| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240715053537.290064-1-harini.t@amd.com>
Date: Mon, 15 Jul 2024 11:05:37 +0530
From: Harini T <harini.t@....com>
To: <linux@...ck-us.net>, <michal.simek@....com>, <srinivas.neeli@....com>,
<shubhrajyoti.datta@....com>
CC: <srinivas.goud@....com>, <wim@...ux-watchdog.org>,
<linux-watchdog@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <git@....com>, Harini T <harini.t@....com>
Subject: [PATCH V2] watchdog: xilinx_wwdt: Calculate max_hw_heartbeat_ms using clock frequency
In the current implementation, the value of max_hw_heartbeat_ms is set
to the timeout period expressed in milliseconds and fails to verify if
the close window percentage exceeds the maximum value that the hardware
supports.
1. Calculate max_hw_heartbeat_ms based on input clock frequency.
2. Limit the close and open window percent to hardware supported value
to avoid truncation.
3. If the user input timeout exceeds the maximum timeout supported,
use only open window and the framework supports the higher timeouts.
Fixes: 12984cea1b8c ("watchdog: xilinx_wwdt: Add Versal window watchdog support")
Signed-off-by: Harini T <harini.t@....com>
---
Changes in V2:
- Modify the implementation to make the timeout independent of the
maximum hardware timeout as the framework supports it.
- Modify the implementation to obtain ticks from milliseconds instead of
ticks from seconds to avoid the minor time difference between hardware
and software.
- Limit the close and open window percentage to hardware supported value
to avoid truncation.
- If the timeout exceeds the maximum timeout supported, use only open
window and set the min_hw_heartbeat_ms to zero.
- Modify the commit title and description.
- Add Fixes tag in commit description.
V1 link: https://lore.kernel.org/all/20240319111219.21094-1-harini.t@amd.com/
---
drivers/watchdog/xilinx_wwdt.c | 70 +++++++++++++++++++++++++++++-----
1 file changed, 60 insertions(+), 10 deletions(-)
diff --git a/drivers/watchdog/xilinx_wwdt.c b/drivers/watchdog/xilinx_wwdt.c
index d271e2e8d6e2..94a8a0275cd8 100644
--- a/drivers/watchdog/xilinx_wwdt.c
+++ b/drivers/watchdog/xilinx_wwdt.c
@@ -36,6 +36,12 @@
#define XWWDT_CLOSE_WINDOW_PERCENT 50
+/* Maximum count value of each 32 bit window */
+#define XWWDT_MAX_COUNT_WINDOW GENMASK(31, 0)
+
+/* Maximum count value of closed and open window combined */
+#define XWWDT_MAX_COUNT_WINDOW_COMBINED GENMASK_ULL(32, 1)
+
static int wwdt_timeout;
static int closed_window_percent;
@@ -54,6 +60,8 @@ MODULE_PARM_DESC(closed_window_percent,
* @xilinx_wwdt_wdd: watchdog device structure
* @freq: source clock frequency of WWDT
* @close_percent: Closed window percent
+ * @closed_timeout: Closed window timeout in ticks
+ * @open_timeout: Open window timeout in ticks
*/
struct xwwdt_device {
void __iomem *base;
@@ -61,27 +69,22 @@ struct xwwdt_device {
struct watchdog_device xilinx_wwdt_wdd;
unsigned long freq;
u32 close_percent;
+ u64 closed_timeout;
+ u64 open_timeout;
};
static int xilinx_wwdt_start(struct watchdog_device *wdd)
{
struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
- u64 time_out, closed_timeout, open_timeout;
u32 control_status_reg;
- /* Calculate timeout count */
- time_out = xdev->freq * wdd->timeout;
- closed_timeout = div_u64(time_out * xdev->close_percent, 100);
- open_timeout = time_out - closed_timeout;
- wdd->min_hw_heartbeat_ms = xdev->close_percent * 10 * wdd->timeout;
