| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240722093246.GY501857@google.com>
Date: Mon, 22 Jul 2024 10:32:46 +0100
From: Lee Jones <lee@...nel.org>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-pwm@...r.kernel.org,
Bartosz Golaszewski <brgl@...ev.pl>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh@...nel.org>,
Uwe Kleine-König <ukleinek@...nel.org>,
Haibo Chen <haibo.chen@....com>, Clark Wang <xiaoning.wang@....com>,
Frank Li <Frank.li@....com>
Subject: Re: [PATCH v6 2/4] mfd: adp5585: Add Analog Devices ADP5585 core
support
On Mon, 22 Jul 2024, Laurent Pinchart wrote:
> Hi Lee,
>
> Thank you for the review.
>
> On Mon, Jul 22, 2024 at 09:56:29AM +0100, Lee Jones wrote:
> > On Sun, 21 Jul 2024, Laurent Pinchart wrote:
> >
> > > From: Haibo Chen <haibo.chen@....com>
> > >
> > > The ADP5585 is a 10/11 input/output port expander with a built in keypad
> > > matrix decoder, programmable logic, reset generator, and PWM generator.
> > > This driver supports the chip by modelling it as an MFD device, with two
> > > child devices for the GPIO and PWM functions.
> > >
> > > The driver is derived from an initial implementation from NXP, available
> > > in commit 8059835bee19 ("MLK-25917-1 mfd: adp5585: add ADI adp5585 core
> > > support") in their BSP kernel tree. It has been extensively rewritten.
> > >
> > > Signed-off-by: Haibo Chen <haibo.chen@....com>
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> > > ---
> > > Changes since v4:
> > >
> > > - One more GENMASK() usage
> > > - Include err.h
> > >
> > > Changes since v2:
> > >
> > > - Add missing and remove extraneous headers
> > > - Use i2c_get_match_data()
> > > - Drop unneeded parentheses
> > > - Use GENMASK()
> > > - Drop of_match_ptr()
> > > - Allow compilation on !OF with COMPILE_TEST
> > > - Replace ADP5585_MAN_ID() macro with ADP5585_MAN_ID_MASK
> > > - Drop unneeded macro
> > >
> > > Changes since v1:
> > >
> > > - Add comment to explain BANK and BIT macros
> > > - Drop compatible strings from cells
> > > - White space fixes
> > > - Fix comparison to NULL
> > >
> > > Changes compared to the NXP original version:
> > >
> > > - Add MAINTAINERS entry
> > > - Fix compatible strings for child devices
> > > - Fix header guards
> > > - Use lowercase hex constants
> > > - White space fixes
> > > - Use module_i2c_driver()
> > > - Switch to regmap
> > > - Drop I2C device ID table
> > > - Drop ADP5585_REG_MASK
> > > - Support R5 GPIO pin
> > > - Drop dev field from adp5585_dev structure
> > > - Check device ID at probe time
> > > - Fix register field names
> > > - Update copyright
> > > - Update license to GPL-2.0-only
> > > - Implement suspend/resume
> > > ---
> > > MAINTAINERS | 2 +
> > > drivers/mfd/Kconfig | 12 +++
> > > drivers/mfd/Makefile | 1 +
> > > drivers/mfd/adp5585.c | 200 ++++++++++++++++++++++++++++++++++++
> > > include/linux/mfd/adp5585.h | 126 +++++++++++++++++++++++
> > > 5 files changed, 341 insertions(+)
> > > create mode 100644 drivers/mfd/adp5585.c
> > > create mode 100644 include/linux/mfd/adp5585.h
> > >
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 4fe8bd8752a5..ebb1a1833bbc 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -532,6 +532,8 @@ L: linux-gpio@...r.kernel.org
> > > L: linux-pwm@...r.kernel.org
> > > S: Maintained
> > > F: Documentation/devicetree/bindings/*/adi,adp5585*.yaml
> > > +F: drivers/mfd/adp5585.c
> > > +F: include/linux/mfd/adp5585.h
> > >
> > > ADP5588 QWERTY KEYPAD AND IO EXPANDER DRIVER (ADP5588/ADP5587)
> > > M: Michael Hennerich <michael.hennerich@...log.com>
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > index 266b4f54af60..05e8e1f0b602 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -20,6 +20,18 @@ config MFD_CS5535
> > > This is the core driver for CS5535/CS5536 MFD functions. This is
> > > necessary for using the board's GPIO and MFGPT functionality.
