lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <230f26f2ac8385e8faa543261ac72ffc@mail.infomaniak.com>
Date: Tue, 16 Jul 2024 07:35:36 +0200
From: Stefan Bigler <linux@...ler.io>
To: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
 pabeni@...hat.com, horms@...nel.org, saeedm@...dia.com,
 anthony.l.nguyen@...el.com, netdev@...r.kernel.org,
 linux-kernel@...r.kernel.org, andrew@...n.ch, corbet@....net,
 linux-doc@...r.kernel.org, robh+dt@...nel.org,
 krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
 devicetree@...r.kernel.org, horatiu.vultur@...rochip.com,
 ruanjinjie@...wei.com, steen.hegelund@...rochip.com, vladimir.oltean@....com,
 UNGLinuxDriver@...rochip.com, Thorsten.Kummermehr@...rochip.com,
 Pier.Beruto@...emi.com, Selvamani.Rajagopal@...emi.com,
 Nicolas.Ferre@...rochip.com, benjamin.bigler@...nformulastudent.ch
Subject: Re: [PATCH net-next v4 11/12] microchip: lan865x: add driver support
 for Microchip's LAN865X MAC-PHY

Hi Parthiban

I'm using v4 of the driver an switched from ipv4 to ipv6.
I recognized, that the Neighbor Discovery is not working as expected.
The reason for this is, that the Neighbor Solicitation packet is not recived.
This packet is sent with a Multicast MAC Address.
When I checked the code and compared it to the documentaton the calculation of the Address Hash is not ok.
See Chapter 6.4.6 Hash Addressing

Changing the function lan865x_hash fixed the problem

+static inline u32 getAddrBit(u8 addr[ETH_ALEN], u32 bit)
+{
+       return ((addr[bit/8]) >> (bit % 8)) & 1;
+}
+
 static u32 lan865x_hash(u8 addr[ETH_ALEN])
 {
-       return (ether_crc(ETH_ALEN, addr) >> 26) & GENMASK(5, 0);
+       u32 hash_index = 0;
+       for (int i=0; i<6; i++)
+       {
+               u32 hash = 0;
+               for (int j=0; j<8; j++) {
+                       hash ^= getAddrBit(addr, (j*6)+i);
+               }
+               hash_index |= (hash << i);
+       }
+       return hash_index;
 }

also the fuction lan865x_set_specific_multicast_addr() must be fixed due to the overflow of the mask variable

  static void lan865x_set_specific_multicast_addr(struct net_device *netdev)
@@ -301,15 +315,11 @@ static void lan865x_set_specific_multicast_addr(struct net_device *netdev)
 
 	netdev_for_each_mc_addr(ha, netdev) {
 		u32 bit_num = lan865x_hash(ha->addr);
-		u32 mask = BIT(bit_num);
 
-		/* 5th bit of the 6 bits hash value is used to determine which
-		 * bit to set in either a high or low hash register.
-		 */
-		if (bit_num & BIT(5))
-			hash_hi |= mask;
+		if (bit_num >= 32)
+			hash_hi |= (1 << (bit_num-32));
 		else
-			hash_lo |= mask;
+			hash_lo |= (1 << bit_num);
 	}
 
 	/* Enabling specific multicast addresses */

I would be great if the fix can be included in the new version 5 of your driver.

Thanks a lot and best regards
Stefan


Am 2024-04-18T14:56:47.000+02:00 hat Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com> geschrieben:

