lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <123bda9c6421ffe718c7497f1040d102@manjaro.org>
Date: Sat, 20 Jul 2024 12:21:37 +0200
From: Dragan Simic <dsimic@...jaro.org>
To: Andy Yan <andyshrk@....com>
Cc: heiko@...ech.de, krzk+dt@...nel.org, robh@...nel.org,
 devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
 linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org
Subject: Re: [PATCH 2/2] arm64: dts: rockchip: Add support for rk3588 GenBook

Hello Andy,

I forgot to note something in my previous response, so please
see an additional note below.

On 2024-07-16 15:50, Dragan Simic wrote:
> On 2024-07-16 12:07, Andy Yan wrote:
>> 在 2024-07-15 22:47:04,"Dragan Simic" <dsimic@...jaro.org> 写道:
>>> On 2024-07-15 12:44, Andy Yan wrote:
>>>> At 2024-07-14 23:27:54, "Dragan Simic" <dsimic@...jaro.org> wrote:
>>>>> Please see a few comments below.
>>>>> 
>>>>> On 2024-07-14 13:28, Andy Yan wrote:
>>>>>> Cool Pi GenBook works as a mother board connect with CM5 [0].
>>>>> 
>>>>> s/mother board/carrier board/
>>>> 
>>>> This can be changed to carrier board in next version。
>>>> 
>>>>> s/CM5/GenM5/
>>>> 
>>>> In fact, the SOM  is called  CM5 always[0], even this laptop was
>>>> called cm5 laptop from the
>>>> very beginning of the design。
>>>> They just gave it a new name GenBook when it comes to crowdsupply.
>>>> 
>>>> The dtsi for CM5 is aready landing upstream,I inclulde it in the
>>>> current genbook dts。
>>>> 
>>>> [0]https://forum.cool-pi.com/topic/98/cool-pi-5-compute-module-minipc-carrier-board-spec
>>> 
>>> Ah, that's quite interesting, it was probably renamed for marketing
>>> purposes.  Thanks for the clarification.
>>> 
>>> To add to the confusion, none of "GenBook", "CM5" or "GenM5" appear
>>> on the labels found on the actual PCBs. [1]  Instead, there are only
>>> some rather generic terms.
>> 
>> So we can keep the name as it is now ?
> 
> As far as I'm concerned, yes.  Everything points to "CoolPi CM5"
> and "CoolPi GenBook" being the rigth names in the upstream kernel
> for the SoM and the carrier board, respectively.
> 
> However, please see another comment below.
> 
>>> [1] 
>>> https://www.crowdsupply.com/img/6185/60c35852-7a58-4b6f-80fc-af3a0e3d6185/genbook-rk3588-main-board-close-up_jpg_gallery-lg.jpg
>>> 
>>>>>> Specification:
>>>>>> - Rockchip RK3588
>>>>>> - LPDDR5X 8/32 GB
>>>>>> - eMMC 64 GB
>>>>>> - HDMI Type A out x 1
>>>>>> - USB 3.0 Host x 1
>>>>>> - USB-C 3.0 with DisplayPort AltMode
>>>>>> - PCIE M.2 E Key for RTL8852BE Wireless connection
>>>>>> - PCIE M.2 M Key for NVME connection
>>>>>> - eDP panel with 1920x1080
>>>>>> 
>>>>>> This patch add basic support to bringup eMMC/USB HOST/WiFi
>>>>>> and can also drive a HDMI output with out of tree hdmi patches.
>>>>>> 
>>>>>> [0]
>>>>>> https://www.crowdsupply.com/shenzhen-tianmao-technology-co-ltd/genbook-rk3588
>>>>>> 
>>>>>> Signed-off-by: Andy Yan <andyshrk@....com>
>>>>>> ---
>>>>>> 
>>>>>>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>>>>>>  .../dts/rockchip/rk3588-coolpi-genbook.dts    | 296
>>>>>> ++++++++++++++++++
>>>>>>  2 files changed, 297 insertions(+)
>>>>>>  create mode 100644
>>>>>> arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
>>>>> 
>>>>> It would be better to split this into two files: a dtsi for the 
>>>>> GenM5
>>>>> system
>>>>> on module, and a dts for the GenBook carrier board.  That way, the
>>>>> dts(i) files
>>>>> would describe the actual hardware better.
>>>>> 
>>>>>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile
>>>>>> b/arch/arm64/boot/dts/rockchip/Makefile
>>>>>> index 8fa469db400c..0fad54939bbd 100644
>>>>>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>>>>>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>>>>>> @@ -122,6 +122,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) +=
>>>>>> rk3568-wolfvision-pf5-display-vz.dtbo
>>>>>>  dtb-$(CONFIG_ARCH_ROCKCHIP) +=
>>>>>> rk3568-wolfvision-pf5-io-expander.dtbo
>>>>>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
>>>>>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
>>>>>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-genbook.dtb
>>>>>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
>>>>>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
>>>>>>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
>>>>>> diff --git 
>>>>>> a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
>>>>>> b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts

