[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240721075717.GD1908@thinkpad>
Date: Sun, 21 Jul 2024 13:27:17 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Frank Li <Frank.Li@....com>
Cc: Richard Zhu <hongxing.zhu@....com>,
Lucas Stach <l.stach@...gutronix.de>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, linux-pci@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, bpf@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v7 06/10] PCI: imx6: Improve comment for workaround
ERR010728
On Mon, Jul 08, 2024 at 01:08:10PM -0400, Frank Li wrote:
> Improve comment about workaround ERR010728 by using official errata
> document content(https://www.nxp.com/webapp/Download?colCode=IMX7DS_2N09P).
>
> Signed-off-by: Frank Li <Frank.Li@....com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
- Mani
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 23 ++++++++++++++++++++---
> 1 file changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 2c60858b74a09..2b95c41f8907e 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -714,9 +714,26 @@ static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
> return 0;
>
> /*
> - * Workaround for ERR010728, failure of PCI-e PLL VCO to
> - * oscillate, especially when cold. This turns off "Duty-cycle
> - * Corrector" and other mysterious undocumented things.
> + * Workaround for ERR010728 (IMX7DS_2N09P, Rev. 1.1, 4/2023):
> + *
> + * PCIe: PLL may fail to lock under corner conditions.
> + *
> + * Initial VCO oscillation may fail under corner conditions such as
> + * cold temperature which will cause the PCIe PLL fail to lock in the
> + * initialization phase.
> + *
> + * The Duty-cycle Corrector calibration must be disabled.
> + *
> + * 1. De-assert the G_RST signal by clearing
> + * SRC_PCIEPHY_RCR[PCIEPHY_G_RST].
> + * 2. De-assert DCC_FB_EN by writing data “0x29” to the register
> + * address 0x306d0014 (PCIE_PHY_CMN_REG4).
> + * 3. Assert RX_EQS, RX_EQ_SEL by writing data “0x48” to the register
> + * address 0x306d0090 (PCIE_PHY_CMN_REG24).
> + * 4. Assert ATT_MODE by writing data “0xbc” to the register
> + * address 0x306d0098 (PCIE_PHY_CMN_REG26).
> + * 5. De-assert the CMN_RST signal by clearing register bit
> + * SRC_PCIEPHY_RCR[PCIEPHY_BTN]
> */
>
> if (likely(imx_pcie->phy_base)) {
>
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists