linux-kernel - [PATCH 06/12] arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240722-qx1050-feature-expansion-v1-6-c4d486435b96@riseup.net>
Date: Mon, 22 Jul 2024 14:10:16 +0700
From: Dang Huynh <danct12@...eup.net>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht, 
 linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Dang Huynh <danct12@...eup.net>
Subject: [PATCH 06/12] arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU

Fxtec Pro1x uses the same display (BOE BF060Y8M-AJ0) as Pro1.

Signed-off-by: Dang Huynh <danct12@...eup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 60 +++++++++++++++++++++++--
 1 file changed, 56 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 42567545f56d..6148cc258164 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -89,13 +89,16 @@ ts_vddio_supply: ts-vddio-supply {
 	};
 };
 
-&dispcc {
-	/* HACK: disable until a panel driver is ready to retain simplefb */
-	status = "disabled";
+&gpi_dma0 {
+	status = "okay";
 };
 
-&gpi_dma0 {
+&gpu {
 	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn";
+	};
 };
 
 &i2c1 {
@@ -132,6 +135,42 @@ touchscreen@14 {
 	};
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm6125_l18a>;
+	status = "okay";
+
+	panel: panel@0 {
+		compatible = "boe,bf060y8m-aj0";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&pm6125_l9a>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mdss_dsi_n &panel_en_n>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
 &pm6125_gpios {
 	vol_up_n: vol-up-n-state {
 		pins = "gpio5";
@@ -340,6 +379,19 @@ key_camera_n: key-camera-n {
 		bias-pull-up;
 	};
 
+	mdss_dsi_n: mdss-dsi-n {
+		pins = "gpio82";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	panel_en_n: panel-en-n {
+		pins = "gpio65";
+		function = "gpio";
+		bias-disable;
+	};
+
 	ts_int_n: ts-int-n {
 		pins = "gpio80";
 		function = "gpio";

-- 
2.45.2