The new device dts file should be named rk3588-coolpi-cm5-genbook.dts
instead of rk3588-coolpi-genbook.dts, because that would:

   (a) follow the "dependency graph" naming scheme, and
   (b) make the naming scheme future-proof for some other SoM that
       could possibly be made available for the GenBook in the
       future, for which the new device dts file would be named
       rk3588-coolpi-XYZ-genbook.dts.

>>>>>> new file mode 100644
>>>>>> index 000000000000..28357c6f05fb
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
>>>>>> @@ -0,0 +1,296 @@
>>>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>>>>> +/*
>>>>>> + * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
>>>>>> + *
>>>>>> + */
>>>>>> +
>>>>>> +/dts-v1/;
>>>>>> +
>>>>>> +#include <dt-bindings/leds/common.h>
>>>>>> +#include "rk3588-coolpi-cm5.dtsi"
>>>>>> +
>>>>>> +/ {
>>>>>> +	model = "RK3588 CoolPi GenBook";
> 
> It would be better to omit "RK3588" from the model name and use
> "CM5" instead, because that more precisely reflects the "dependency
> graph", so to speak.  Thus, I'd suggest that "CoolPi CM5 GenBook"
> is used as the model name.
> 
> Technically, "CoolPi CM5 on GenBook carrier board" would be a more
> correct model name, so that's another option, but the above-proposed
> "CoolPi CM5 GenBook" sounds more like a finished product/device
> than just some carrier board with an SoM.
> 
>>>>>> +	compatible = "coolpi,genbook", "coolpi,pi-cm5", 
>>>>>> "rockchip,rk3588";
>>>>>> +
>>>>>> +	backlight: backlight {
>>>>>> +		compatible = "pwm-backlight";
>>>>>> +		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
>>>>>> +		pinctrl-names = "default";
>>>>>> +		pinctrl-0 = <&bl_en>;
>>>>>> +		power-supply = <&vcc12v_dcin>;
>>>>>> +		pwms = <&pwm6 0 25000 0>;
>>>>>> +	};
>>>>>> +
>>>>>> +	leds: leds {
>>>>>> +		compatible = "gpio-leds";
>>>>>> +
>>>>>> +		heartbeat_led: led-0 {
>>>>>> +			color = <LED_COLOR_ID_GREEN>;
>>>>>> +			function = LED_FUNCTION_STATUS;
>>>>>> +			gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
>>>>>> +			linux,default-trigger = "heartbeat";
>>>>>> +		};
>>>>>> +
>>>>>> +		wlan_led: led-1 {
>>>>>> +			color = <LED_COLOR_ID_GREEN>;
>>>>>> +			function = LED_FUNCTION_WLAN;
>>>>>> +			gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
>>>>>> +		};
>>>>>> +
>>>>>> +		charging_red: led-2 {
>>>>>> +			function = LED_FUNCTION_CHARGING;
>>>>>> +			color = <LED_COLOR_ID_RED>;
>>>>>> +			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	vcc12v_dcin: vcc12v-dcin-regulator {
>>>>>> +		compatible = "regulator-fixed";
>>>>>> +		regulator-name = "vcc12v_dcin";
>>>>>> +		regulator-always-on;
>>>>>> +		regulator-boot-on;
>>>>>> +		regulator-min-microvolt = <12000000>;
>>>>>> +		regulator-max-microvolt = <12000000>;
>>>>>> +	};
>>>>>> +
>>>>>> +	vcc_sys: vcc-sys-regulator {
>>>>>> +		compatible = "regulator-fixed";
>>>>>> +		regulator-name = "vcc_sys";
>>>>>> +		regulator-always-on;
>>>>>> +		regulator-boot-on;
>>>>>> +		regulator-min-microvolt = <7000000>;
