| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_JsqJDX+uOSoPh6pTNEP0vBLwcP3bKmAW1wCr_0cVr5fsPcg@mail.gmail.com>
Date: Thu, 18 Jul 2024 08:57:32 -0600
From: Rob Herring <robh@...nel.org>
To: Jarkko Sakkinen <jarkko.sakkinen@....fi>
Cc: Peter Huewe <peterhuewe@....de>, Jarkko Sakkinen <jarkko@...nel.org>, Jason Gunthorpe <jgg@...pe.ca>,
Michael Ellerman <mpe@...erman.id.au>, Nicholas Piggin <npiggin@...il.com>,
Christophe Leroy <christophe.leroy@...roup.eu>, "Naveen N. Rao" <naveen.n.rao@...ux.ibm.com>,
linux-kernel@...r.kernel.org, linux-integrity@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org
Subject: Re: [PATCH] tpm: atmel: Drop PPC64 specific MMIO setup
On Wed, Jul 17, 2024 at 6:14 AM Jarkko Sakkinen <jarkko.sakkinen@....fi> wrote:
>
> On Wed Jul 17, 2024 at 3:08 PM EEST, Jarkko Sakkinen wrote:
> > On Tue Jul 2, 2024 at 7:10 PM EEST, Rob Herring (Arm) wrote:
> > > The PPC64 specific MMIO setup open codes DT address functions rather
> > > than using standard address parsing functions. The open-coded version
> > > fails to handle any address translation and is not endian safe.
> > >
> > > I haven't found any evidence of what platform used this. The only thing
> > > that turned up was a PPC405 platform, but that is 32-bit and PPC405
> > > support is being removed as well. CONFIG_TCG_ATMEL is not enabled for
> > > any powerpc config and never was. The support was added in 2005 and
> > > hasn't been touched since.
> > >
> > > Rather than try to modernize and fix this code, just remove it.
> > >
> > > Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
> > > ---
> > > drivers/char/tpm/Kconfig | 2 +-
> > > drivers/char/tpm/tpm_atmel.c | 64 +++++++++++++++-
> > > drivers/char/tpm/tpm_atmel.h | 140 -----------------------------------
> > > 3 files changed, 62 insertions(+), 144 deletions(-)
> > > delete mode 100644 drivers/char/tpm/tpm_atmel.h
> > >
> > > diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> > > index e63a6a17793c..9b655e9fc7ab 100644
> > > --- a/drivers/char/tpm/Kconfig
> > > +++ b/drivers/char/tpm/Kconfig
> > > @@ -162,7 +162,7 @@ config TCG_NSC
> > >
> > > config TCG_ATMEL
> > > tristate "Atmel TPM Interface"
> > > - depends on PPC64 || HAS_IOPORT_MAP
> > > + depends on HAS_IOPORT_MAP
> > > depends on HAS_IOPORT
> > > help
> > > If you have a TPM security chip from Atmel say Yes and it
> > > diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
> > > index 9fb2defa9dc4..622c4abe8cb3 100644
> > > --- a/drivers/char/tpm/tpm_atmel.c
> > > +++ b/drivers/char/tpm/tpm_atmel.c
> > > @@ -15,7 +15,67 @@
> > > */
> > >
> > > #include "tpm.h"
> > > -#include "tpm_atmel.h"
> > > +
> > > +struct tpm_atmel_priv {
> > > + int region_size;
> > > + int have_region;
> > > + unsigned long base;
> > > + void __iomem *iobase;
> > > +};
> > > +
> > > +#define atmel_getb(chip, offset) inb(atmel_get_priv(chip)->base + offset)
> > > +#define atmel_putb(val, chip, offset) \
> > > + outb(val, atmel_get_priv(chip)->base + offset)
> > > +#define atmel_request_region request_region
> > > +#define atmel_release_region release_region
> > > +/* Atmel definitions */
> > > +enum tpm_atmel_addr {
> > > + TPM_ATMEL_BASE_ADDR_LO = 0x08,
> > > + TPM_ATMEL_BASE_ADDR_HI = 0x09
> > > +};
> > > +
> > > +static inline int tpm_read_index(int base, int index)
> > > +{
> > > + outb(index, base);
> > > + return inb(base+1) & 0xFF;
> > > +}
> > > +
> > > +/* Verify this is a 1.1 Atmel TPM */
> > > +static int atmel_verify_tpm11(void)
> > > +{
> > > +
> > > + /* verify that it is an Atmel part */
> > > + if (tpm_read_index(TPM_ADDR, 4) != 'A' ||
> > > + tpm_read_index(TPM_ADDR, 5) != 'T' ||