>  The LAN8650/1 is designed to conform to the OPEN Alliance 10BASE-T1x
> MAC-PHY Serial Interface specification, Version 1.1. The IEEE Clause 4
> MAC integration provides the low pin count standard SPI interface to any
> microcontroller therefore providing Ethernet functionality without
> requiring MAC integration within the microcontroller. The LAN8650/1
> operates as an SPI client supporting SCLK clock rates up to a maximum of
> 25 MHz. This SPI interface supports the transfer of both data (Ethernet
> frames) and control (register access).
> 
> By default, the chunk data payload is 64 bytes in size. The Ethernet
> Media Access Controller (MAC) module implements a 10 Mbps half duplex
> Ethernet MAC, compatible with the IEEE 802.3 standard. 10BASE-T1S
> physical layer transceiver integrated is into the LAN8650/1. The PHY and
> MAC are connected via an internal Media Independent Interface (MII).
> 
> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
> ---
>  MAINTAINERS                                   |   6 +
>  drivers/net/ethernet/microchip/Kconfig        |   1 +
>  drivers/net/ethernet/microchip/Makefile       |   1 +
>  .../net/ethernet/microchip/lan865x/Kconfig    |  19 +
>  .../net/ethernet/microchip/lan865x/Makefile   |   6 +
>  .../net/ethernet/microchip/lan865x/lan865x.c  | 384 ++++++++++++++++++
>  6 files changed, 417 insertions(+)
>  create mode 100644 drivers/net/ethernet/microchip/lan865x/Kconfig
>  create mode 100644 drivers/net/ethernet/microchip/lan865x/Makefile
>  create mode 100644 drivers/net/ethernet/microchip/lan865x/lan865x.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 603528948f61..f41b7f2257d2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14374,6 +14374,12 @@ L:	netdev@...r.kernel.org
>  S:	Maintained
>  F:	drivers/net/ethernet/microchip/lan743x_*
>  
> +MICROCHIP LAN8650/1 10BASE-T1S MACPHY ETHERNET DRIVER
> +M:	Parthiban Veerasooran <parthiban.veerasooran@...rochip.com>
> +L:	netdev@...r.kernel.org
> +S:	Maintained
> +F:	drivers/net/ethernet/microchip/lan865x/lan865x.c
> +
>  MICROCHIP LAN87xx/LAN937x T1 PHY DRIVER
>  M:	Arun Ramadoss <arun.ramadoss@...rochip.com>
>  R:	UNGLinuxDriver@...rochip.com
> diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
> index 43ba71e82260..06ca79669053 100644
> --- a/drivers/net/ethernet/microchip/Kconfig
> +++ b/drivers/net/ethernet/microchip/Kconfig
> @@ -56,6 +56,7 @@ config LAN743X
>  	  To compile this driver as a module, choose M here. The module will be
>  	  called lan743x.
>  
> +source "drivers/net/ethernet/microchip/lan865x/Kconfig"
>  source "drivers/net/ethernet/microchip/lan966x/Kconfig"
>  source "drivers/net/ethernet/microchip/sparx5/Kconfig"
>  source "drivers/net/ethernet/microchip/vcap/Kconfig"
> diff --git a/drivers/net/ethernet/microchip/Makefile b/drivers/net/ethernet/microchip/Makefile
> index bbd349264e6f..15dfbb321057 100644
> --- a/drivers/net/ethernet/microchip/Makefile
> +++ b/drivers/net/ethernet/microchip/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_LAN743X) += lan743x.o
>  
>  lan743x-objs := lan743x_main.o lan743x_ethtool.o lan743x_ptp.o
>  
> +obj-$(CONFIG_LAN865X) += lan865x/
>  obj-$(CONFIG_LAN966X_SWITCH) += lan966x/
