linux-kernel - [PATCH 0/8] Expand available features on Qnap TS433

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240720210856.778014-1-heiko@sntech.de>
Date: Sat, 20 Jul 2024 23:08:46 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: heiko@...ech.de
Cc: ukleinek@...ian.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH 0/8] Expand available features on Qnap TS433

Thanks to the nicely supported rk3568, the hardest part for adding things,
is to pull things from the vendor-kernel and translating them to mainline
standards.

This series allows the TS433 to use all 4 bays [0], wiggle some LEDs and
access devices connected to all 3 usb ports.


[0] I only have two drives right now, but I tested both the internal
sata connector as well as the PCIe connected sata controller.


Heiko Stuebner (8):
  arm64: dts: rockchip: add PCIe supply regulator to Qnap TS433
  arm64: dts: rockchip: enable second PCIe controller on the Qnap ts433
  arm64: dts: rockchip: enable uart0 on qnap ts433
  arm64: dts: rockchip: enable usb ports on qnap ts433
  arm64: dts: rockchip: add stdout path on Qnap TS433
  arm64: dts: rockchip: enable sata1+2 on Qnap-TS433
  arm64: dts: rockchip: add board-aliases for Qnap-TS433
  arm64: dts: rockchip: add hdd leds to Qnap-TS433

 .../boot/dts/rockchip/rk3568-qnap-ts433.dts   | 224 +++++++++++++++++-
 1 file changed, 223 insertions(+), 1 deletion(-)

-- 
2.39.2