> > > + tpm_read_index(TPM_ADDR, 6) != 'M' ||
> > > + tpm_read_index(TPM_ADDR, 7) != 'L')
> > > + return 1;
> > > +
> > > + /* query chip for its version number */
> > > + if (tpm_read_index(TPM_ADDR, 0x00) != 1 ||
> > > + tpm_read_index(TPM_ADDR, 0x01) != 1)
> > > + return 1;
> > > +
> > > + /* This is an atmel supported part */
> > > + return 0;
> > > +}
> > > +
> > > +/* Determine where to talk to device */
> > > +static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
> > > +{
> > > + int lo, hi;
> > > +
> > > + if (atmel_verify_tpm11() != 0)
> > > + return NULL;
> > > +
> > > + lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
> > > + hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
> > > +
> > > + *base = (hi << 8) | lo;
> > > + *region_size = 2;
> > > +
> > > + return ioport_map(*base, *region_size);
> > > +}
> > >
> > > /* write status bits */
> > > enum tpm_atmel_write_status {
> > > @@ -142,7 +202,6 @@ static void atml_plat_remove(void)
> > > tpm_chip_unregister(chip);
> > > if (priv->have_region)
> > > atmel_release_region(priv->base, priv->region_size);
> > > - atmel_put_base_addr(priv->iobase);
> > > platform_device_unregister(pdev);
> > > }
> > >
> > > @@ -211,7 +270,6 @@ static int __init init_atmel(void)
> > > err_unreg_dev:
> > > platform_device_unregister(pdev);
> > > err_rel_reg:
> > > - atmel_put_base_addr(iobase);
> > > if (have_region)
> > > atmel_release_region(base,
> > > region_size);
> > > diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
> > > deleted file mode 100644
> > > index 7ac3f69dcf0f..000000000000
> > > --- a/drivers/char/tpm/tpm_atmel.h
> > > +++ /dev/null
> > > @@ -1,140 +0,0 @@
> > > -/* SPDX-License-Identifier: GPL-2.0-only */
> > > -/*
> > > - * Copyright (C) 2005 IBM Corporation
> > > - *
> > > - * Authors:
> > > - * Kylene Hall <kjhall@...ibm.com>
> > > - *
> > > - * Maintained by: <tpmdd-devel@...ts.sourceforge.net>
> > > - *
> > > - * Device driver for TCG/TCPA TPM (trusted platform module).
> > > - * Specifications at www.trustedcomputinggroup.org
> > > - *
> > > - * These difference are required on power because the device must be
> > > - * discovered through the device tree and iomap must be used to get
> > > - * around the need for holes in the io_page_mask. This does not happen
> > > - * automatically because the tpm is not a normal pci device and lives
> > > - * under the root node.
> > > - */
> > > -
> > > -struct tpm_atmel_priv {
> > > - int region_size;
> > > - int have_region;
> > > - unsigned long base;
> > > - void __iomem *iobase;
> > > -};
> > > -
> > > -#ifdef CONFIG_PPC64
> > > -
> > > -#include <linux/of.h>
> > > -
> > > -#define atmel_getb(priv, offset) readb(priv->iobase + offset)
> > > -#define atmel_putb(val, priv, offset) writeb(val, priv->iobase + offset)
> > > -#define atmel_request_region request_mem_region
> > > -#define atmel_release_region release_mem_region
> > > -
> > > -static inline void atmel_put_base_addr(void __iomem *iobase)
> > > -{
> > > - iounmap(iobase);
> > > -}
> > > -
> > > -static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
> > > -{
> > > - struct device_node *dn;
> > > - unsigned long address, size;
> > > - const unsigned int *reg;
> > > - int reglen;
> > > - int naddrc;
> > > - int nsizec;
> > > -
> > > - dn = of_find_node_by_name(NULL, "tpm");
> > > -
> > > - if (!dn)
> > > - return NULL;
> > > -
> > > - if (!of_device_is_compatible(dn, "AT97SC3201")) {
> > > - of_node_put(dn);
> > > - return NULL;
> > > - }
> > > -
> > > - reg = of_get_property(dn, "reg", ®len);
> > > - naddrc = of_n_addr_cells(dn);
> > > - nsizec = of_n_size_cells(dn);
> > > -
