[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZpfWx4jlZmrA2Tqx@lizhi-Precision-Tower-5810>
Date: Wed, 17 Jul 2024 10:35:51 -0400
From: Frank Li <Frank.li@....com>
To: Alexander Stein <alexander.stein@...tq-group.com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, devicetree@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: imx8-ss-dma: add #address-cells and
#size-cells to LPI2C nodes
On Wed, Jul 17, 2024 at 03:50:25PM +0200, Alexander Stein wrote:
> These properties are required by i2c-controller.yaml bindings.
> Add them on SoC level, rather than on board level.
>
Reviewed-by: Frank Li <Frank.Li@....com>
> Signed-off-by: Alexander Stein <alexander.stein@...tq-group.com>
> ---
> arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> index f7a91d43a0ffe..3f521441faf7e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> @@ -303,6 +303,8 @@ adma_pwm_lpcg: clock-controller@...90000 {
>
> i2c0: i2c@...00000 {
> reg = <0x5a800000 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
> <&i2c0_lpcg IMX_LPCG_CLK_4>;
> @@ -315,6 +317,8 @@ i2c0: i2c@...00000 {
>
> i2c1: i2c@...10000 {
> reg = <0x5a810000 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
> <&i2c1_lpcg IMX_LPCG_CLK_4>;
> @@ -327,6 +331,8 @@ i2c1: i2c@...10000 {
>
> i2c2: i2c@...20000 {
> reg = <0x5a820000 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
> <&i2c2_lpcg IMX_LPCG_CLK_4>;
> @@ -339,6 +345,8 @@ i2c2: i2c@...20000 {
>
> i2c3: i2c@...30000 {
> reg = <0x5a830000 0x4000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
> <&i2c3_lpcg IMX_LPCG_CLK_4>;
> --
> 2.34.1
>
Powered by blists - more mailing lists