| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d738a0e2-5a17-4323-9c86-b5a806066292@oracle.com>
Date: Mon, 15 Jul 2024 10:28:06 -0400
From: Steven Sistare <steven.sistare@...cle.com>
To: Jason Wang <jasowang@...hat.com>
Cc: virtualization@...ts.linux-foundation.org, linux-kernel@...r.kernel.org,
"Michael S. Tsirkin" <mst@...hat.com>,
Si-Wei Liu <si-wei.liu@...cle.com>,
Eugenio Perez Martin <eperezma@...hat.com>,
Xuan Zhuo <xuanzhuo@...ux.alibaba.com>,
Dragos Tatulea <dtatulea@...dia.com>
Subject: Re: [PATCH V2 5/7] vhost-vdpa: VHOST_IOTLB_REMAP
On 7/14/2024 10:34 PM, Jason Wang wrote:
> On Fri, Jul 12, 2024 at 9:19 PM Steve Sistare <steven.sistare@...cle.com> wrote:
>>
>> When device ownership is passed to a new process via VHOST_NEW_OWNER,
>> some devices need to know the new userland addresses of the dma mappings.
>> Define the new iotlb message type VHOST_IOTLB_REMAP to update the uaddr
>> of a mapping. The new uaddr must address the same memory object as
>> originally mapped.
>>
>> The user must suspend the device before the old address is invalidated,
>> and cannot resume it until after VHOST_IOTLB_REMAP is called, but this
>> requirement is not enforced by the API.
>>
>> Signed-off-by: Steve Sistare <steven.sistare@...cle.com>
>> ---
>> drivers/vhost/vdpa.c | 58 ++++++++++++++++++++++++++++++++
>> include/uapi/linux/vhost_types.h | 11 +++++-
>> 2 files changed, 68 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c
>> index 4396fe1a90c4..51f71c45c4a9 100644
>> --- a/drivers/vhost/vdpa.c
>> +++ b/drivers/vhost/vdpa.c
>> @@ -1257,6 +1257,61 @@ static int vhost_vdpa_pa_map(struct vhost_vdpa *v,
>>
>> }
>>
>> +static int vhost_vdpa_process_iotlb_remap(struct vhost_vdpa *v,
>> + struct vhost_iotlb *iotlb,
>> + struct vhost_iotlb_msg *msg)
>> +{
>> + struct vdpa_device *vdpa = v->vdpa;
>> + const struct vdpa_config_ops *ops = vdpa->config;
>> + u32 asid = iotlb_to_asid(iotlb);
>> + u64 start = msg->iova;
>> + u64 last = start + msg->size - 1;
>> + struct vhost_iotlb_map *map;
>> + int r = 0;
>> +
>> + if (msg->perm || !msg->size)
>> + return -EINVAL;
>> +
>> + map = vhost_iotlb_itree_first(iotlb, start, last);
>> + if (!map)
>> + return -ENOENT;
>> +
>> + if (map->start != start || map->last != last)
>> + return -EINVAL;
>
> I had a question here, if a buggy user space that:
>
> 1) forget to update some of the mappings
> 2) address is wrong
> 3) other cases.
>
> Does this mean the device can DMA to the previous owner?
Yes, but only to the mappings which were already pinned for DMA for this
device, and the old owner is giving the new owner permission to DMA to that
memory even without bugs.
> If yes, does
> this have security implications?
No. The previous owner has given the new owner permission to take over. They
trust each other completely. In the live update case, they are the same; the new
owner is the old owner reincarnated.
- Steve
>> +
>> + /*
>> + * The current implementation does not support the platform iommu
>> + * with use_va. And if !use_va, remap is not necessary.
>> + */
>> + if (!ops->set_map && !ops->dma_map)
>> + return -EINVAL;
>> +
>> + /*
>> + * The current implementation supports set_map but not dma_map.
>> + */
>> + if (!ops->set_map)
>> + return -EINVAL;
>> +
>> + /*
>> + * Do not verify that the new size@...dr points to the same physical
>> + * pages as the old size@...dr, because that would take time O(npages),
>> + * and would increase guest down time during live update. If the app
>> + * is buggy and they differ, then the app may corrupt its own memory,
>> + * but no one else's.
>> + */
>> +
>> + /*
>> + * Batch will finish later in BATCH_END by calling set_map for the new
>> + * addresses collected here. Non-batch must do it now.
>> + */
>> + if (!v->in_batch)
>> + r = ops->set_map(vdpa, asid, iotlb);
>> + if (!r)
>> + map->addr = msg->uaddr;
>> +
>> + return r;
>> +}
>> +
>> static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v,
>> struct vhost_iotlb *iotlb,
>> struct vhost_iotlb_msg *msg)
>> @@ -1336,6 +1391,9 @@ static int vhost_vdpa_process_iotlb_msg(struct vhost_dev *dev, u32 asid,
>> ops->set_map(vdpa, asid, iotlb);
>> v->in_batch = false;
>> break;
>> + case VHOST_IOTLB_REMAP:
>> + r = vhost_vdpa_process_iotlb_remap(v, iotlb, msg);
>> + break;
>> default:
>> r = -EINVAL;
>> break;
>> diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h
>> index 9177843951e9..35908315ff55 100644
>> --- a/include/uapi/linux/vhost_types.h
>> +++ b/include/uapi/linux/vhost_types.h
>> @@ -79,7 +79,7 @@ struct vhost_iotlb_msg {
>> /*
>> * VHOST_IOTLB_BATCH_BEGIN and VHOST_IOTLB_BATCH_END allow modifying
>> * multiple mappings in one go: beginning with
>> - * VHOST_IOTLB_BATCH_BEGIN, followed by any number of
>> + * VHOST_IOTLB_BATCH_BEGIN, followed by any number of VHOST_IOTLB_REMAP or
>> * VHOST_IOTLB_UPDATE messages, and ending with VHOST_IOTLB_BATCH_END.
>> * When one of these two values is used as the message type, the rest
>> * of the fields in the message are ignored. There's no guarantee that
>> @@ -87,6 +87,15 @@ struct vhost_iotlb_msg {
>> */
>> #define VHOST_IOTLB_BATCH_BEGIN 5
>> #define VHOST_IOTLB_BATCH_END 6
>> +
>> +/*
>> + * VHOST_IOTLB_REMAP registers a new uaddr for the existing mapping at iova.
>> + * The new uaddr must address the same memory object as originally mapped.
>> + * Failure to do so will result in user memory corruption and/or device
>> + * misbehavior. iova and size must match the arguments used to create the
>> + * an existing mapping. Protection is not changed, and perm must be 0.
>> + */
>> +#define VHOST_IOTLB_REMAP 7
>> __u8 type;
>> };
>
> Thanks
>
>>
>> --
>> 2.39.3
>>
>
Powered by blists - more mailing lists