lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240719124032.26852-1-shreeya.patel@collabora.com>
Date: Fri, 19 Jul 2024 18:10:28 +0530
From: Shreeya Patel <shreeya.patel@...labora.com>
To: heiko@...ech.de,
	mchehab@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	mturquette@...libre.com,
	sboyd@...nel.org,
	p.zabel@...gutronix.de,
	jose.abreu@...opsys.com,
	nelson.costa@...opsys.com,
	shawn.wen@...k-chips.com,
	nicolas.dufresne@...labora.com,
	hverkuil@...all.nl,
	hverkuil-cisco@...all.nl
Cc: kernel@...labora.com,
	linux-kernel@...r.kernel.org,
	linux-media@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org,
	Shreeya Patel <shreeya.patel@...labora.com>
Subject: [PATCH v4 0/4] Add Synopsys DesignWare HDMI RX Controller

This series implements support for the Synopsys DesignWare
HDMI RX Controller, being compliant with standard HDMI 1.4b
and HDMI 2.0.

Features that are currently supported by the HDMI RX driver
have been tested on rock5b board using a HDMI to micro-HDMI cable.
It is recommended to use a good quality cable as there were
multiple issues seen during testing the driver.

Please note the below information :-
* While testing the driver on rock5b we noticed that the binary BL31
from Rockchip contains some unknown code to get the HDMI-RX PHY
access working without any errors.
With TF-A BL31, the HDMI-RX PHY also works fine but there were no
interrupts seen for rk_hdmirx-hdmi leading to some errors when
loading the driver [0]. It doesn't affect the functionality of the
driver though.
* We have tested the working of OBS studio with HDMIRX driver and
there were no issues seen.
* We also tested and verified the support for interlaced video.

[0] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/trusted-firmware-a/-/issues/1

To test the HDMI RX Controller driver, following example commands can be used :-

root@...ian-rockchip-rock5b-rk3588:~# v4l2-ctl --verbose -d /dev/video0 \
--set-fmt-video=width=1920,height=1080,pixelformat='BGR3' --stream-mmap=4 \
--stream-skip=3 --stream-count=100 --stream-to=/home/hdmiin4k.raw --stream-poll

root@...ian-rockchip-rock5b-rk3588:~# ffmpeg -f rawvideo -vcodec rawvideo \
-s 1920x1080 -r 60 -pix_fmt bgr24 -i /home/hdmiin4k.raw output.mkv

CEC compliance test results :-

* https://gitlab.collabora.com/-/snippets/381
* https://gitlab.collabora.com/-/snippets/380

Following is the v4l2-compliance test result :-

root@...ian-rockchip-rock5b-rk3588:~# v4l2-compliance -d /dev/video0
v4l2-compliance 1.27.0-5220, 64 bits, 64-bit time_t
v4l2-compliance SHA: 8387e3673837 2024-07-01 11:09:32

Compliance test for snps_hdmirx device /dev/video0:

Driver Info:
	Driver name      : snps_hdmirx
	Card type        : snps_hdmirx
	Bus info         : platform:fdee0000.hdmi-receiver
	Driver version   : 6.10.0
	Capabilities     : 0x84201000
		Video Capture Multiplanar
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x04201000
		Video Capture Multiplanar
		Streaming
		Extended Pix Format

Required ioctls:
	test VIDIOC_QUERYCAP: OK
	test invalid ioctls: OK

Allow for multiple opens:
	test second /dev/video0 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
	test VIDIOC_LOG_STATUS: OK

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 1 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
	test VIDIOC_DV_TIMINGS_CAP: OK
	test VIDIOC_G/S_EDID: OK

Control ioctls (Input 0):
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 3 Private Controls: 0

Format ioctls (Input 0):
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK (Not Supported)

Codec ioctls (Input 0):
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls (Input 0):
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test CREATE_BUFS maximum buffers: OK
	test VIDIOC_REMOVE_BUFS: OK
	test VIDIOC_EXPBUF: OK
	test Requests: OK (Not Supported)