>>>>>> +		regulator-max-microvolt = <7000000>;
>>>>>> +		vin-supply = <&vcc12v_dcin>;
>>>>>> +	};
>>>>>> +
>>>>>> +	vcc5v0_sys: vcc5v0-sys-regulator {
>>>>>> +		compatible = "regulator-fixed";
>>>>>> +		regulator-name = "vcc5v0_sys";
>>>>>> +		regulator-always-on;
>>>>>> +		regulator-boot-on;
>>>>>> +		regulator-min-microvolt = <7000000>;
>>>>>> +		regulator-max-microvolt = <7000000>;
>>>>>> +		vin-supply = <&vcc_sys>;
>>>>>> +	};
>>>>>> +
>>>>>> +	vcc3v3_sys: vcc3v3-sys-regulator {
>>>>>> +		compatible = "regulator-fixed";
>>>>>> +		regulator-name = "vcc3v3_sys";
>>>>>> +		regulator-always-on;
>>>>>> +		regulator-boot-on;
>>>>>> +		regulator-min-microvolt = <3300000>;
>>>>>> +		regulator-max-microvolt = <3300000>;
>>>>>> +		vin-supply = <&vcc5v0_sys>;
>>>>>> +	};
>>>>>> +
>>>>>> +	vcc3v3_lcd: vcc3v3-lcd-regulator {
>>>>>> +		compatible = "regulator-fixed";
>>>>>> +		regulator-name = "vcc3v3_lcd";
>>>>>> +		enable-active-high;
>>>>>> +		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
>>>>>> +		pinctrl-names = "default";
>>>>>> +		pinctrl-0 = <&lcdpwr_en>;
>>>>>> +		vin-supply = <&vcc3v3_sys>;
>>>>>> +	};
>>>>>> +
>>>>>> +	vcc5v0_usb: vcc5v0-usb-regulator {
>>>>>> +		compatible = "regulator-fixed";
>>>>>> +		regulator-name = "vcc5v0_usb";
>>>>>> +		regulator-boot-on;
>>>>>> +		regulator-always-on;
>>>>>> +		enable-active-high;
>>>>>> +		regulator-min-microvolt = <5000000>;
>>>>>> +		regulator-max-microvolt = <5000000>;
>>>>>> +		gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
>>>>>> +		pinctrl-names = "default";
>>>>>> +		pinctrl-0 = <&usb_pwren>;
>>>>>> +		vin-supply = <&vcc_sys>;
>>>>>> +	};
>>>>>> +
>>>>>> +	vcc5v0_usb_host0: vcc5v0_usb30_host: vcc5v0-usb-host-regulator {
>>>>>> +		compatible = "regulator-fixed";
>>>>>> +		regulator-name = "vcc5v0_host";
>>>>>> +		regulator-boot-on;
>>>>>> +		regulator-always-on;
>>>>>> +		enable-active-high;
>>>>>> +		regulator-min-microvolt = <5000000>;
>>>>>> +		regulator-max-microvolt = <5000000>;
>>>>>> +		gpio = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
>>>>>> +		pinctrl-names = "default";
>>>>>> +		pinctrl-0 = <&usb_host_pwren>;
>>>>>> +		vin-supply = <&vcc5v0_usb>;
>>>>>> +	};
>>>>>> +};
>>>>>> +
>>>>>> +&gmac0 {
>>>>>> +	status = "disabled";
>>>>>> +};
>>>>>> +
>>>>>> +/* M.2 E-Key */
>>>>>> +&pcie2x1l0 {
>>>>>> +	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
>>>>>> +	vpcie3v3-supply = <&vcc3v3_sys>;
>>>>>> +	pinctrl-names = "default";
>>>>>> +	pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron
>>>>>> &bt_pwron>;
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&pcie2x1l2 {
>>>>>> +	status = "disabled";
>>>>>> +};
>>>>>> +
>>>>>> +&pcie30phy {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +/* M.2 M-Key ssd */
>>>>>> +&pcie3x4 {
>>>>>> +	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
>>>>>> +	vpcie3v3-supply = <&vcc3v3_sys>;
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&pinctrl {
>>>>>> +	lcd {
>>>>>> +		lcdpwr_en: lcdpwr-en {
