lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: 
 <BY3PR18MB47078CCD43FD8B1DB6D9AE78A0AC2@BY3PR18MB4707.namprd18.prod.outlook.com>
Date: Thu, 18 Jul 2024 18:43:05 +0000
From: Sai Krishna Gajula <saikrishnag@...vell.com>
To: "yang.li@...ogic.com" <yang.li@...ogic.com>,
        Marcel Holtmann
	<marcel@...tmann.org>,
        Luiz Augusto von Dentz <luiz.dentz@...il.com>,
        "David
 S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>, Jakub
 Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, Rob Herring
	<robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
	<conor+dt@...nel.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon
	<will@...nel.org>
CC: "linux-bluetooth@...r.kernel.org" <linux-bluetooth@...r.kernel.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org"
	<linux-arm-kernel@...ts.infradead.org>,
        Ye He <ye.he@...ogic.com>
Subject: RE: [PATCH v2 2/3] Bluetooth: hci_uart: Add support for Amlogic HCI
 UART


> -----Original Message-----
> From: Yang Li via B4 Relay <devnull+yang.li.amlogic.com@...nel.org>
> Sent: Thursday, July 18, 2024 1:12 PM
> To: Marcel Holtmann <marcel@...tmann.org>; Luiz Augusto von Dentz
> <luiz.dentz@...il.com>; David S. Miller <davem@...emloft.net>; Eric
> Dumazet <edumazet@...gle.com>; Jakub Kicinski <kuba@...nel.org>; Paolo
> Abeni <pabeni@...hat.com>; Rob Herring <robh@...nel.org>; Krzysztof
> Kozlowski <krzk+dt@...nel.org>; Conor Dooley <conor+dt@...nel.org>;
> Catalin Marinas <catalin.marinas@....com>; Will Deacon <will@...nel.org>
> Cc: linux-bluetooth@...r.kernel.org; netdev@...r.kernel.org;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; Yang Li <yang.li@...ogic.com>; Ye He
> <ye.he@...ogic.com>
> Subject: [PATCH v2 2/3] Bluetooth: hci_uart: Add support for
> Amlogic HCI UART
> 
> From: Yang Li <yang. li@ amlogic. com> This patch introduces support for
> Amlogic Bluetooth controller over UART. In order to send the final firmware at
> full speed. It is a pretty straight forward H4 driver with exception of actually
> having 
> From: Yang Li <yang.li@...ogic.com>
> 
> This patch introduces support for Amlogic Bluetooth controller over UART. In
> order to send the final firmware at full speed. It is a pretty straight forward H4
> driver with exception of actually having it's own setup address configuration.
> 
> Co-developed-by: Ye He <ye.he@...ogic.com>
> Signed-off-by: Ye He <ye.he@...ogic.com>
> Signed-off-by: Yang Li <yang.li@...ogic.com>
> ---
>  drivers/bluetooth/Kconfig     |  12 +
>  drivers/bluetooth/Makefile    |   1 +
>  drivers/bluetooth/hci_aml.c   | 772
> ++++++++++++++++++++++++++++++++++++++++++
>  drivers/bluetooth/hci_ldisc.c |   8 +-
>  drivers/bluetooth/hci_uart.h  |   8 +-
>  5 files changed, 798 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index
> 90a94a111e67..d9ff7a64d032 100644
> --- a/drivers/bluetooth/Kconfig
> +++ b/drivers/bluetooth/Kconfig
> @@ -274,6 +274,18 @@ config BT_HCIUART_MRVL
> 
>  	  Say Y here to compile support for HCI MRVL protocol.
> 
> +config BT_HCIUART_AML
> +	bool "Amlogic protocol support"
> +	depends on BT_HCIUART
> +	depends on BT_HCIUART_SERDEV
> +	select BT_HCIUART_H4
> +	select FW_LOADER
> +	help
> +	  The Amlogic protocol support enables Bluetooth HCI over serial
> +	  port interface for Amlogic Bluetooth controllers.
> +
> +	  Say Y here to compile support for HCI AML protocol.
> +
>  config BT_HCIBCM203X
>  	tristate "HCI BCM203x USB driver"
>  	depends on USB
> diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index
> 0730d6684d1a..81856512ddd0 100644
> --- a/drivers/bluetooth/Makefile
> +++ b/drivers/bluetooth/Makefile
> @@ -51,4 +51,5 @@ hci_uart-$(CONFIG_BT_HCIUART_BCM)	+= hci_bcm.o
>  hci_uart-$(CONFIG_BT_HCIUART_QCA)	+= hci_qca.o
>  hci_uart-$(CONFIG_BT_HCIUART_AG6XX)	+= hci_ag6xx.o
>  hci_uart-$(CONFIG_BT_HCIUART_MRVL)	+= hci_mrvl.o
> +hci_uart-$(CONFIG_BT_HCIUART_AML)	+= hci_aml.o
>  hci_uart-objs				:= $(hci_uart-y)
> diff --git a/drivers/bluetooth/hci_aml.c b/drivers/bluetooth/hci_aml.c new file
> mode 100644 index 000000000000..575b6361dad6
> --- /dev/null
> +++ b/drivers/bluetooth/hci_aml.c
> @@ -0,0 +1,772 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
> +/*
> + * Copyright (C) 2024 Amlogic, Inc. All rights reserved  */
> +
> +#include <linux/kernel.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/property.h>