> > >
> > > +config MFD_ADP5585
> > > + tristate "Analog Devices ADP5585 MFD driver"
> >
> > It's not an MFD driver (whatever one of those is), is a Keypad Decoder
> > and I/O Expander.
>
> OK.
>
> > > + select MFD_CORE
> > > + select REGMAP_I2C
> > > + depends on I2C
> > > + depends on OF || COMPILE_TEST
> > > + help
> > > + Say yes here to add support for the Analog Devices ADP5585 GPIO
> > > + expander, PWM and keypad controller. This includes the I2C driver and
> > > + the core APIs _only_, you have to select individual components like
> > > + the GPIO and PWM functions under the corresponding menus.
> > > +
> > > config MFD_ALTERA_A10SR
> > > bool "Altera Arria10 DevKit System Resource chip"
> > > depends on ARCH_INTEL_SOCFPGA && SPI_MASTER=y && OF
> > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > > index c66f07edcd0e..37f36a019a68 100644
> > > --- a/drivers/mfd/Makefile
> > > +++ b/drivers/mfd/Makefile
> > > @@ -188,6 +188,7 @@ obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o
> > > obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
> > > obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
> > > obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
> > > +obj-$(CONFIG_MFD_ADP5585) += adp5585.o
> > > obj-$(CONFIG_MFD_KEMPLD) += kempld-core.o
> > > obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o
> > > obj-$(CONFIG_LPC_SCH) += lpc_sch.o
> > > diff --git a/drivers/mfd/adp5585.c b/drivers/mfd/adp5585.c
> > > new file mode 100644
> > > index 000000000000..5dc3e47a0533
> > > --- /dev/null
> > > +++ b/drivers/mfd/adp5585.c
> > > @@ -0,0 +1,200 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Analog Devices ADP5585 I/O expander, PWM controller and keypad controller
> > > + *
> > > + * Copyright 2022 NXP
> > > + * Copyright 2024 Ideas on Board Oy
> > > + */
> > > +
> > > +#include <linux/array_size.h>
> > > +#include <linux/device.h>
> > > +#include <linux/err.h>
> > > +#include <linux/i2c.h>
> > > +#include <linux/mfd/adp5585.h>
> > > +#include <linux/mfd/core.h>
> > > +#include <linux/mod_devicetable.h>
> > > +#include <linux/module.h>
> > > +#include <linux/regmap.h>
> > > +#include <linux/types.h>
> > > +
> > > +static const struct mfd_cell adp5585_devs[] = {
> > > + { .name = "adp5585-gpio", },
> > > + { .name = "adp5585-pwm", },
> > > +};
> > > +
> > > +static const struct regmap_range adp5585_volatile_ranges[] = {
> > > + regmap_reg_range(ADP5585_ID, ADP5585_GPI_STATUS_B),
> > > +};
> > > +
> > > +static const struct regmap_access_table adp5585_volatile_regs = {
> > > + .yes_ranges = adp5585_volatile_ranges,
> > > + .n_yes_ranges = ARRAY_SIZE(adp5585_volatile_ranges),
> > > +};
> > > +
> > > +static const u8 adp5585_regmap_defaults_00[ADP5585_MAX_REG + 1] = {
> > > + /* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x18 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +};
> > > +
> > > +static const u8 adp5585_regmap_defaults_02[ADP5585_MAX_REG + 1] = {
> > > + /* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3,
> > > + /* 0x18 */ 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +};
> > > +
> > > +static const u8 adp5585_regmap_defaults_04[ADP5585_MAX_REG + 1] = {
> > > + /* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55,
> > > + /* 0x18 */ 0x05, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + /* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00,
> > > +};
> >
> > This 'patches', 'default's whatever you want to call them are horrid!
>
> As far as I understand, that's what regmap requires to handle default
> register values when using the regmap cache. Is there a better way ?
Not that I'm aware of - I just like to moan! :(
> > > +enum adp5585_regmap_type {
> > > + ADP5585_REGMAP_00,
> > > + ADP5585_REGMAP_02,
> > > + ADP5585_REGMAP_04,
> > > +};
> >
> > What is a type 00, 02 and 04?
