - more mailing lists