>  obj-$(CONFIG_SPARX5_SWITCH) += sparx5/
>  obj-$(CONFIG_VCAP) += vcap/
> diff --git a/drivers/net/ethernet/microchip/lan865x/Kconfig b/drivers/net/ethernet/microchip/lan865x/Kconfig
> new file mode 100644
> index 000000000000..f3d60d14e202
> --- /dev/null
> +++ b/drivers/net/ethernet/microchip/lan865x/Kconfig
> @@ -0,0 +1,19 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Microchip LAN865x Driver Support
> +#
> +
> +if NET_VENDOR_MICROCHIP
> +
> +config LAN865X
> +	tristate "LAN865x support"
> +	depends on SPI
> +	depends on OA_TC6
> +	help
> +	  Support for the Microchip LAN8650/1 Rev.B1 MACPHY Ethernet chip. It
> +	  uses OPEN Alliance 10BASE-T1x Serial Interface specification.
> +
> +	  To compile this driver as a module, choose M here. The module will be
> +	  called lan865x.
> +
> +endif # NET_VENDOR_MICROCHIP
> diff --git a/drivers/net/ethernet/microchip/lan865x/Makefile b/drivers/net/ethernet/microchip/lan865x/Makefile
> new file mode 100644
> index 000000000000..9f5dd89c1eb8
> --- /dev/null
> +++ b/drivers/net/ethernet/microchip/lan865x/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Makefile for the Microchip LAN865x Driver
> +#
> +
> +obj-$(CONFIG_LAN865X) += lan865x.o
> diff --git a/drivers/net/ethernet/microchip/lan865x/lan865x.c b/drivers/net/ethernet/microchip/lan865x/lan865x.c
> new file mode 100644
> index 000000000000..9abefa8b9d9f
> --- /dev/null
> +++ b/drivers/net/ethernet/microchip/lan865x/lan865x.c
> @@ -0,0 +1,384 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Microchip's LAN865x 10BASE-T1S MAC-PHY driver
> + *
> + * Author: Parthiban Veerasooran <parthiban.veerasooran@...rochip.com>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/phy.h>
> +#include <linux/oa_tc6.h>
> +
> +#define DRV_NAME			"lan865x"
> +
> +/* MAC Network Control Register */
> +#define LAN865X_REG_MAC_NET_CTL		0x00010000
> +#define MAC_NET_CTL_TXEN		BIT(3) /* Transmit Enable */
> +#define MAC_NET_CTL_RXEN		BIT(2) /* Receive Enable */
> +
> +#define LAN865X_REG_MAC_NET_CFG		0x00010001 /* MAC Network Configuration Reg */
> +#define MAC_NET_CFG_PROMISCUOUS_MODE	BIT(4)
> +#define MAC_NET_CFG_MULTICAST_MODE	BIT(6)
> +#define MAC_NET_CFG_UNICAST_MODE	BIT(7)
> +
> +#define LAN865X_REG_MAC_L_HASH		0x00010020 /* MAC Hash Register Bottom */
> +#define LAN865X_REG_MAC_H_HASH		0x00010021 /* MAC Hash Register Top */
> +#define LAN865X_REG_MAC_L_SADDR1	0x00010022 /* MAC Specific Addr 1 Bottom Reg */
> +#define LAN865X_REG_MAC_H_SADDR1	0x00010023 /* MAC Specific Addr 1 Top Reg */
> +
> +/* OPEN Alliance Configuration Register #0 */
> +#define OA_TC6_REG_CONFIG0		0x0004
> +#define CONFIG0_ZARFE_ENABLE		BIT(12)
> +
> +struct lan865x_priv {
> +	struct work_struct multicast_work;
> +	struct net_device *netdev;
> +	struct spi_device *spi;
> +	struct oa_tc6 *tc6;
> +};
> +
> +static int lan865x_set_hw_macaddr_low_bytes(struct oa_tc6 *tc6, const u8 *mac)
> +{
> +	u32 regval;
> +
> +	regval = (mac[3] << 24) | (mac[2] << 16) | (mac[1] << 8) | mac[0];
> +
> +	return oa_tc6_write_register(tc6, LAN865X_REG_MAC_L_SADDR1, regval);
> +}
> +
> +static int lan865x_set_hw_macaddr(struct lan865x_priv *priv, const u8 *mac)
> +{
> +	int restore_ret;
> +	u32 regval;
> +	int ret;