......

> + * op_code |      op_len           | op_addr | parameter   |
> + * --------|-----------------------|---------|-------------|
> + *   2B    | 1B len(addr+param)    |    4B   |  len(param) |
> + */
> +static int aml_send_tci_cmd(struct hci_dev *hdev, u16 op_code, u32
> op_addr,
> +			    u32 *param, u32 param_len)
> +{
> +	struct sk_buff *skb = NULL;
> +	struct aml_tci_rsp *rsp = NULL;
> +	u8 *buf = NULL;
> +	u32 buf_len = 0;
> +	int err = 0;

Please consider using reverse xmas tree order - longest line to shortest - for local variable declarations in Networking code.

> +
> +	buf_len = sizeof(op_addr) + param_len;
> +	buf = kmalloc(buf_len, GFP_KERNEL);
> +	if (!buf) {
> +		err = -ENOMEM;
> +		goto exit;
> +	}
> +
> +	memcpy(buf, &op_addr, sizeof(op_addr));
> +	if (param && param_len > 0)
> +		memcpy(buf + sizeof(op_addr), param, param_len);
> +
> +	skb = __hci_cmd_sync_ev(hdev, op_code, buf_len, buf,
> +				HCI_EV_CMD_COMPLETE,
> HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		skb = NULL;

Better to capture the error before nullifying skb, like below
	err = PTR_ERR(skb);
	skb = NULL;  // Nullify after capturing the error

> +		bt_dev_err(hdev, "Failed to send TCI cmd:(%d)", err);
> +		goto exit;
> +	}
> +
> +	rsp = (struct aml_tci_rsp *)(skb->data);
> +	if (rsp->opcode != op_code || rsp->status != 0x00) {
> +		bt_dev_err(hdev, "send TCI cmd(0x%04X),
> response(0x%04X):(%d)",
> +		       op_code, rsp->opcode, rsp->status);
> +		err = -EINVAL;
> +		goto exit;
> +	}
> +
> +exit:
> +	kfree(buf);
> +	kfree_skb(skb);
> +	return err;
> +}
> +
> +static int aml_update_chip_baudrate(struct hci_dev *hdev, u32 baud) {
> +	u32 value;
> +
> +	value = ((AML_UART_CLK_SOURCE / baud) - 1) & 0x0FFF;
> +	value |= AML_UART_XMIT_EN | AML_UART_RECV_EN |
> +AML_UART_TIMEOUT_INT_EN;
> +
> +	return aml_send_tci_cmd(hdev, AML_TCI_CMD_UPDATE_BAUDRATE,
> +				  AML_OP_UART_MODE, &value,
> sizeof(value)); }
> +
> +static int aml_start_chip(struct hci_dev *hdev) {
> +	u32 value = 0;
> +	int ret;
> +
> +	value = AML_MM_CTR_HARD_TRAS_EN;
> +	ret = aml_send_tci_cmd(hdev, AML_TCI_CMD_WRITE,
> +			       AML_OP_MEM_HARD_TRANS_EN,
> +			       &value, sizeof(value));
> +	if (ret)
> +		return ret;
> +
> +	/* controller hardware reset. */
> +	value = AML_CTR_CPU_RESET | AML_CTR_MAC_RESET |
> AML_CTR_PHY_RESET;
> +	ret = aml_send_tci_cmd(hdev, AML_TCI_CMD_HARDWARE_RESET,
> +			       AML_OP_HARDWARE_RST,
> +			       &value, sizeof(value));
> +	return ret;
> +}
> +
> +static int aml_send_firmware_segment(struct hci_dev *hdev,
> +				     u8 fw_type,
> +				     u8 *seg,
> +				     u32 seg_size,
> +				     u32 offset)
> +{
> +	u32 op_addr = 0;
> +
> +	if (fw_type == FW_ICCM)
> +		op_addr = AML_OP_ICCM_RAM_BASE  + offset;
> +	else if (fw_type == FW_DCCM)
> +		op_addr = AML_OP_DCCM_RAM_BASE + offset;
> +
> +	return aml_send_tci_cmd(hdev, AML_TCI_CMD_DOWNLOAD_BT_FW,
> +			     op_addr, (u32 *)seg, seg_size); }
> +
> +static int aml_send_firmware(struct hci_dev *hdev, u8 fw_type,
> +			     u8 *fw, u32 fw_size, u32 offset) {
> +	u32 seg_size = 0;
> +	u32 seg_off = 0;
> +
> +	if (fw_size > AML_FIRMWARE_MAX_SIZE) {
> +		bt_dev_err(hdev, "fw_size error, fw_size:%d, max_size: 512K",
> +		       fw_size);
> +		return -EINVAL;
> +	}
> +	while (fw_size > 0) {
> +		seg_size = (fw_size > AML_FIRMWARE_OPERATION_SIZE) ?
> +			   AML_FIRMWARE_OPERATION_SIZE : fw_size;
> +		if (aml_send_firmware_segment(hdev, fw_type, (fw +
> seg_off),
> +					      seg_size, offset)) {
> +			bt_dev_err(hdev, "Failed send firmware, type:%d,
> offset:0x%x",
> +			       fw_type, offset);
> +			return -EINVAL;
> +		}
> +		seg_off += seg_size;
> +		fw_size -= seg_size;
> +		offset += seg_size;
> +	}
> +	return 0;
> +}
> +
> +static int aml_download_firmware(struct hci_dev *hdev, const char
> +*fw_name) {
> +	struct hci_uart *hu = hci_get_drvdata(hdev);
> +	struct aml_serdev *amldev = serdev_device_get_drvdata(hu-
> >serdev);
> +	const struct firmware *firmware = NULL;
> +	struct aml_fw_len *fw_len = NULL;
> +	u8 *iccm_start = NULL, *dccm_start = NULL;
> +	u32 iccm_len, dccm_len;
> +	u32 value = 0;
> +	int ret = 0;
> +

