[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240722094226.21602-6-ysionneau@kalrayinc.com>
Date: Mon, 22 Jul 2024 11:41:16 +0200
From: ysionneau@...rayinc.com
To: linux-kernel@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>, Rob
Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor
Dooley <conor+dt@...nel.org>, Jonathan Borne <jborne@...rayinc.com>, Julian
Vetter <jvetter@...rayinc.com>, Yann Sionneau <ysionneau@...rayinc.com>
Cc: Jules Maselbas <jmaselbas@...v.net>, devicetree@...r.kernel.org
Subject: [RFC PATCH v3 05/37] dt-bindings: Add binding for
kalray,coolidge-apic-mailbox
From: Yann Sionneau <ysionneau@...rayinc.com>
Add binding for Kalray Coolidge APIC Mailbox interrupt-controller.
Co-developed-by: Jules Maselbas <jmaselbas@...v.net>
Signed-off-by: Jules Maselbas <jmaselbas@...v.net>
Signed-off-by: Yann Sionneau <ysionneau@...rayinc.com>
---
Notes:
V2 -> V3: Fixed bindings to adhere to dt-schema
---
.../kalray,coolidge-apic-mailbox.yaml | 90 +++++++++++++++++++
1 file changed, 90 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-apic-mailbox.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-apic-mailbox.yaml b/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-apic-mailbox.yaml
new file mode 100644
index 0000000000000..334b816b80583
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/kalray,coolidge-apic-mailbox.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/kalray,coolidge-apic-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kalray Coolidge APIC-Mailbox
+
+maintainers:
+ - Jonathan Borne <jborne@...rayinc.com>
+ - Julian Vetter <jvetter@...rayinc.com>
+ - Yann Sionneau <ysionneau@...rayinc.com>
+
+description: |
+ Each cluster in the Coolidge SoC includes an Advanced Programmable Interrupt
+ Controller (APIC) which is split in two part:
+ - a Generic Interrupt Controller (referred as APIC-GIC)
+ - a Mailbox Controller (referred as APIC-Mailbox)
+ The APIC-Mailbox contains 128 mailboxes of 8 bytes (size of a word),
+ this hardware block is basically a 1 KB of smart memory space.
+ Each mailbox can be independently configured with a trigger condition
+ and an input mode function.
+
+ Input mode are:
+ - write
+ - bitwise OR
+ - add
+
+ Interrupts are generated on a write when the mailbox content value
+ match the configured trigger condition.
+ Available conditions are:
+ - doorbell: always raise interruption on write
+ - match: when the mailbox's value equal the configured trigger value
+ - barrier: same as match but the mailbox's value is cleared on trigger
+ - threshold: when the mailbox's value is greater than, or equal to, the
+ configured trigger value
+
+ Since this hardware block generates IRQs based on writes to some memory
+ locations, it is both an interrupt controller and an MSI controller.
+
+properties:
+ compatible:
+ const: kalray,coolidge-apic-mailbox
+
+ reg:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 0
+ description:
+ The IRQ number.
+
+ "#address-cells":
+ const: 0
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 128
+ minItems: 1
+ description: |
+ Specifies the interrupt line(s) in the interrupt-parent controller node;
+ valid values depend on the type of parent interrupt controller
+
+ msi-controller: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#interrupt-cells"
+ - "#address-cells"
+ - interrupt-controller
+ - interrupts
+ - msi-controller
+
+examples:
+ - |
+ apic_mailbox: interrupt-controller@...000 {
+ compatible = "kalray,coolidge-apic-mailbox";
+ reg = <0 0xa00000 0 0x0f200>;
+ #interrupt-cells = <0>;
+ interrupt-controller;
+ interrupt-parent = <&apic_gic>;
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, <9>;
+ msi-controller;
+ };
+
+...
--
2.45.2
Powered by blists - more mailing lists