-
spin_lock(&xdev->spinlock);
iowrite32(XWWDT_MWR_MASK, xdev->base + XWWDT_MWR_OFFSET);
iowrite32(~(u32)XWWDT_ESR_WEN_MASK, xdev->base + XWWDT_ESR_OFFSET);
- iowrite32((u32)closed_timeout, xdev->base + XWWDT_FWR_OFFSET);
- iowrite32((u32)open_timeout, xdev->base + XWWDT_SWR_OFFSET);
+ iowrite32((u32)xdev->closed_timeout, xdev->base + XWWDT_FWR_OFFSET);
+ iowrite32((u32)xdev->open_timeout, xdev->base + XWWDT_SWR_OFFSET);
/* Enable the window watchdog timer */
control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
@@ -133,7 +136,12 @@ static int xwwdt_probe(struct platform_device *pdev)
struct watchdog_device *xilinx_wwdt_wdd;
struct device *dev = &pdev->dev;
struct xwwdt_device *xdev;
+ u64 max_per_window_ms;
+ u64 min_per_window_ms;
+ u64 timeout_count;
struct clk *clk;
+ u64 timeout_ms;
+ u64 ms_count;
int ret;
xdev = devm_kzalloc(dev, sizeof(*xdev), GFP_KERNEL);
@@ -159,7 +167,8 @@ static int xwwdt_probe(struct platform_device *pdev)
xilinx_wwdt_wdd->min_timeout = XWWDT_MIN_TIMEOUT;
xilinx_wwdt_wdd->timeout = XWWDT_DEFAULT_TIMEOUT;
- xilinx_wwdt_wdd->max_hw_heartbeat_ms = 1000 * xilinx_wwdt_wdd->timeout;
+ xilinx_wwdt_wdd->max_hw_heartbeat_ms =
+ div64_u64(XWWDT_MAX_COUNT_WINDOW_COMBINED, xdev->freq) * 1000;
if (closed_window_percent == 0 || closed_window_percent >= 100)
xdev->close_percent = XWWDT_CLOSE_WINDOW_PERCENT;
@@ -167,6 +176,47 @@ static int xwwdt_probe(struct platform_device *pdev)
xdev->close_percent = closed_window_percent;
watchdog_init_timeout(xilinx_wwdt_wdd, wwdt_timeout, &pdev->dev);
+
+ /* Calculate ticks for 1 milli-second */
+ ms_count = div64_u64(xdev->freq, 1000);
+ timeout_ms = xilinx_wwdt_wdd->timeout * 1000;
+ timeout_count = timeout_ms * ms_count;
+
+ if (timeout_ms > xilinx_wwdt_wdd->max_hw_heartbeat_ms) {
+ /* To avoid ping restrictions until the minimum hardware heartbeat,
+ * we will solely rely on the open window and
+ * adjust the minimum hardware heartbeat to 0.
+ */
+ xdev->closed_timeout = 0;
+ xdev->open_timeout = XWWDT_MAX_COUNT_WINDOW;
+ xilinx_wwdt_wdd->min_hw_heartbeat_ms = 0;
+ xilinx_wwdt_wdd->max_hw_heartbeat_ms = xilinx_wwdt_wdd->max_hw_heartbeat_ms / 2;
+ } else {
+ xdev->closed_timeout = div64_u64(timeout_count * xdev->close_percent, 100);
+ xilinx_wwdt_wdd->min_hw_heartbeat_ms =
+ div64_u64(timeout_ms * xdev->close_percent, 100);
+
+ if (timeout_ms > xilinx_wwdt_wdd->max_hw_heartbeat_ms / 2) {
+ max_per_window_ms = xilinx_wwdt_wdd->max_hw_heartbeat_ms / 2;
+ min_per_window_ms = timeout_ms - max_per_window_ms;
+
+ if (xilinx_wwdt_wdd->min_hw_heartbeat_ms > max_per_window_ms) {
+ dev_info(xilinx_wwdt_wdd->parent,
+ "Closed window cannot be set to %d%%. Using maximum supported value.\n",
+ xdev->close_percent);
+ xdev->closed_timeout = max_per_window_ms * ms_count;
+ xilinx_wwdt_wdd->min_hw_heartbeat_ms = max_per_window_ms;
+ } else if (xilinx_wwdt_wdd->min_hw_heartbeat_ms < min_per_window_ms) {
+ dev_info(xilinx_wwdt_wdd->parent,
+ "Closed window cannot be set to %d%%. Using minimum supported value.\n",
+ xdev->close_percent);
+ xdev->closed_timeout = min_per_window_ms * ms_count;
+ xilinx_wwdt_wdd->min_hw_heartbeat_ms = min_per_window_ms;
+ }
+ }
+ xdev->open_timeout = timeout_count - xdev->closed_timeout;
+ }
+
spin_lock_init(&xdev->spinlock);
watchdog_set_drvdata(xilinx_wwdt_wdd, xdev);
watchdog_set_nowayout(xilinx_wwdt_wdd, 1);
--
2.25.1
Powered by blists - more mailing lists