[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240722205030.GA68733-robh@kernel.org>
Date: Mon, 22 Jul 2024 14:50:30 -0600
From: Rob Herring <robh@...nel.org>
To: ysionneau@...rayinc.com
Cc: linux-kernel@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Jonathan Borne <jborne@...rayinc.com>,
Julian Vetter <jvetter@...rayinc.com>,
Jules Maselbas <jmaselbas@...v.net>, devicetree@...r.kernel.org
Subject: Re: [RFC PATCH v3 07/37] dt-bindings: Add binding for
kalray,coolidge-ipi-ctrl
On Mon, Jul 22, 2024 at 11:41:18AM +0200, ysionneau@...rayinc.com wrote:
> From: Yann Sionneau <ysionneau@...rayinc.com>
>
> Add binding for Kalray Coolidge IPI controller.
>
> Co-developed-by: Jules Maselbas <jmaselbas@...v.net>
> Signed-off-by: Jules Maselbas <jmaselbas@...v.net>
> Signed-off-by: Yann Sionneau <ysionneau@...rayinc.com>
> ---
>
> Notes:
>
> V2 -> V3:
> - fixed bindings to adhere to dt-schema
> - moved to interrupt-controller directory, like the related driver
> ---
> .../kalray,coolidge-ipi-ctrl.yaml | 79 +++++++++++++++++++
> 1 file changed, 79 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-ipi-ctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-ipi-ctrl.yaml b/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-ipi-ctrl.yaml
> new file mode 100644
> index 0000000000000..91e3afe4f1ca5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-ipi-ctrl.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/kalray,coolidge-ipi-ctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Kalray Coolidge SoC Inter-Processor Interrupt Controller (IPI)
> +
> +maintainers:
> + - Jonathan Borne <jborne@...rayinc.com>
> + - Julian Vetter <jvetter@...rayinc.com>
> + - Yann Sionneau <ysionneau@...rayinc.com>
> +
> +description: |
> + The Inter-Processor Interrupt Controller (IPI) provides a fast synchronization
> + mechanism to the software. It exposes eight independent set of registers that
> + can be use to notify each processor in the cluster.
> + A set of registers contains two 32-bit registers:
> + - 17-bit interrupt control, one bit per core, raise an interrupt on write
> + - 17-bit mask, one per core, to enable interrupts
> +
> + Bit at offsets 0 to 15 selects cores in the cluster, respectively PE0 to PE15,
> + while bit at offset 16 is for the cluster Resource Manager (RM) core.
> +
> + The eight output interrupts are connected to each processor core interrupt
> + controller (intc).
It says there are 16 interrupt outputs below...
> +
> +properties:
> + compatible:
> + const: kalray,coolidge-ipi-ctrl
> +
> + reg:
> + maxItems: 1
> +
> + interrupts-extended:
> + maxItems: 16
> + description: |
> + Specifies the interrupt line the IPI controller will raise on the core INTC.
> +
> + interrupt-controller: true
> +
> + '#interrupt-cells':
> + const: 0
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts-extended
> + - interrupt-controller
> + - '#interrupt-cells'
> +
> +examples:
> + - |
> + ipi: inter-processor-interrupt@...000 {
> + compatible = "kalray,coolidge-ipi-ctrl";
> + reg = <0x00 0xad0000 0x00 0x1000>;
> + #interrupt-cells = <0>;
> + interrupt-controller;
> + interrupts-extended = <&core_intc0 24>,
> + <&core_intc1 24>,
> + <&core_intc2 24>,
> + <&core_intc3 24>,
> + <&core_intc4 24>,
> + <&core_intc5 24>,
> + <&core_intc6 24>,
> + <&core_intc7 24>,
> + <&core_intc8 24>,
> + <&core_intc9 24>,
> + <&core_intc10 24>,
> + <&core_intc11 24>,
> + <&core_intc12 24>,
> + <&core_intc13 24>,
> + <&core_intc14 24>,
> + <&core_intc15 24>;
> + };
> +
> +...
> --
> 2.45.2
>
>
>
>
>
Powered by blists - more mailing lists