> +
> +	/* Configure MAC address low bytes */
> +	ret = lan865x_set_hw_macaddr_low_bytes(priv->tc6, mac);
> +	if (ret)
> +		return ret;
> +
> +	/* Prepare and configure MAC address high bytes */
> +	regval = (mac[5] << 8) | mac[4];
> +	ret = oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_H_SADDR1, regval);
> +	if (!ret)
> +		return 0;
> +
> +	/* Restore the old MAC address low bytes from netdev if the new MAC
> +	 * address high bytes setting failed.
> +	 */
> +	restore_ret = lan865x_set_hw_macaddr_low_bytes(priv->tc6,
> +						       priv->netdev->dev_addr);
> +	if (restore_ret)
> +		return restore_ret;
> +
> +	return ret;
> +}
> +
> +static void
> +lan865x_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
> +{
> +	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
> +	strscpy(info->bus_info, dev_name(netdev->dev.parent),
> +		sizeof(info->bus_info));
> +}
> +
> +static const struct ethtool_ops lan865x_ethtool_ops = {
> +	.get_drvinfo        = lan865x_get_drvinfo,
> +	.get_link_ksettings = phy_ethtool_get_link_ksettings,
> +	.set_link_ksettings = phy_ethtool_set_link_ksettings,
> +};
> +
> +static int lan865x_set_mac_address(struct net_device *netdev, void *addr)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +	struct sockaddr *address = addr;
> +	int ret;
> +
> +	ret = eth_prepare_mac_addr_change(netdev, addr);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (ether_addr_equal(address->sa_data, netdev->dev_addr))
> +		return 0;
> +
> +	ret = lan865x_set_hw_macaddr(priv, address->sa_data);
> +	if (ret)
> +		return ret;
> +
> +	eth_hw_addr_set(netdev, address->sa_data);
> +
> +	return 0;
> +}
> +
> +static u32 lan865x_hash(u8 addr[ETH_ALEN])
> +{
> +	return (ether_crc(ETH_ALEN, addr) >> 26) & GENMASK(5, 0);
> +}
> +
> +static void lan865x_set_specific_multicast_addr(struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +	struct netdev_hw_addr *ha;
> +	u32 hash_lo = 0;
> +	u32 hash_hi = 0;
> +
> +	netdev_for_each_mc_addr(ha, netdev) {
> +		u32 bit_num = lan865x_hash(ha->addr);
> +		u32 mask = BIT(bit_num);
> +
> +		/* 5th bit of the 6 bits hash value is used to determine which
> +		 * bit to set in either a high or low hash register.
> +		 */
> +		if (bit_num & BIT(5))
> +			hash_hi |= mask;
> +		else
> +			hash_lo |= mask;
> +	}
> +
> +	/* Enabling specific multicast addresses */
> +	if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_H_HASH, hash_hi)) {
> +		netdev_err(netdev, "Failed to write reg_hashh");
> +		return;
> +	}
> +
> +	if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_L_HASH, hash_lo))
> +		netdev_err(netdev, "Failed to write reg_hashl");
> +}
> +
> +static void lan865x_multicast_work_handler(struct work_struct *work)
> +{
> +	struct lan865x_priv *priv = container_of(work, struct lan865x_priv,
> +						 multicast_work);
> +	u32 regval = 0;
> +
> +	if (priv->netdev->flags & IFF_PROMISC) {
> +		/* Enabling promiscuous mode */
> +		regval |= MAC_NET_CFG_PROMISCUOUS_MODE;
> +		regval &= (~MAC_NET_CFG_MULTICAST_MODE);
> +		regval &= (~MAC_NET_CFG_UNICAST_MODE);
> +	} else if (priv->netdev->flags & IFF_ALLMULTI) {
> +		/* Enabling all multicast mode */
> +		regval &= (~MAC_NET_CFG_PROMISCUOUS_MODE);
