lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMRc=MeKdg-MnO_kNkgpwbuSgL0mfAw8HveGFKFwUeNd6379bQ@mail.gmail.com>
Date: Thu, 18 Jul 2024 16:59:27 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Jon Hunter <jonathanh@...dia.com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>, 
	Russell King <linux@...linux.org.uk>, "David S . Miller" <davem@...emloft.net>, 
	Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org, 
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>, 
	"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>, Brad Griffis <bgriffis@...dia.com>
Subject: Re: [RESEND PATCH net-next v3 3/4] net: phy: aquantia: wait for the
 GLOBAL_CFG to start returning real values

On Thu, Jul 18, 2024 at 4:49 PM Jon Hunter <jonathanh@...dia.com> wrote:
>
>
> On 18/07/2024 15:13, Bartosz Golaszewski wrote:
> > On Thu, Jul 18, 2024 at 4:08 PM Jon Hunter <jonathanh@...dia.com> wrote:
> >>
> >>
> >> On 18/07/2024 14:29, Bartosz Golaszewski wrote:
> >>> On Thu, Jul 18, 2024 at 3:04 PM Bartosz Golaszewski <brgl@...ev.pl> wrote:
> >>>>
> >>>> On Thu, Jul 18, 2024 at 2:23 PM Jon Hunter <jonathanh@...dia.com> wrote:
> >>>>>
> >>>>>
> >>>>> With the current -next and mainline we are seeing the following issue on
> >>>>> our Tegra234 Jetson AGX Orin platform ...
> >>>>>
> >>>>>     Aquantia AQR113C stmmac-0:00: aqr107_fill_interface_modes failed: -110
> >>>>>     tegra-mgbe 6800000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -110)
> >>>>>
> >>>>>
> >>>>> We have tracked it down to this change and looks like our PHY does not
> >>>>> support 10M ...
> >>>>>
> >>>>> $ ethtool eth0
> >>>>> Settings for eth0:
> >>>>>            Supported ports: [  ]
> >>>>>            Supported link modes:   100baseT/Full
> >>>>>                                    1000baseT/Full
> >>>>>                                    10000baseT/Full
> >>>>>                                    1000baseKX/Full
> >>>>>                                    10000baseKX4/Full
> >>>>>                                    10000baseKR/Full
> >>>>>                                    2500baseT/Full
> >>>>>                                    5000baseT/Full
> >>>>>
> >>>>> The following fixes this for this platform ...
> >>>>>
> >>>>> diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
> >>>>> index d12e35374231..0b2db486d8bd 100644
> >>>>> --- a/drivers/net/phy/aquantia/aquantia_main.c
> >>>>> +++ b/drivers/net/phy/aquantia/aquantia_main.c
> >>>>> @@ -656,7 +656,7 @@ static int aqr107_fill_interface_modes(struct phy_device *phydev)
> >>>>>            int i, val, ret;
> >>>>>
> >>>>>            ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
> >>>>> -                                       VEND1_GLOBAL_CFG_10M, val, val != 0,
> >>>>> +                                       VEND1_GLOBAL_CFG_100M, val, val != 0,
> >>>>>                                            1000, 100000, false);
> >>>>>            if (ret)
> >>>>>                    return ret;
> >>>>>
> >>>>>
> >>>>> However, I am not sure if this is guaranteed to work for all?
> >>>>
> >>>> Ah cr*p. No, I don't think it is. We should take the first supported
> >>>> mode for a given PHY I think.
> >>>>
> >>>
> >>> TBH I only observed the issue on AQR115C. I don't have any other model
> >>> to test with. Is it fine to fix it by implementing
> >>> aqr115_fill_interface_modes() that would first wait for this register
> >>> to return non-0 and then call aqr107_fill_interface_modes()?
> >>
> >> I am doing a bit more testing. We have seen a few issues with this PHY
> >> driver and so I am wondering if we also need something similar for the
> >> AQR113C variant too.
> >>
> >> Interestingly, the product brief for these PHYs [0] do show that both
> >> the AQR113C and AQR115C both support 10M. So I wonder if it is our
> >> ethernet controller that is not supporting 10M? I will check on this too.
> >>
> >
> > Oh you have an 113c? I didn't get this. Yeah, weird, all docs say it
> > should support 10M. In fact all AQR PHYs should hence my initial
> > change.
>
>
> Yes we have an AQR113C. I agree it should support this, but for whatever
> reason this is not advertised. I do see that 10M is advertised as
> supported by the network ...
>
>   Link partner advertised link modes:  10baseT/Half 10baseT/Full
>                                        100baseT/Half 100baseT/Full
>                                        1000baseT/Full
>
> My PC that is on the same network supports 10M, but just not this Tegra
> device. I am checking to see if this is expected for this device.
>

I sent a patch for you to test. I think that even if it doesn't fully
fix the issue you're observing, it's worth picking it up as it reduces
the impact of the workaround I introduced.

I'll be off next week so I'm sending it quickly with the hope it will be useful.

Bart

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