linux-kernel - [PATCH v2 04/14] arm64: dts: rockchip: enable usb ports on Qnap-TS433

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240721173723.919961-5-heiko@sntech.de>
Date: Sun, 21 Jul 2024 19:37:13 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: heiko@...ech.de
Cc: ukleinek@...ian.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v2 04/14] arm64: dts: rockchip: enable usb ports on Qnap-TS433

Enable usb controllers and phys and add regulator infrastructure for the
usb ports on the TS433.

Of course there are no schematics available for the device, so the
regulator information comes from the vendor-devicetree with unknown
accuracy.

Signed-off-by: Heiko Stuebner <heiko@...ech.de>
---
 .../boot/dts/rockchip/rk3568-qnap-ts433.dts   | 105 ++++++++++++++++++
 1 file changed, 105 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index f3ce3cc4598db..3fa1670e596cb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -31,6 +31,49 @@ vcc3v3_pcie: regulator-vcc3v3-pcie {
 		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&dc_12v>;
 	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_otg: regulator-vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_otg_en>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+};
+
+/* connected to usb_host0_xhci */
+&combphy0 {
+	status = "okay";
 };
 
 &gmac0 {
@@ -95,6 +138,18 @@ &pcie3x2 {
 	status = "okay";
 };
 
+&pinctrl {
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
 &sdhci {
 	bus-width = <8>;
 	max-frequency = <200000000>;
@@ -115,3 +170,53 @@ &uart0 {
 &uart2 {
 	status = "okay";
 };
+
+&usb2phy0 {
+	status = "okay";
+};
+
+/* connected to usb_host0_xhci */
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+/* connected to usb_host1_ehci/ohci */
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+/* connected to usb_host0_ehci/ohci */
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+/* right port backside */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* front port */
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* left port backside */
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
-- 
2.39.2