Total for snps_hdmirx device /dev/video0: 47, Succeeded: 47, Failed: 0, Warnings: 0

Changes in v4 :-
  - Remove DTS changes included in the device tree patch
  - Remove the hdmi rx pin info as it's already present
    in the rk3588-base-pinctrl.dtsi
  - Create a separate config option for selecting the EDID
    and enable it by default
  - Improve the comment related to DV timings and move it
    to the side of hdmirx_get_detected_timings
  - Add 100ms delay before pulling the HPD high
  - Do not return the detected timings from VIDIOC_G_DV_TIMINGS
  - Drop the bus info from hdmirx_querycap
  - If *num_planes != 0 then return 0 in hdmirx_queue_setup
  - Set queue->min_queued_buffers to 1
  - Drop q->allow_cache_hints = 0; as it's always 0 by default
  - Add a comment for q->dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
  - Drop .read = vb2_fop_read as it's not supported by driver
  - Remove redundant edid_init_data_600M
  - Make HPD low when driver is loaded
  - Add support for reading AVI Infoframe
  - Remove msg_len checks from hdmirx_cec_transmit
  - Add info about the CEC compliance test in the cover letter
  - Add arbitration lost status
  - Validate the physical address inside the EDID

Changes in v3 :-
  - Use v4l2-common helpers in the HDMIRX driver
  - Rename cma node and phandle names
  - Elaborate the comment to explain 160MiB calculation
  - Move &hdmi_receiver_cma to the rock5b dts file
  - Add information about interlaced video testing in the
    cover-letter

Changes in v2 :-
  - Fix checkpatch --strict warnings
  - Move the dt-binding include file changes in a separate patch
  - Add a description for the hardware in the dt-bindings file
  - Rename resets, vo1 grf and HPD properties
  - Add a proper description for grf and vo1-grf phandles in the
    bindings
  - Rename the HDMI RX node name to hdmi-receiver
  - Include gpio header file in binding example to fix the
    dt_binding_check failure
  - Move hdmirx_cma node to the rk3588.dtsi file
  - Add an entry to MAINTAINERS file for the HDMIRX driver

Shreeya Patel (4):
  MAINTAINERS: Add entry for Synopsys DesignWare HDMI RX Driver
  dt-bindings: media: Document bindings for HDMI RX Controller
  arm64: dts: rockchip: Add device tree support for HDMI RX Controller
  media: platform: synopsys: Add support for hdmi input driver

 .../bindings/media/snps,dw-hdmi-rx.yaml       |  132 +
 MAINTAINERS                                   |    8 +
 .../dts/rockchip/rk3588-base-pinctrl.dtsi     |   14 +
 .../arm64/boot/dts/rockchip/rk3588-extra.dtsi |   56 +
 drivers/media/platform/Kconfig                |    1 +
 drivers/media/platform/Makefile               |    1 +
 drivers/media/platform/synopsys/Kconfig       |    3 +
 drivers/media/platform/synopsys/Makefile      |    2 +
 .../media/platform/synopsys/hdmirx/Kconfig    |   27 +
 .../media/platform/synopsys/hdmirx/Makefile   |    4 +
 .../platform/synopsys/hdmirx/snps_hdmirx.c    | 2763 +++++++++++++++++
 .../platform/synopsys/hdmirx/snps_hdmirx.h    |  394 +++
 .../synopsys/hdmirx/snps_hdmirx_cec.c         |  285 ++
 .../synopsys/hdmirx/snps_hdmirx_cec.h         |   44 +
 14 files changed, 3734 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
 create mode 100644 drivers/media/platform/synopsys/Kconfig
 create mode 100644 drivers/media/platform/synopsys/Makefile
 create mode 100644 drivers/media/platform/synopsys/hdmirx/Kconfig
 create mode 100644 drivers/media/platform/synopsys/hdmirx/Makefile
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c
 create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h

-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