> > > - of_node_put(dn);
> > > -
> > > -
> > > - if (naddrc == 2)
> > > - address = ((unsigned long) reg[0] << 32) | reg[1];
> > > - else
> > > - address = reg[0];
> > > -
> > > - if (nsizec == 2)
> > > - size =
> > > - ((unsigned long) reg[naddrc] << 32) | reg[naddrc + 1];
> > > - else
> > > - size = reg[naddrc];
> > > -
> > > - *base = address;
> > > - *region_size = size;
> > > - return ioremap(*base, *region_size);
> > > -}
> > > -#else
> > > -#define atmel_getb(chip, offset) inb(atmel_get_priv(chip)->base + offset)
> > > -#define atmel_putb(val, chip, offset) \
> > > - outb(val, atmel_get_priv(chip)->base + offset)
> > > -#define atmel_request_region request_region
> > > -#define atmel_release_region release_region
> > > -/* Atmel definitions */
> > > -enum tpm_atmel_addr {
> > > - TPM_ATMEL_BASE_ADDR_LO = 0x08,
> > > - TPM_ATMEL_BASE_ADDR_HI = 0x09
> > > -};
> > > -
> > > -static inline int tpm_read_index(int base, int index)
> > > -{
> > > - outb(index, base);
> > > - return inb(base+1) & 0xFF;
> > > -}
> > > -
> > > -/* Verify this is a 1.1 Atmel TPM */
> > > -static int atmel_verify_tpm11(void)
> > > -{
> > > -
> > > - /* verify that it is an Atmel part */
> > > - if (tpm_read_index(TPM_ADDR, 4) != 'A' ||
> > > - tpm_read_index(TPM_ADDR, 5) != 'T' ||
> > > - tpm_read_index(TPM_ADDR, 6) != 'M' ||
> > > - tpm_read_index(TPM_ADDR, 7) != 'L')
> > > - return 1;
> > > -
> > > - /* query chip for its version number */
> > > - if (tpm_read_index(TPM_ADDR, 0x00) != 1 ||
> > > - tpm_read_index(TPM_ADDR, 0x01) != 1)
> > > - return 1;
> > > -
> > > - /* This is an atmel supported part */
> > > - return 0;
> > > -}
> > > -
> > > -static inline void atmel_put_base_addr(void __iomem *iobase)
> > > -{
> > > -}
> > > -
> > > -/* Determine where to talk to device */
> > > -static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
> > > -{
> > > - int lo, hi;
> > > -
> > > - if (atmel_verify_tpm11() != 0)
> > > - return NULL;
> > > -
> > > - lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
> > > - hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
> > > -
> > > - *base = (hi << 8) | lo;
> > > - *region_size = 2;
> > > -
> > > - return ioport_map(*base, *region_size);
> > > -}
> > > -#endif
> >
> > Responding from holidays but:
> >
> > Reviewed-by: Jarkko Sakkinen <jarkko@...nel.org>
> >
> > [still away for couple of weeks]
>
> I got these in with checkpatch.pl --strict:
>
> CHECK: Macro argument 'offset' may be better as '(offset)' to avoid precedence issues
> #59: FILE: drivers/char/tpm/tpm_atmel.c:26:
> +#define atmel_getb(chip, offset) inb(atmel_get_priv(chip)->base + offset)
>
> CHECK: Macro argument 'offset' may be better as '(offset)' to avoid precedence issues
> #60: FILE: drivers/char/tpm/tpm_atmel.c:27:
> +#define atmel_putb(val, chip, offset) \
> + outb(val, atmel_get_priv(chip)->base + offset)
>
> CHECK: spaces preferred around that '+' (ctx:VxV)
> #73: FILE: drivers/char/tpm/tpm_atmel.c:40:
> + return inb(base+1) & 0xFF;
> ^
>
> CHECK: Blank lines aren't necessary after an open brace '{'
> #79: FILE: drivers/char/tpm/tpm_atmel.c:46:
> +{
> +
>
> Can you address them and I'll tag the next version, once I've
> revisited checkpatch. Otherwise, nothing against the code change.
Those all existed before because I just moved what was left of the
header contents into the .c file. Fixing them seems like a separate
change to me. I can just leave the header in place and avoid the
warnings if you prefer. Otherwise, those warnings are the least of the
clean-up this driver needs. For starters, I would make those defines
static inlines instead.
Rob
Powered by blists - more mailing lists