>>>>>> +			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
>>>>>> +		};
>>>>>> +
>>>>>> +		bl_en: bl-en {
>>>>>> +			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	usb {
>>>>>> +		usb_pwren: usb-pwren {
>>>>>> +			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> +		};
>>>>>> +
>>>>>> +		usb_otg_pwren: usb-otg-pwren {
>>>>>> +			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> +		};
>>>>>> +
>>>>>> +		usb_host_pwren: usb-host-pwren {
>>>>>> +			rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	wifi {
>>>>>> +		bt_pwron: bt-pwron {
>>>>>> +			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> +		};
>>>>>> +
>>>>>> +		pcie_clkreq: pcie-clkreq {
>>>>>> +			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> +		};
>>>>>> +
>>>>>> +		pcie_rst: pcie-rst {
>>>>>> +			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> +		};
>>>>>> +
>>>>>> +		wifi_pwron: wifi-pwron {
>>>>>> +			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> +		};
>>>>>> +
>>>>>> +		pcie_wake: pcie-wake {
>>>>>> +			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +};
>>>>>> +
>>>>>> +&pwm6 {
>>>>>> +	pinctrl-0 = <&pwm6m1_pins>;
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&sdmmc {
>>>>>> +	status = "disabled";
>>>>>> +};
>>>>>> +
>>>>>> +&sfc {
>>>>>> +	pinctrl-names = "default";
>>>>>> +	pinctrl-0 = <&fspim2_pins>;
>>>>>> +	status = "okay";
>>>>>> +
>>>>>> +	flash@0 {
>>>>>> +		compatible = "jedec,spi-nor";
>>>>>> +		reg = <0x0>;
>>>>>> +		spi-max-frequency = <100000000>;
>>>>>> +		spi-rx-bus-width = <4>;
>>>>>> +		spi-tx-bus-width = <1>;
>>>>>> +	};
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy0 {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy0_otg {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&usbdp_phy0 {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy1 {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy1_otg {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy2 {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy3 {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy2_host {
>>>>>> +	phy-supply = <&vcc5v0_usb_host0>;
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy3_host {
>>>>>> +	phy-supply = <&vcc5v0_usb>;
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&usbdp_phy1 {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +/* For Keypad */
>>>>>> +&usb_host0_ehci {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&usb_host0_ohci {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +/* Type C port */
>>>>>> +&usb_host0_xhci {
>>>>>> +	dr_mode = "peripheral";
>>>>>> +	maximum-speed = "high-speed";
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +/* connected to a HUB for camera and BT */
>>>>>> +&usb_host1_ehci {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&usb_host1_ohci {
>>>>>> +	status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +/* USB A out */
>>>>>> +&usb_host1_xhci {
>>>>>> +	dr_mode = "host";
>>>>>> +	status = "okay";
>>>>>> +};

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