| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<VI1PR04MB5005A8C7EFBFE2D1D5BB2605E8AD2@VI1PR04MB5005.eurprd04.prod.outlook.com>
Date: Fri, 19 Jul 2024 02:01:35 +0000
From: Carlos Song <carlos.song@....com>
To: Frank Li <frank.li@....com>
CC: "miquel.raynal@...tlin.com" <miquel.raynal@...tlin.com>,
"conor.culhane@...vaco.com" <conor.culhane@...vaco.com>,
"alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>,
"linux-i3c@...ts.infradead.org" <linux-i3c@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, dl-linux-imx
<linux-imx@....com>
Subject: RE: [PATCH v2] i3c: master: svc: adjust SDR according to i3c spec
> -----Original Message-----
> From: Frank Li <frank.li@....com>
> Sent: Thursday, July 18, 2024 9:59 PM
> To: Carlos Song <carlos.song@....com>
> Cc: miquel.raynal@...tlin.com; conor.culhane@...vaco.com;
> alexandre.belloni@...tlin.com; linux-i3c@...ts.infradead.org;
> linux-kernel@...r.kernel.org; dl-linux-imx <linux-imx@....com>
> Subject: Re: [PATCH v2] i3c: master: svc: adjust SDR according to i3c spec
>
> Please add imx@...ts.linux.dev next time.
>
Thank you! I will add it at V3.
> On Thu, Jul 18, 2024 at 05:13:28PM +0800, carlos.song@....com wrote:
> > From: Carlos Song <carlos.song@....com>
> >
> > According to I3C Specification(Version 1.1) 5.1.2.4 "Use of Clock
> > Speed to Prevent Legacy I2C Devices From Seeing I3C traffic", when
> > slow i2c devices(FM/FM+ rate i2c frequency without 50ns filter) works
> > on i3c bus, i3c SDR should work at FM/FM+ rate.
> >
> > Adjust timing for difference mode.
> >
> > Signed-off-by: Clark Wang <xiaoning.wang@....com>
> > Signed-off-by: Carlos Song <carlos.song@....com>
> > Reviewed-by: Frank Li <frank.li@....com>
>
> V1 have my signed of, please keep it.
>
So sorry for this! I will send V3 and keep it.
> > ---
> > Change for V2:
> > - Correct I3C clk configuration and simplify the code:
> > Pure I3C mode and MIXED-FAST I3C mode just use the same i3c clk
> configuration:
> > 1. i3c push-pull timing is 40ns high and 40ns low at 12.5Mhz
> > 2. i3c open-darin timing is 40ns high and 200ns low at ~4Mhz
> > 3. i2cbaud should be different between Pure I3C mode and MIXED-FAST
> > I3C mode.
>
> V1 get Acked-by: Miquel Raynal <miquel.raynal@...tlin.com> If you drop it
> because big change, you should mention at change log, said not apply Miquel's
> ACK tag, because below change is quite big.
>
Do some code change and fix a bug, there is no big change. I will add back it at V3.
> > ---
> > drivers/i3c/master/svc-i3c-master.c | 31
> > ++++++++++++++++++++---------
> > 1 file changed, 22 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/i3c/master/svc-i3c-master.c
> > b/drivers/i3c/master/svc-i3c-master.c
> > index e80c002991f7..78116530f431 100644
> > --- a/drivers/i3c/master/svc-i3c-master.c
> > +++ b/drivers/i3c/master/svc-i3c-master.c
> > @@ -127,6 +127,8 @@
> >
> > /* This parameter depends on the implementation and may be tuned */
> > #define SVC_I3C_FIFO_SIZE 16
> > +#define SVC_I3C_PPBAUD_MAX 15
> > +#define SVC_I3C_QUICK_I2C_CLK 4170000
> >
> > #define SVC_I3C_EVENT_IBI BIT(0)
> > #define SVC_I3C_EVENT_HOTJOIN BIT(1)
> > @@ -535,6 +537,7 @@ static int svc_i3c_master_bus_init(struct
> i3c_master_controller *m)
> > struct i3c_bus *bus = i3c_master_get_bus(m);
> > struct i3c_device_info info = {};
> > unsigned long fclk_rate, fclk_period_ns;
> > + unsigned long i2c_period_ns, i2c_scl_rate, i3c_scl_rate;
> > unsigned int high_period_ns, od_low_period_ns;
> > u32 ppbaud, pplow, odhpp, odbaud, odstop, i2cbaud, reg;
> > int ret;
> > @@ -555,12 +558,15 @@ static int svc_i3c_master_bus_init(struct
> i3c_master_controller *m)
> > }
> >
> > fclk_period_ns = DIV_ROUND_UP(1000000000, fclk_rate);
> > + i2c_period_ns = DIV_ROUND_UP(1000000000, bus->scl_rate.i2c);
> > + i2c_scl_rate = bus->scl_rate.i2c;
> > + i3c_scl_rate = bus->scl_rate.i3c;
> >
> > /*
> > * Using I3C Push-Pull mode, target is 12.5MHz/80ns period.
