[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cac3d7ba-2a62-479d-94c2-c6dc4d7a5ba2@linaro.org>
Date: Tue, 23 Jul 2024 01:22:49 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Bjorn Andersson <andersson@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>
Cc: Jeffrey Hugo <quic_jhugo@...cinc.com>, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/4] arm64: dts: qcom: msm8998-lenovo-miix-630: enable
touchscreen
On 22.07.2024 1:57 PM, Dmitry Baryshkov wrote:
> There is no point in keeping touchscreen disabled, enable corresponding
> i2c-hid device.
>
> 04F3:2608 Touchscreen as /devices/platform/soc@...179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input1
> 04F3:2608 as /devices/platform/soc@...179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input2
> 04F3:2608 as /devices/platform/soc@...179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input3
> 04F3:2608 Stylus as /devices/platform/soc@...179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input4
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> ---
> .../boot/dts/qcom/msm8998-lenovo-miix-630.dts | 28 ++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
> index a105143bee4a..118c55f5bcfd 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
> @@ -11,6 +11,24 @@ / {
> chassis-type = "convertible";
> };
>
> +&blsp1_i2c5 {
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + tsc1: hid@10 {
weird (and unused label)
very non-specific node name too
> + compatible = "hid-over-i2c";
> + reg = <0x10>;
> + hid-descr-addr = <0x1>;
> +
> + interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-0 = <&i2c5_hid_active>;
> + pinctrl-names = "default";
> +
> + wakeup-source;
double tap to wake? tap to wake?
> + };
> +};
> +
> &blsp1_i2c6 {
> status = "okay";
>
> @@ -35,3 +53,13 @@ &remoteproc_mss {
> &sdhc2 {
> cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
> };
> +
> +&tlmm {
> + i2c5_hid_active: i2c5-hid-active-state {
> + pins = "gpio125";
> + function = "gpio";
> +
> + bias-pull-up;
> + drive-strength = <2>;
Since there are no other pin definitions, you can do better and not
copy the old rotten style ;)
Konrad
Powered by blists - more mailing lists