Please consider using reverse xmas tree order - longest line to shortest - for local variable declarations in Networking code.

> +	/* Enable firmware download event. */
> +	value = AML_EVT_EN;
> +	ret = aml_send_tci_cmd(hdev, AML_TCI_CMD_WRITE,
> +			       AML_OP_EVT_ENABLE,
> +			       &value, sizeof(value));
> +	if (ret)
> +		goto exit;
> +
> +	/* RAM power on */
> +	value = AML_RAM_POWER_ON;
> +	ret = aml_send_tci_cmd(hdev, AML_TCI_CMD_WRITE,
> +			       AML_OP_RAM_POWER_CTR,
> +			       &value, sizeof(value));
> +	if (ret)
> +		goto exit;
> +
> +	/* Check RAM power status */
> +	ret = aml_send_tci_cmd(hdev, AML_TCI_CMD_READ,
> +			       AML_OP_RAM_POWER_CTR, NULL, 0);
> +	if (ret)
> +		goto exit;
> +
> +	ret = request_firmware(&firmware, fw_name, &hdev->dev);
> +	if (ret < 0) {
> +		bt_dev_err(hdev, "Failed to load <%s>:(%d)", fw_name, ret);
> +		goto exit;
> +	}
> +
> +	fw_len = (struct aml_fw_len *)firmware->data;
> +
> +	/* Download ICCM */
> +	iccm_start = (u8 *)(firmware->data) + sizeof(struct aml_fw_len)
> +			+ amldev->aml_dev_data->iccm_offset;
> +	iccm_len = fw_len->iccm_len - amldev->aml_dev_data->iccm_offset;
> +	ret = aml_send_firmware(hdev, FW_ICCM, iccm_start, iccm_len,
> +				amldev->aml_dev_data->iccm_offset);
> +	if (ret) {
> +		bt_dev_err(hdev, "Failed to send FW_ICCM (%d)", ret);
> +		goto exit;
> +	}
> +
> +	/* Download DCCM */
> +	dccm_start = (u8 *)(firmware->data) + sizeof(struct aml_fw_len) +
> fw_len->iccm_len;
> +	dccm_len = fw_len->dccm_len;
> +	ret = aml_send_firmware(hdev, FW_DCCM, dccm_start, dccm_len,
> +				amldev->aml_dev_data->dccm_offset);
> +	if (ret) {
> +		bt_dev_err(hdev, "Failed to send FW_DCCM (%d)", ret);
> +		goto exit;
> +	}
> +
> +	/* Disable firmware download event. */
> +	value = 0;
> +	ret = aml_send_tci_cmd(hdev, AML_TCI_CMD_WRITE,
> +			       AML_OP_EVT_ENABLE,
> +			       &value, sizeof(value));
> +	if (ret)
> +		goto exit;
> +
> +exit:
> +	if (firmware)
> +		release_firmware(firmware);
> +	return ret;
> +}
> +
> +static int aml_send_reset(struct hci_dev *hdev) {
> +	struct sk_buff *skb;
> +	int err;
> +
> +	skb = __hci_cmd_sync_ev(hdev, HCI_OP_RESET, 0, NULL,
> +				HCI_EV_CMD_COMPLETE,
> HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hdev, "Failed to send hci reset cmd(%d)", err);
> +		return err;
> +	}
> +
> +	kfree_skb(skb);
> +	return 0;
> +}
> +
> +static int aml_dump_fw_version(struct hci_dev *hdev) {
> +	struct sk_buff *skb;
> +	struct aml_tci_rsp *rsp = NULL;
> +	u8 value[6] = {0};
> +	u8 *fw_ver = NULL;
> +	int err = 0;
> +

