lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <df5f4dc7-a014-4060-9c5d-1c6c0fd5b7a7@linux.alibaba.com>
Date: Mon, 22 Jul 2024 16:04:34 +0800
From: Baolin Wang <baolin.wang@...ux.alibaba.com>
To: Ryan Roberts <ryan.roberts@....com>,
 Andrew Morton <akpm@...ux-foundation.org>, Hugh Dickins <hughd@...gle.com>,
 Jonathan Corbet <corbet@....net>,
 "Matthew Wilcox (Oracle)" <willy@...radead.org>,
 David Hildenbrand <david@...hat.com>, Barry Song <baohua@...nel.org>,
 Lance Yang <ioworker0@...il.com>, Gavin Shan <gshan@...hat.com>
Cc: linux-kernel@...r.kernel.org, linux-mm@...ck.org
Subject: Re: [PATCH v2 2/3] mm: Tidy up shmem mTHP controls and stats



On 2024/7/22 15:33, Ryan Roberts wrote:
> On 22/07/2024 07:14, Baolin Wang wrote:
>>
>>
>> On 2024/7/16 21:59, Ryan Roberts wrote:
>>> Previously we had a situation where shmem mTHP controls and stats were
>>> not exposed for some supported sizes and were exposed for some
>>> unsupported sizes. So let's clean that up.
>>>
>>> Anon mTHP can support all large orders (2, PMD_ORDER). But shmem can
>>> support all large orders (1, MAX_PAGECACHE_ORDER). However, per-size
>>> shmem controls and stats were previously being exposed for all the anon
>>> mTHP orders, meaning order-1 was not present, and for arm64 64K base
>>> pages, orders 12 and 13 were exposed but were not supported internally.
>>>
>>> Tidy this all up by defining ctrl and stats attribute groups for anon
>>> and file separately. Anon ctrl and stats groups are populated for all
>>> orders in THP_ORDERS_ALL_ANON and file ctrl and stats groups are
>>> populated for all orders in THP_ORDERS_ALL_FILE_DEFAULT.
>>
>> Make sense.
>>
>>>
>>> The side-effect of all this is that different hugepage-*kB directories
>>> contain different sets of controls and stats, depending on which memory
>>> types support that size. This approach is preferred over the
>>> alternative, which is to populate dummy controls and stats for memory
>>> types that do not support a given size.
>>
>> OK.
>>
>>>
>>> Signed-off-by: Ryan Roberts <ryan.roberts@....com>
>>> ---
>>>    mm/huge_memory.c | 110 ++++++++++++++++++++++++++++++++++-------------
>>>    1 file changed, 80 insertions(+), 30 deletions(-)
>>>
>>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>>> index f4be468e06a4..578ac212c172 100644
>>> --- a/mm/huge_memory.c
>>> +++ b/mm/huge_memory.c
>>> @@ -463,8 +463,8 @@ static void thpsize_release(struct kobject *kobj);
>>>    static DEFINE_SPINLOCK(huge_anon_orders_lock);
>>>    static LIST_HEAD(thpsize_list);
>>>    -static ssize_t thpsize_enabled_show(struct kobject *kobj,
>>> -                    struct kobj_attribute *attr, char *buf)
>>> +static ssize_t anon_enabled_show(struct kobject *kobj,
>>> +                 struct kobj_attribute *attr, char *buf)
>>>    {
>>>        int order = to_thpsize(kobj)->order;
>>>        const char *output;
>>> @@ -481,9 +481,9 @@ static ssize_t thpsize_enabled_show(struct kobject *kobj,
>>>        return sysfs_emit(buf, "%s\n", output);
>>>    }
>>>    -static ssize_t thpsize_enabled_store(struct kobject *kobj,
>>> -                     struct kobj_attribute *attr,
>>> -                     const char *buf, size_t count)
>>> +static ssize_t anon_enabled_store(struct kobject *kobj,
>>> +                  struct kobj_attribute *attr,
>>> +                  const char *buf, size_t count)
>>>    {
>>>        int order = to_thpsize(kobj)->order;
>>>        ssize_t ret = count;
>>> @@ -525,19 +525,27 @@ static ssize_t thpsize_enabled_store(struct kobject *kobj,
>>>        return ret;
>>>    }
>>>    -static struct kobj_attribute thpsize_enabled_attr =
>>> -    __ATTR(enabled, 0644, thpsize_enabled_show, thpsize_enabled_store);
>>> +static struct kobj_attribute anon_enabled_attr =
>>> +    __ATTR(enabled, 0644, anon_enabled_show, anon_enabled_store);
>>>    -static struct attribute *thpsize_attrs[] = {
>>> -    &thpsize_enabled_attr.attr,
>>> +static struct attribute *anon_ctrl_attrs[] = {
>>> +    &anon_enabled_attr.attr,
>>> +    NULL,
>>> +};
>>> +
>>> +static const struct attribute_group anon_ctrl_attr_grp = {
>>> +    .attrs = anon_ctrl_attrs,
>>> +};
>>> +
>>> +static struct attribute *file_ctrl_attrs[] = {
>>>    #ifdef CONFIG_SHMEM
>>>        &thpsize_shmem_enabled_attr.attr,
>>>    #endif
>>>        NULL,
>>>    };
>>>    -static const struct attribute_group thpsize_attr_group = {
>>> -    .attrs = thpsize_attrs,
>>> +static const struct attribute_group file_ctrl_attr_grp = {
>>> +    .attrs = file_ctrl_attrs,
>>>    };
>>>      static const struct kobj_type thpsize_ktype = {
>>> @@ -583,57 +591,99 @@ DEFINE_MTHP_STAT_ATTR(split, MTHP_STAT_SPLIT);
>>>    DEFINE_MTHP_STAT_ATTR(split_failed, MTHP_STAT_SPLIT_FAILED);
>>>    DEFINE_MTHP_STAT_ATTR(split_deferred, MTHP_STAT_SPLIT_DEFERRED);
>>>    -static struct attribute *stats_attrs[] = {
>>> +static struct attribute *anon_stats_attrs[] = {
>>>        &anon_fault_alloc_attr.attr,
>>>        &anon_fault_fallback_attr.attr,
>>>        &anon_fault_fallback_charge_attr.attr,
>>>        &swpout_attr.attr,
>>>        &swpout_fallback_attr.attr,
>>> -    &shmem_alloc_attr.attr,
>>> -    &shmem_fallback_attr.attr,
>>> -    &shmem_fallback_charge_attr.attr,
>>>        &split_attr.attr,
>>>        &split_failed_attr.attr,
>>>        &split_deferred_attr.attr,
>>>        NULL,
>>>    };
>>>    -static struct attribute_group stats_attr_group = {
>>> +static struct attribute_group anon_stats_attr_grp = {
>>> +    .name = "stats",
>>> +    .attrs = anon_stats_attrs,
>>> +};
>>> +
>>> +static struct attribute *file_stats_attrs[] = {
>>> +#ifdef CONFIG_SHMEM
>>> +    &shmem_alloc_attr.attr,
>>> +    &shmem_fallback_attr.attr,
>>> +    &shmem_fallback_charge_attr.attr,
>>
>> Shmem should also support swpout_* counters.
> 
> OK, so to put it another way, swpout_* stats are required all orders in
> (THP_ORDERS_ALL_ANON | THP_ORDERS_ALL_FILE_DEFAULT) if CONFIG_SHMEM is defined,
> else all orders in THP_ORDERS_ALL_ANON. Have I understood correctly?
> 
> If so, I'll fix that in the next version.

Yes, I think so.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