>
> Those are devices variants, described in the datasheet. -00 is the
> default, -02 doesn't have internal pull-up resistors, and -04 has
> pull-down resistors instead. See
> https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5585.pdf
> if you're curious.
Comments please.
> > > +static const struct regmap_config adp5585_regmap_configs[] = {
> > > + [ADP5585_REGMAP_00] = {
> > > + .reg_bits = 8,
> > > + .val_bits = 8,
> > > + .max_register = ADP5585_MAX_REG,
> > > + .volatile_table = &adp5585_volatile_regs,
> > > + .cache_type = REGCACHE_MAPLE,
> > > + .reg_defaults_raw = adp5585_regmap_defaults_00,
> > > + .num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_00),
> > > + },
> > > + [ADP5585_REGMAP_02] = {
> > > + .reg_bits = 8,
> > > + .val_bits = 8,
> > > + .max_register = ADP5585_MAX_REG,
> > > + .volatile_table = &adp5585_volatile_regs,
> > > + .cache_type = REGCACHE_MAPLE,
> > > + .reg_defaults_raw = adp5585_regmap_defaults_02,
> > > + .num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_02),
> > > + },
> > > + [ADP5585_REGMAP_04] = {
> > > + .reg_bits = 8,
> > > + .val_bits = 8,
> > > + .max_register = ADP5585_MAX_REG,
> > > + .volatile_table = &adp5585_volatile_regs,
> > > + .cache_type = REGCACHE_MAPLE,
> > > + .reg_defaults_raw = adp5585_regmap_defaults_04,
> > > + .num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_04),
> > > + },
> > > +};
> > > +
> > > +static int adp5585_i2c_probe(struct i2c_client *i2c)
> > > +{
> > > + const struct regmap_config *regmap_config;
> > > + struct adp5585_dev *adp5585;
> > > + unsigned int id;
> > > + int ret;
> > > +
> > > + adp5585 = devm_kzalloc(&i2c->dev, sizeof(struct adp5585_dev),
> >
> > sizeof(*adp5585)
>
> Indeed, not sure how I missed that.
>
> > > + GFP_KERNEL);
> >
> > No need to line-wrap here - user 100 chars to improve readability.
> >
> > > + if (!adp5585)
> > > + return -ENOMEM;
> > > +
> > > + i2c_set_clientdata(i2c, adp5585);
> > > +
> > > + regmap_config = i2c_get_match_data(i2c);
> > > + adp5585->regmap = devm_regmap_init_i2c(i2c, regmap_config);
> >
> > Is regmap_config guaranteed to be !NULL?
>
> Unless someone modifies the driver without understanding what they're
> doing, yes. Please see below.
>
> > How would devm_regmap_init_i2c() handle that if it were?
> >
> > > + if (IS_ERR(adp5585->regmap))
> > > + return dev_err_probe(&i2c->dev, PTR_ERR(adp5585->regmap),
> > > + "Failed to initialize register map\n");
> > > +
> > > + /* Verify the device ID. */
> >
> > Probably superfluous.
>
> The comment, or verifying the ID ?
The comment.
> > > + ret = regmap_read(adp5585->regmap, ADP5585_ID, &id);
> > > + if (ret)
> > > + return dev_err_probe(&i2c->dev, ret,
> > > + "Failed to read device ID\n");
> > > +
> > > + if ((id & ADP5585_MAN_ID_MASK) != ADP5585_MAN_ID_VALUE)
> > > + return dev_err_probe(&i2c->dev, -ENODEV,
> > > + "Invalid device ID 0x%02x\n", id);
> > > +
> > > + dev_dbg(&i2c->dev, "device ID 0x%02x\n", id);
> >
> > How often to you think this well be useful post-dev?
> >
> > I'd wager, never.
>
> I'll drop that.
>
> > > +
> > > + /* Add MFD devices. */
> >
> > Definitely superfluous.
>
> I assume you mean the comment only :-) I can drop it.
Si.
> > > + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
> > > + adp5585_devs, ARRAY_SIZE(adp5585_devs),
> > > + NULL, 0, NULL);
> > > + if (ret)
> > > + return dev_err_probe(&i2c->dev, ret,
> > > + "Failed to add MFD devices\n");
> >
> > s/MFD/child/
> >
> > Or
> >
> > s/MFD /sub-/
> >
> > > + return 0;
> > > +}
> > > +
> > > +static int adp5585_suspend(struct device *dev)
> > > +{
> > > + struct adp5585_dev *adp5585 = dev_get_drvdata(dev);
> > > +
> > > + regcache_cache_only(adp5585->regmap, true);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int adp5585_resume(struct device *dev)
> > > +{
> > > + struct adp5585_dev *adp5585 = dev_get_drvdata(dev);
> > > +
> > > + regcache_cache_only(adp5585->regmap, false);
> > > + regcache_mark_dirty(adp5585->regmap);
> > > +
> > > + return regcache_sync(adp5585->regmap);
> > > +}
> > > +
> > > +static DEFINE_SIMPLE_DEV_PM_OPS(adp5585_pm, adp5585_suspend, adp5585_resume);
> > > +
> > > +static const struct of_device_id adp5585_of_match[] = {
> > > + {
> > > + .compatible = "adi,adp5585-00",
> > > + .data = &adp5585_regmap_configs[ADP5585_REGMAP_00],
> > > + }, {
> > > + .compatible = "adi,adp5585-01",
> > > + .data = &adp5585_regmap_configs[ADP5585_REGMAP_00],
> > > + }, {
> > > + .compatible = "adi,adp5585-02",
> > > + .data = &adp5585_regmap_configs[ADP5585_REGMAP_02],
> > > + }, {
> > > + .compatible = "adi,adp5585-03",
> > > + .data = &adp5585_regmap_configs[ADP5585_REGMAP_00],
> > > + }, {
> > > + .compatible = "adi,adp5585-04",
> > > + .data = &adp5585_regmap_configs[ADP5585_REGMAP_04],
> > > + }, {
> >
> > { .compatible = "adi,adp5585-05" }, /* Whoops, did I just dereference a NULL poiner? */
>
> Don't add an entry without .data.
>
> { .compatible = "adi,adp5585-05", .data = (void *)ADP5585_REGMAP_05 },
>
> would also lead to problems. Someone adding support for a new variant is
> expected to understand a bit of the driver. Furthemore, the NULL pointer
> dereference would be caught immediately at development time, so it won't
> make it to mainline. I don't think this calls for a runtime check in
> probe().
Your call. Just so long as you've thought about it.
> > > + { /* sentinel */ }
> >
> > Comment sounds cool, but is it necessary?
>
> That's the common practice, and I think it makes the code clearer..
I used to think it was cool when it was first introduced.
Now I just think it's silly. But again, your call.
> > > +};
> > > +MODULE_DEVICE_TABLE(of, adp5585_of_match);
> > > +
> > > +static struct i2c_driver adp5585_i2c_driver = {
> > > + .driver = {
> > > + .name = "adp5585",
> > > + .of_match_table = adp5585_of_match,
> > > + .pm = pm_sleep_ptr(&adp5585_pm),
> > > + },
> > > + .probe = adp5585_i2c_probe,
> > > +};
> > > +module_i2c_driver(adp5585_i2c_driver);
> > > +
> > > +MODULE_DESCRIPTION("ADP5585 core driver");
> > > +MODULE_AUTHOR("Haibo Chen <haibo.chen@....com>");
> > > +MODULE_LICENSE("GPL");
> > > diff --git a/include/linux/mfd/adp5585.h b/include/linux/mfd/adp5585.h
> > > new file mode 100644
> > > index 000000000000..25025b381c63
> > > --- /dev/null
> > > +++ b/include/linux/mfd/adp5585.h
> > > @@ -0,0 +1,126 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Analog Devices ADP5585 I/O expander, PWM controller and keypad controller
> > > + *
> > > + * Copyright 2022 NXP
> > > + * Copyright 2024 Ideas on Board Oy
> > > + */
> > > +
> > > +#ifndef __LINUX_MFD_ADP5585_H_
> >
> > You can probably drop the LINUX_ part.
>
> $ git grep 'ifndef.*_H_\?$' include/linux/ | grep LINUX_ | wc -l
> 1408
> $ git grep 'ifndef.*_H_\?$' include/linux/ | grep -v LINUX_ | wc -l
> 804
>
> Namespacing the header guards seems a good practice to me. I agree that
> we will likely not have another mfd/adp5585.h file in any other
> directory in include/, so that's more of a theoretical concern, but can
> I still go with the majority practice ?