> +		regval |= MAC_NET_CFG_MULTICAST_MODE;
> +		regval &= (~MAC_NET_CFG_UNICAST_MODE);
> +	} else if (!netdev_mc_empty(priv->netdev)) {
> +		lan865x_set_specific_multicast_addr(priv->netdev);
> +		regval &= (~MAC_NET_CFG_PROMISCUOUS_MODE);
> +		regval &= (~MAC_NET_CFG_MULTICAST_MODE);
> +		regval |= MAC_NET_CFG_UNICAST_MODE;
> +	} else {
> +		/* enabling local mac address only */
> +		if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_H_HASH, 0)) {
> +			netdev_err(priv->netdev, "Failed to write reg_hashh");
> +			return;
> +		}
> +		if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_L_HASH, 0)) {
> +			netdev_err(priv->netdev, "Failed to write reg_hashl");
> +			return;
> +		}
> +	}
> +	if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_NET_CFG, regval))
> +		netdev_err(priv->netdev,
> +			   "Failed to enable promiscuous/multicast/normal mode");
> +}
> +
> +static void lan865x_set_multicast_list(struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +
> +	schedule_work(&priv->multicast_work);
> +}
> +
> +static netdev_tx_t lan865x_send_packet(struct sk_buff *skb,
> +				       struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +
> +	return oa_tc6_start_xmit(priv->tc6, skb);
> +}
> +
> +static int lan865x_hw_disable(struct lan865x_priv *priv)
> +{
> +	u32 regval;
> +
> +	if (oa_tc6_read_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, ®val))
> +		return -ENODEV;
> +
> +	regval &= ~(MAC_NET_CTL_TXEN | MAC_NET_CTL_RXEN);
> +
> +	if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, regval))
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +static int lan865x_net_close(struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +	int ret;
> +
> +	netif_stop_queue(netdev);
> +	phy_stop(netdev->phydev);
> +	ret = lan865x_hw_disable(priv);
> +	if (ret) {
> +		netdev_err(netdev, "Failed to disable the hardware: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int lan865x_hw_enable(struct lan865x_priv *priv)
> +{
> +	u32 regval;
> +
> +	if (oa_tc6_read_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, ®val))
> +		return -ENODEV;
> +
> +	regval |= MAC_NET_CTL_TXEN | MAC_NET_CTL_RXEN;
> +
> +	if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, regval))
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +static int lan865x_net_open(struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +	int ret;
> +
> +	ret = lan865x_hw_enable(priv);
> +	if (ret) {
> +		netdev_err(netdev, "Failed to enable hardware: %d\n", ret);
> +		return ret;
> +	}
> +
> +	phy_start(netdev->phydev);
> +
> +	return 0;
> +}
> +
> +static const struct net_device_ops lan865x_netdev_ops = {
> +	.ndo_open		= lan865x_net_open,
> +	.ndo_stop		= lan865x_net_close,
> +	.ndo_start_xmit		= lan865x_send_packet,
> +	.ndo_set_rx_mode	= lan865x_set_multicast_list,
> +	.ndo_set_mac_address	= lan865x_set_mac_address,
> +};
> +
> +static int lan865x_set_zarfe(struct lan865x_priv *priv)
> +{
> +	u32 regval;
> +	int ret;
> +
> +	ret = oa_tc6_read_register(priv->tc6, OA_TC6_REG_CONFIG0, ®val);
> +	if (ret)
> +		return ret;
> +
> +	/* Set Zero-Align Receive Frame Enable */
> +	regval |= CONFIG0_ZARFE_ENABLE;
> +
> +	return oa_tc6_write_register(priv->tc6, OA_TC6_REG_CONFIG0, regval);