Please consider using reverse xmas tree order - longest line to shortest - for local variable declarations in Networking code.

> +	skb = __hci_cmd_sync_ev(hdev, AML_BT_HCI_VENDOR_CMD,
> sizeof(value), value,
> +				HCI_EV_CMD_COMPLETE,
> HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		skb = NULL;
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hdev, "Failed get fw version:(%d)", err);
> +		goto exit;
> +	}
> +
> +	rsp = (struct aml_tci_rsp *)(skb->data);
> +	if (rsp->opcode != AML_BT_HCI_VENDOR_CMD || rsp->status !=
> 0x00) {
> +		bt_dev_err(hdev, "dump version, error response
> (0x%04X):(%d)",
> +		       rsp->opcode, rsp->status);
> +		err = -EINVAL;
> +		goto exit;
> +	}
> +
> +	fw_ver = skb->data + AML_EVT_HEAD_SIZE;
> +	bt_dev_info(hdev, "fw_version: date = %02x.%02x, number =
> 0x%02x%02x",
> +		*(fw_ver + 1), *fw_ver, *(fw_ver + 3), *(fw_ver + 2));
> +
> +exit:
> +	kfree_skb(skb);
> +	return err;
> +}
> +
> +static int aml_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> +{
> +	struct sk_buff *skb;
> +	struct aml_tci_rsp *rsp = NULL;
> +	int err = 0;
> +

Please consider using reverse xmas tree order - longest line to shortest - for local variable declarations in Networking code.

> +	bt_dev_info(hdev, "set bdaddr (%pM)", bdaddr);
> +	skb = __hci_cmd_sync_ev(hdev, AML_BT_HCI_VENDOR_CMD,
> +				sizeof(bdaddr_t), bdaddr,
> +				HCI_EV_CMD_COMPLETE,
> HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		skb = NULL;
> +		err = PTR_ERR(skb);

Same here to capture error before making skb null.

> +		bt_dev_err(hdev, "Failed to set bdaddr:(%d)", err);
> +		goto exit;
> +	}
> +
> +	rsp = (struct aml_tci_rsp *)(skb->data);
> +	if (rsp->opcode != AML_BT_HCI_VENDOR_CMD || rsp->status !=
> 0x00) {
> +		bt_dev_err(hdev, "error response (0x%x):(%d)", rsp->opcode,
> rsp->status);
> +		err = -EINVAL;
> +		goto exit;
> +	}
> +
> +exit:
> +	kfree_skb(skb);
> +	return err;
> +}
> +
> +static int aml_check_bdaddr(struct hci_dev *hdev) {

.......

> +
> +static int aml_close(struct hci_uart *hu) {
> +	struct aml_data *aml_data = hu->priv;
> +	struct aml_serdev *amldev = serdev_device_get_drvdata(hu-
> >serdev);

Please consider using reverse xmas tree order - longest line to shortest - for local variable declarations in Networking code.

> +
> +	if (hu->serdev)
> +		serdev_device_close(hu->serdev);
> +
> +	skb_queue_purge(&aml_data->txq);
> +	kfree_skb(aml_data->rx_skb);
> +	kfree(aml_data);
> +
> +	hu->priv = NULL;
> +
> +	return aml_power_off(amldev);
> +}

.......

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