> > * Simplest configuration is using a 50% duty-cycle of 40ns.
> > */
> > - ppbaud = DIV_ROUND_UP(40, fclk_period_ns) - 1;
> > + ppbaud = DIV_ROUND_UP(fclk_rate / 2, i3c_scl_rate) - 1;
> > pplow = 0;
> >
> > /*
> > @@ -570,7 +576,7 @@ static int svc_i3c_master_bus_init(struct
> i3c_master_controller *m)
> > */
> > odhpp = 1;
> > high_period_ns = (ppbaud + 1) * fclk_period_ns;
> > - odbaud = DIV_ROUND_UP(240 - high_period_ns, high_period_ns) - 1;
> > + odbaud = DIV_ROUND_UP(fclk_rate, SVC_I3C_QUICK_I2C_CLK * (1 +
> > +ppbaud)) - 2;
> > od_low_period_ns = (odbaud + 1) * high_period_ns;
> >
> > switch (bus->mode) {
> > @@ -579,20 +585,27 @@ static int svc_i3c_master_bus_init(struct
> i3c_master_controller *m)
> > odstop = 0;
> > break;
> > case I3C_BUS_MODE_MIXED_FAST:
> > - case I3C_BUS_MODE_MIXED_LIMITED:
> > /*
> > * Using I2C Fm+ mode, target is 1MHz/1000ns, the difference
> > * between the high and low period does not really matter.
> > */
> > - i2cbaud = DIV_ROUND_UP(1000, od_low_period_ns) - 2;
> > + i2cbaud = DIV_ROUND_UP(i2c_period_ns, od_low_period_ns) - 2;
> > odstop = 1;
> > break;
> > + case I3C_BUS_MODE_MIXED_LIMITED:
> > case I3C_BUS_MODE_MIXED_SLOW:
> > - /*
> > - * Using I2C Fm mode, target is 0.4MHz/2500ns, with the same
> > - * constraints as the FM+ mode.
> > - */
> > - i2cbaud = DIV_ROUND_UP(2500, od_low_period_ns) - 2;
> > + /* I3C PP + I3C OP + I2C OP both use i2c clk rate */
> > + if (ppbaud > SVC_I3C_PPBAUD_MAX) {
> > + ppbaud = SVC_I3C_PPBAUD_MAX;
> > + pplow = DIV_ROUND_UP(fclk_rate, i3c_scl_rate) - (2 + 2 *
> ppbaud);
> > + }
> > +
> > + high_period_ns = (ppbaud + 1) * fclk_period_ns;
> > + odhpp = 0;
> > + odbaud = DIV_ROUND_UP(fclk_rate, i2c_scl_rate * (2 + 2 * ppbaud)) -
> > +1;
> > +
> > + od_low_period_ns = (odbaud + 1) * high_period_ns;
> > + i2cbaud = DIV_ROUND_UP(i2c_period_ns, od_low_period_ns) - 2;
> > odstop = 1;
> > break;
> > default:
> > --
> > 2.34.1
> >
Powered by blists - more mailing lists