[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAJM55Z9W7SYDCSeZy_NEQJBryGX5v+R8-xNxOzftivbGxA1TSg@mail.gmail.com>
Date: Sun, 21 Jul 2024 18:47:52 -0400
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Thomas Bonnefille <thomas.bonnefille@...tlin.com>, Andi Shyti <andi.shyti@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Jisheng Zhang <jszhang@...nel.org>, Guo Ren <guoren@...nel.org>, Fu Wei <wefu@...hat.com>,
Drew Fustini <dfustini@...storrent.com>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>, Conor Dooley <conor@...nel.org>,
Jarkko Nikula <jarkko.nikula@...ux.intel.com>
Cc: Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
Paul Walmsley <paul.walmsley@...ive.com>, Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Miquèl Raynal <miquel.raynal@...tlin.com>,
linux-i2c@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org
Subject: Re: [PATCH v3 3/3] riscv: dts: thead: Enable I2C on the BeagleV-Ahead
Thomas Bonnefille wrote:
> This commit enables the I2C0 controller of the TH1520, together with
> the FT24C32A EEPROM that is connected to it.
> In addition, this commit also enables the I2C controllers I2C2, I2C4
> and I2C5 as they are all three exposed on headers (P9 19 and 20 for I2C2,
> P9 17 and 18 for I2C5 and MikroBus 7 and 5 for I2C4).
> It also defined the required pinctrl nodes.
>
> Signed-off-by: Thomas Bonnefille <thomas.bonnefille@...tlin.com>
> ---
> arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 84 ++++++++++++++++++++++
> 1 file changed, 84 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> index 57a2578123eb..b5c4f1811955 100644
> --- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> +++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> @@ -122,6 +122,19 @@ led-pins {
> };
>
> &padctrl0_apsys {
> + i2c2_pins: i2c2-0 {
> + i2c-pins {
> + pins = "I2C2_SDA",
> + "I2C2_SCL";
> + function = "i2c";
> + bias-pull-up = <48000>;
nit: This and below can just be written
bias-pull-up;
> + drive-strength = <7>;
> + input-enable;
> + input-schmitt-enable;
> + slew-rate = <0>;
> + };
> + };
> +
> uart0_pins: uart0-0 {
> tx-pins {
> pins = "UART0_TXD";
> @@ -145,8 +158,79 @@ rx-pins {
> };
> };
>
> +&padctrl1_apsys {
> + i2c0_pins: i2c0-0 {
> + i2c-pins {
> + pins = "I2C0_SDA",
> + "I2C0_SCL";
> + function = "i2c";
> + bias-pull-up = <48000>;
> + drive-strength = <7>;
> + input-enable;
> + input-schmitt-enable;
> + slew-rate = <0>;
> + };
> + };
> +
> + i2c4_pins: i2c4-0 {
> + i2c-pins {
> + pins = "GPIO0_19", /* I2C4_SDA */
> + "GPIO0_18"; /* I2C4_SCL */
> + function = "i2c";
> + bias-pull-up = <48000>;
> + drive-strength = <7>;
> + input-enable;
> + input-schmitt-enable;
> + slew-rate = <0>;
> + };
> + };
> +
> + i2c5_pins: i2c5-0 {
> + i2c-pins {
> + pins = "QSPI1_D0_MOSI", /* I2C5_SDA */
> + "QSPI1_CSN0"; /* I2C5_SCL */
> + function = "i2c";
> + bias-pull-up = <48000>;
> + drive-strength = <7>;
> + input-enable;
> + input-schmitt-enable;
> + slew-rate = <0>;
> + };
> + };
> +};
> +
> &uart0 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_pins>;
> status = "okay";
> };
> +
> +&i2c0 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c32";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pins>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c4_pins>;
> + status = "okay";
> +};
> +
> +&i2c5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c5_pins>;
> + status = "okay";
> +};
These nodes are still not sorted alphabetically.
>
> --
> 2.45.2
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Powered by blists - more mailing lists