> +}
> +
> +static int lan865x_probe(struct spi_device *spi)
> +{
> +	struct net_device *netdev;
> +	struct lan865x_priv *priv;
> +	int ret;
> +
> +	netdev = alloc_etherdev(sizeof(struct lan865x_priv));
> +	if (!netdev)
> +		return -ENOMEM;
> +
> +	priv = netdev_priv(netdev);
> +	priv->netdev = netdev;
> +	priv->spi = spi;
> +	spi_set_drvdata(spi, priv);
> +	INIT_WORK(&priv->multicast_work, lan865x_multicast_work_handler);
> +
> +	priv->tc6 = oa_tc6_init(spi, netdev);
> +	if (!priv->tc6) {
> +		ret = -ENODEV;
> +		goto free_netdev;
> +	}
> +
> +	/* As per the point s3 in the below errata, SPI receive Ethernet frame
> +	 * transfer may halt when starting the next frame in the same data block
> +	 * (chunk) as the end of a previous frame. The RFA field should be
> +	 * configured to 01b or 10b for proper operation. In these modes, only
> +	 * one receive Ethernet frame will be placed in a single data block.
> +	 * When the RFA field is written to 01b, received frames will be forced
> +	 * to only start in the first word of the data block payload (SWO=0). As
> +	 * recommended, ZARFE bit in the OPEN Alliance CONFIG0 register is set
> +	 * to 1 for proper operation.
> +	 *
> +	 * https://ww1.microchip.com/downloads/aemDocuments/documents/AIS/ProductDocuments/Errata/LAN8650-1-Errata-80001075.pdf
> +	 */
> +	ret = lan865x_set_zarfe(priv);
> +	if (ret) {
> +		dev_err(&spi->dev, "Failed to set ZARFE: %d\n", ret);
> +		goto oa_tc6_exit;
> +	}
> +
> +	/* Get the MAC address from the SPI device tree node */
> +	if (device_get_ethdev_address(&spi->dev, netdev))
> +		eth_hw_addr_random(netdev);
> +
> +	ret = lan865x_set_hw_macaddr(priv, netdev->dev_addr);
> +	if (ret) {
> +		dev_err(&spi->dev, "Failed to configure MAC: %d\n", ret);
> +		goto oa_tc6_exit;
> +	}
> +
> +	netdev->if_port = IF_PORT_10BASET;
> +	netdev->irq = spi->irq;
> +	netdev->netdev_ops = &lan865x_netdev_ops;
> +	netdev->ethtool_ops = &lan865x_ethtool_ops;
> +
> +	ret = register_netdev(netdev);
> +	if (ret) {
> +		dev_err(&spi->dev, "Register netdev failed (ret = %d)", ret);
> +		goto oa_tc6_exit;
> +	}
> +
> +	return 0;
> +
> +oa_tc6_exit:
> +	oa_tc6_exit(priv->tc6);
> +free_netdev:
> +	free_netdev(priv->netdev);
> +	return ret;
> +}
> +
> +static void lan865x_remove(struct spi_device *spi)
> +{
> +	struct lan865x_priv *priv = spi_get_drvdata(spi);
> +
> +	cancel_work_sync(&priv->multicast_work);
> +	unregister_netdev(priv->netdev);
> +	oa_tc6_exit(priv->tc6);
> +	free_netdev(priv->netdev);
> +}
> +
> +static const struct of_device_id lan865x_dt_ids[] = {
> +	{ .compatible = "microchip,lan8651", "microchip,lan8650" },
> +	{ /* Sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, lan865x_dt_ids);
> +
> +static struct spi_driver lan865x_driver = {
> +	.driver = {
> +		.name = DRV_NAME,
> +		.of_match_table = lan865x_dt_ids,
> +	 },
> +	.probe = lan865x_probe,
> +	.remove = lan865x_remove,
> +};
> +module_spi_driver(lan865x_driver);
> +
> +MODULE_DESCRIPTION(DRV_NAME " 10Base-T1S MACPHY Ethernet Driver");
> +MODULE_AUTHOR("Parthiban Veerasooran <parthiban.veerasooran@...rochip.com>");
> +MODULE_LICENSE("GPL");
> -- 
> 2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