[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMRc=MdaTpCShA2_1m0Gy+OxhHvYd-hNXOZwHgpVAZMT9Yk=kA@mail.gmail.com>
Date: Tue, 16 Jul 2024 14:06:14 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Neil Armstrong <neil.armstrong@...aro.org>
Cc: Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: qcom: sm8650-hdk: use the PMU to power up bluetooth
On Tue, Jul 16, 2024 at 11:45 AM Neil Armstrong
<neil.armstrong@...aro.org> wrote:
>
> Change the HW model in sm8650-hdk.dts to a one closer to reality - where
> the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
> inside the package.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8650-hdk.dts | 26 +++++++++-----------------
> 1 file changed, 9 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
> index 591e6ab9bf5b..127c7aacd4fc 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
> @@ -271,13 +271,10 @@ wcn7850-pmu {
> compatible = "qcom,wcn7850-pmu";
>
> pinctrl-names = "default";
> - pinctrl-0 = <&wlan_en>;
> + pinctrl-0 = <&wlan_en>, <&bt_default>;
>
> wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
> - /*
> - * TODO Add bt-enable-gpios once the Bluetooth driver is
> - * converted to using the power sequencer.
> - */
> + bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
>
> vdd-supply = <&vreg_s4i_0p85>;
> vddio-supply = <&vreg_l15b_1p8>;
> @@ -1272,20 +1269,15 @@ &uart14 {
> bluetooth {
> compatible = "qcom,wcn7850-bt";
>
> - vddio-supply = <&vreg_l3c_1p2>;
> - vddaon-supply = <&vreg_l15b_1p8>;
> - vdddig-supply = <&vreg_s3c_0p9>;
> - vddrfa0p8-supply = <&vreg_s3c_0p9>;
> - vddrfa1p2-supply = <&vreg_s1c_1p2>;
> - vddrfa1p9-supply = <&vreg_s6c_1p8>;
> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> + vddaon-supply = <&vreg_pmu_aon_0p59>;
> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
>
> max-speed = <3200000>;
> -
> - enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
> - swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
> -
> - pinctrl-0 = <&bt_default>;
> - pinctrl-names = "default";
> };
> };
>
>
> --
> 2.34.1
>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Powered by blists - more mailing lists