lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-Id: <1721148848-9784-1-git-send-email-george.kennedy@oracle.com>
Date: Tue, 16 Jul 2024 11:54:08 -0500
From: George Kennedy <george.kennedy@...cle.com>
To: gregkh@...uxfoundation.org, jirislaby@...nel.org, tony@...mide.com,
        andriy.shevchenko@...ux.intel.com, l.sanfilippo@...bus.com,
        tglx@...utronix.de, linux-kernel@...r.kernel.org,
        linux-serial@...r.kernel.org
Cc: george.kennedy@...cle.com, stable@...r.kernel.org,
        harshit.m.mogalapalli@...cle.com
Subject: [PATCH] serial: core: check uartclk for zero to avoid divide by zero

Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.

Oops: divide error: 0000  PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
 <TASK>
serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576
    drivers/tty/serial/8250/8250_port.c:2589)
serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502
    drivers/tty/serial/8250/8250_port.c:2741)
serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)
uart_change_line_settings (./include/linux/spinlock.h:376
    ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)
uart_port_startup (drivers/tty/serial/serial_core.c:342)
uart_startup (drivers/tty/serial/serial_core.c:368)
uart_set_info (drivers/tty/serial/serial_core.c:1034)
uart_set_info_user (drivers/tty/serial/serial_core.c:1059)
tty_set_serial (drivers/tty/tty_io.c:2637)
tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907
    fs/ioctl.c:893 fs/ioctl.c:893)
do_syscall_64 (arch/x86/entry/common.c:52
    (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

Reported-by: syzkaller <syzkaller@...glegroups.com>
Signed-off-by: George Kennedy <george.kennedy@...cle.com>
---
 serial_struct baud_base=0x30000000 will cause the crash.

 drivers/tty/serial/serial_core.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 2a8006e3d687..9967444eae10 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -881,6 +881,14 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
 	new_flags = (__force upf_t)new_info->flags;
 	old_custom_divisor = uport->custom_divisor;
 
+	if (!(uport->flags & UPF_FIXED_PORT)) {
+		unsigned int uartclk = new_info->baud_base * 16;
+		/* check needs to be done here before other settings made */
+		if (uartclk == 0) {
+			retval = -EINVAL;
+			goto exit;
+		}
+	}
 	if (!capable(CAP_SYS_ADMIN)) {
 		retval = -EPERM;
 		if (change_irq || change_port ||
-- 
2.39.3


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