It only really makes sense if you're also writing drivers for other OSes.
> > > +#define __LINUX_MFD_ADP5585_H_
> > > +
> > > +#include <linux/bits.h>
> > > +
> > > +#define ADP5585_ID 0x00
> > > +#define ADP5585_MAN_ID_VALUE 0x20
> > > +#define ADP5585_MAN_ID_MASK GENMASK(7, 4)
> > > +#define ADP5585_INT_STATUS 0x01
> > > +#define ADP5585_STATUS 0x02
> > > +#define ADP5585_FIFO_1 0x03
> > > +#define ADP5585_FIFO_2 0x04
> > > +#define ADP5585_FIFO_3 0x05
> > > +#define ADP5585_FIFO_4 0x06
> > > +#define ADP5585_FIFO_5 0x07
> > > +#define ADP5585_FIFO_6 0x08
> > > +#define ADP5585_FIFO_7 0x09
> > > +#define ADP5585_FIFO_8 0x0a
> > > +#define ADP5585_FIFO_9 0x0b
> > > +#define ADP5585_FIFO_10 0x0c
> > > +#define ADP5585_FIFO_11 0x0d
> > > +#define ADP5585_FIFO_12 0x0e
> > > +#define ADP5585_FIFO_13 0x0f
> > > +#define ADP5585_FIFO_14 0x10
> > > +#define ADP5585_FIFO_15 0x11
> > > +#define ADP5585_FIFO_16 0x12
> > > +#define ADP5585_GPI_INT_STAT_A 0x13
> > > +#define ADP5585_GPI_INT_STAT_B 0x14
> > > +#define ADP5585_GPI_STATUS_A 0x15
> > > +#define ADP5585_GPI_STATUS_B 0x16
> > > +#define ADP5585_RPULL_CONFIG_A 0x17
> > > +#define ADP5585_RPULL_CONFIG_B 0x18
> > > +#define ADP5585_RPULL_CONFIG_C 0x19
> > > +#define ADP5585_RPULL_CONFIG_D 0x1a
> > > +#define ADP5585_Rx_PULL_CFG_PU_300K 0
> >
> > Assuming these are bits - 2 spaces is usually enough.
>
> I find a tab tobe more readable. Is this a showstopper or can I keep the
> tab ?
No show stoppers, just what I've seen more regularly/personal preference.
> > > +#define ADP5585_Rx_PULL_CFG_PD_300K 1
> > > +#define ADP5585_Rx_PULL_CFG_PU_100K 2
> > > +#define ADP5585_Rx_PULL_CFG_DISABLE 3
> > > +#define ADP5585_Rx_PULL_CFG_MASK 3
> > > +#define ADP5585_GPI_INT_LEVEL_A 0x1b
> > > +#define ADP5585_GPI_INT_LEVEL_B 0x1c
> > > +#define ADP5585_GPI_EVENT_EN_A 0x1d
> > > +#define ADP5585_GPI_EVENT_EN_B 0x1e
> > > +#define ADP5585_GPI_INTERRUPT_EN_A 0x1f
> > > +#define ADP5585_GPI_INTERRUPT_EN_B 0x20
> > > +#define ADP5585_DEBOUNCE_DIS_A 0x21
> > > +#define ADP5585_DEBOUNCE_DIS_B 0x22
> > > +#define ADP5585_GPO_DATA_OUT_A 0x23
> > > +#define ADP5585_GPO_DATA_OUT_B 0x24
> > > +#define ADP5585_GPO_OUT_MODE_A 0x25
> > > +#define ADP5585_GPO_OUT_MODE_B 0x26
> > > +#define ADP5585_GPIO_DIRECTION_A 0x27
> > > +#define ADP5585_GPIO_DIRECTION_B 0x28
> > > +#define ADP5585_RESET1_EVENT_A 0x29
> > > +#define ADP5585_RESET1_EVENT_B 0x2a
> > > +#define ADP5585_RESET1_EVENT_C 0x2b
> > > +#define ADP5585_RESET2_EVENT_A 0x2c
> > > +#define ADP5585_RESET2_EVENT_B 0x2d
> > > +#define ADP5585_RESET_CFG 0x2e
> > > +#define ADP5585_PWM_OFFT_LOW 0x2f
