| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fa5bd4cb-6d5c-4cb7-bb41-3c277e291cd6@arm.com>
Date: Fri, 19 Jul 2024 08:47:58 +0100
From: Ryan Roberts <ryan.roberts@....com>
To: Barry Song <baohua@...nel.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>, Hugh Dickins
<hughd@...gle.com>, Jonathan Corbet <corbet@....net>,
"Matthew Wilcox (Oracle)" <willy@...radead.org>,
David Hildenbrand <david@...hat.com>, Lance Yang <ioworker0@...il.com>,
Baolin Wang <baolin.wang@...ux.alibaba.com>, Gavin Shan <gshan@...hat.com>,
Pankaj Raghav <kernel@...kajraghav.com>, Daniel Gomez
<da.gomez@...sung.com>, linux-kernel@...r.kernel.org, linux-mm@...ck.org
Subject: Re: [RFC PATCH v1 3/4] mm: Override mTHP "enabled" defaults at kernel
cmdline
On 19/07/2024 01:46, Barry Song wrote:
> On Wed, Jul 17, 2024 at 7:13 PM Ryan Roberts <ryan.roberts@....com> wrote:
>>
>> Add thp_anon= cmdline parameter to allow specifying the default
>> enablement of each supported anon THP size. The parameter accepts the
>> following format and can be provided multiple times to configure each
>> size:
>>
>> thp_anon=<size>[KMG]:<value>
>>
>> See Documentation/admin-guide/mm/transhuge.rst for more details.
>>
>> Configuring the defaults at boot time is useful to allow early user
>> space to take advantage of mTHP before its been configured through
>> sysfs.
>
> This is exactly what I need and want to implement, as the current behavior
> is problematic. We need to boot up the system and reach the point where
> we can set up the sys interfaces to enable mTHP. Many processes miss the
> opportunity to use mTHP.
>
> On the other hand, userspace might have been tuned to detect that mTHP
> is enabled, such as a .so library. However, it turns out we have had
> inconsistent settings between the two stages - before and after setting
> mTHP enabled by sys interfaces.
Good feedback - sounds like I should separate out this patch from the rest of
the series to get it reviewed and merged faster?
>
>>
>> Signed-off-by: Ryan Roberts <ryan.roberts@....com>
>> ---
>> .../admin-guide/kernel-parameters.txt | 8 +++
>> Documentation/admin-guide/mm/transhuge.rst | 26 +++++++--
>> mm/huge_memory.c | 55 ++++++++++++++++++-
>> 3 files changed, 82 insertions(+), 7 deletions(-)
>>
>> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
>> index bc55fb55cd26..48443ad12e3f 100644
>> --- a/Documentation/admin-guide/kernel-parameters.txt
>> +++ b/Documentation/admin-guide/kernel-parameters.txt
>> @@ -6592,6 +6592,14 @@
>> <deci-seconds>: poll all this frequency
>> 0: no polling (default)
>>
>> + thp_anon= [KNL]
>> + Format: <size>[KMG]:always|madvise|never|inherit
>> + Can be used to control the default behavior of the
>> + system with respect to anonymous transparent hugepages.
>> + Can be used multiple times for multiple anon THP sizes.
>> + See Documentation/admin-guide/mm/transhuge.rst for more
>> + details.
>> +
>> threadirqs [KNL,EARLY]
>> Force threading of all interrupt handlers except those
>> marked explicitly IRQF_NO_THREAD.
>> diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
>> index 1aaf8e3a0b5a..f53d43d986e2 100644
>> --- a/Documentation/admin-guide/mm/transhuge.rst
>> +++ b/Documentation/admin-guide/mm/transhuge.rst
>> @@ -311,13 +311,27 @@ performance.
>> Note that any changes to the allowed set of sizes only applies to future
>> file-backed THP allocations.
>>
>> -Boot parameter
>> -==============
>> +Boot parameters
>> +===============
>>
>> -You can change the sysfs boot time defaults of Transparent Hugepage
>> -Support by passing the parameter ``transparent_hugepage=always`` or
>> -``transparent_hugepage=madvise`` or ``transparent_hugepage=never``
>> -to the kernel command line.
>> +You can change the sysfs boot time default for the top-level "enabled"
>> +control by passing the parameter ``transparent_hugepage=always`` or
>> +``transparent_hugepage=madvise`` or ``transparent_hugepage=never`` to the
>> +kernel command line.