> > > +#define ADP5585_PWM_OFFT_HIGH 0x30
> > > +#define ADP5585_PWM_ONT_LOW 0x31
> > > +#define ADP5585_PWM_ONT_HIGH 0x32
> > > +#define ADP5585_PWM_CFG 0x33
> > > +#define ADP5585_PWM_IN_AND BIT(2)
> > > +#define ADP5585_PWM_MODE BIT(1)
> > > +#define ADP5585_PWM_EN BIT(0)
> > > +#define ADP5585_LOGIC_CFG 0x34
> > > +#define ADP5585_LOGIC_FF_CFG 0x35
> > > +#define ADP5585_LOGIC_INT_EVENT_EN 0x36
> > > +#define ADP5585_POLL_PTIME_CFG 0x37
> > > +#define ADP5585_PIN_CONFIG_A 0x38
> > > +#define ADP5585_PIN_CONFIG_B 0x39
> > > +#define ADP5585_PIN_CONFIG_C 0x3a
> > > +#define ADP5585_PULL_SELECT BIT(7)
> > > +#define ADP5585_C4_EXTEND_CFG_GPIO11 (0U << 6)
> > > +#define ADP5585_C4_EXTEND_CFG_RESET2 (1U << 6)
> > > +#define ADP5585_C4_EXTEND_CFG_MASK GENMASK(6, 6)
> > > +#define ADP5585_R4_EXTEND_CFG_GPIO5 (0U << 5)
> > > +#define ADP5585_R4_EXTEND_CFG_RESET1 (1U << 5)
> > > +#define ADP5585_R4_EXTEND_CFG_MASK GENMASK(5, 5)
> > > +#define ADP5585_R3_EXTEND_CFG_GPIO4 (0U << 2)
> > > +#define ADP5585_R3_EXTEND_CFG_LC (1U << 2)
> > > +#define ADP5585_R3_EXTEND_CFG_PWM_OUT (2U << 2)
> > > +#define ADP5585_R3_EXTEND_CFG_MASK GENMASK(3, 2)
> > > +#define ADP5585_R0_EXTEND_CFG_GPIO1 (0U << 0)
> > > +#define ADP5585_R0_EXTEND_CFG_LY (1U << 0)
> > > +#define ADP5585_R0_EXTEND_CFG_MASK GENMASK(0, 0)
> > > +#define ADP5585_GENERAL_CFG 0x3b
> > > +#define ADP5585_OSC_EN BIT(7)
> > > +#define ADP5585_OSC_FREQ_50KHZ (0U << 5)
> > > +#define ADP5585_OSC_FREQ_100KHZ (1U << 5)
> > > +#define ADP5585_OSC_FREQ_200KHZ (2U << 5)
> > > +#define ADP5585_OSC_FREQ_500KHZ (3U << 5)
> > > +#define ADP5585_OSC_FREQ_MASK GENMASK(6, 5)
> > > +#define ADP5585_INT_CFG BIT(1)
> > > +#define ADP5585_RST_CFG BIT(0)
> > > +#define ADP5585_INT_EN 0x3c
> > > +
> > > +#define ADP5585_MAX_REG ADP5585_INT_EN
> > > +
> > > +/*
> > > + * Bank 0 covers pins "GPIO 1/R0" to "GPIO 6/R5", numbered 0 to 5 by the
> > > + * driver, and bank 1 covers pins "GPIO 7/C0" to "GPIO 11/C4", numbered 6 to
> > > + * 10. Some variants of the ADP5585 don't support "GPIO 6/R5". As the driver
> > > + * uses identical GPIO numbering for all variants to avoid confusion, GPIO 5 is
> > > + * marked as reserved in the device tree for variants that don't support it.
> > > + */
> > > +#define ADP5585_BANK(n) ((n) >= 6 ? 1 : 0)
> > > +#define ADP5585_BIT(n) ((n) >= 6 ? BIT((n) - 6) : BIT(n))
> > > +
> > > +struct regmap;
> > > +
> > > +struct adp5585_dev {
> > > + struct regmap *regmap;
> > > +};
> > > +
> > > +#endif
>
> --
> Regards,
>
> Laurent Pinchart
--
Lee Jones [李琼斯]
Powered by blists - more mailing lists