>> +
>> +Alternatively, each supported anonymous THP size can be controlled by
>> +passing ``thp_anon=<size>[KMG]:<state>``, where ``<size>`` is the THP size
>> +and ``<state>`` is one of ``always``, ``madvise``, ``never`` or
>> +``inherit``.
>> +
>> +For example, the following will set 64K THP to ``always``::
>> +
>> + thp_anon=64K:always
>> +
>> +``thp_anon=`` may be specified multiple times to configure all THP sizes as
>> +required. If ``thp_anon=`` is specified at least once, any anon THP sizes
>> +not explicitly configured on the command line are implicitly set to
>> +``never``.
>>
>> Hugepages in tmpfs/shmem
>> ========================
>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>> index 4249c0bc9388..794d2790d90d 100644
>> --- a/mm/huge_memory.c
>> +++ b/mm/huge_memory.c
>> @@ -82,6 +82,7 @@ unsigned long huge_anon_orders_madvise __read_mostly;
>> unsigned long huge_anon_orders_inherit __read_mostly;
>> unsigned long huge_file_orders_always __read_mostly;
>> int huge_file_exec_order __read_mostly = -1;
>> +static bool anon_orders_configured;
>>
>> unsigned long __thp_vma_allowable_orders(struct vm_area_struct *vma,
>> unsigned long vm_flags,
>> @@ -763,7 +764,10 @@ static int __init hugepage_init_sysfs(struct kobject **hugepage_kobj)
>> * disable all other sizes. powerpc's PMD_ORDER isn't a compile-time
>> * constant so we have to do this here.
>> */
>> - huge_anon_orders_inherit = BIT(PMD_ORDER);
>> + if (!anon_orders_configured) {
>> + huge_anon_orders_inherit = BIT(PMD_ORDER);
>> + anon_orders_configured = true;
>> + }
>>
>> /*
>> * For pagecache, default to enabling all orders. powerpc's PMD_ORDER
>> @@ -955,6 +959,55 @@ static int __init setup_transparent_hugepage(char *str)
>> }
>> __setup("transparent_hugepage=", setup_transparent_hugepage);
>>
>> +static int __init setup_thp_anon(char *str)
>> +{
>> + unsigned long size;
>> + char *state;
>> + int order;
>> + int ret = 0;
>> +
>> + if (!str)
>> + goto out;
>> +
>> + size = (unsigned long)memparse(str, &state);
>> + order = ilog2(size >> PAGE_SHIFT);
>> + if (*state != ':' || !is_power_of_2(size) || size <= PAGE_SIZE ||
>> + !(BIT(order) & THP_ORDERS_ALL_ANON))
>> + goto out;
>> +
>> + state++;
>> +
>> + if (!strcmp(state, "always")) {
>> + clear_bit(order, &huge_anon_orders_inherit);
>> + clear_bit(order, &huge_anon_orders_madvise);
>> + set_bit(order, &huge_anon_orders_always);
>> + ret = 1;
>> + } else if (!strcmp(state, "inherit")) {
>> + clear_bit(order, &huge_anon_orders_always);
>> + clear_bit(order, &huge_anon_orders_madvise);
>> + set_bit(order, &huge_anon_orders_inherit);
>> + ret = 1;
>> + } else if (!strcmp(state, "madvise")) {
>> + clear_bit(order, &huge_anon_orders_always);
>> + clear_bit(order, &huge_anon_orders_inherit);
>> + set_bit(order, &huge_anon_orders_madvise);
>> + ret = 1;
>> + } else if (!strcmp(state, "never")) {
>> + clear_bit(order, &huge_anon_orders_always);
>> + clear_bit(order, &huge_anon_orders_inherit);
>> + clear_bit(order, &huge_anon_orders_madvise);
>> + ret = 1;
>> + }
>> +
>> + if (ret)
>> + anon_orders_configured = true;
>> +out:
>> + if (!ret)
>> + pr_warn("thp_anon=%s: cannot parse, ignored\n", str);
>> + return ret;
>> +}
>> +__setup("thp_anon=", setup_thp_anon);
>> +
>> pmd_t maybe_pmd_mkwrite(pmd_t pmd, struct vm_area_struct *vma)
>> {
>> if (likely(vma->vm_flags & VM_WRITE))
>> --
>> 2.43.0
>>
>
> Thanks
> Barry
Powered by blists - more mailing lists