| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240722145106.GJ13497@pendragon.ideasonboard.com>
Date: Mon, 22 Jul 2024 17:51:06 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Changhuang Liang <changhuang.liang@...rfivetech.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Jean-Michel Hautbois <jeanmichel.hautbois@...asonboard.com>,
Benjamin Gaignard <benjamin.gaignard@...labora.com>,
Tomi Valkeinen <tomi.valkeinen+renesas@...asonboard.com>,
Mingjia Zhang <mingjia.zhang@...iatek.com>,
Jack Zhu <jack.zhu@...rfivetech.com>,
Keith Zhao <keith.zhao@...rfivetech.com>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-staging@...ts.linux.dev
Subject: Re: [PATCH v5 04/14] staging: media: starfive: Add a params sink pad
and a scd source pad for ISP
Hello Changhuang,
Thank you for the patch.
On Tue, Jul 09, 2024 at 01:38:14AM -0700, Changhuang Liang wrote:
> StarFive ISP can use params sink pad to transmit ISP parameters and use
> scd source pad to capture statistics collection data.
>
> Signed-off-by: Changhuang Liang <changhuang.liang@...rfivetech.com>
> ---
> .../staging/media/starfive/camss/stf-isp.c | 77 +++++++++++++++++--
> .../staging/media/starfive/camss/stf-isp.h | 2 +
> 2 files changed, 71 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/staging/media/starfive/camss/stf-isp.c b/drivers/staging/media/starfive/camss/stf-isp.c
> index 4e6e26736852..0ebffd09842a 100644
> --- a/drivers/staging/media/starfive/camss/stf-isp.c
> +++ b/drivers/staging/media/starfive/camss/stf-isp.c
> @@ -21,13 +21,23 @@ static const struct stf_isp_format isp_formats_sink[] = {
> { MEDIA_BUS_FMT_SBGGR10_1X10, 10 },
> };
>
> +static const struct stf_isp_format isp_formats_sink_params[] = {
> + { MEDIA_BUS_FMT_METADATA_FIXED },
> +};
> +
> static const struct stf_isp_format isp_formats_source[] = {
> { MEDIA_BUS_FMT_YUYV8_1_5X8, 8 },
> };
>
> +static const struct stf_isp_format isp_formats_source_scd[] = {
> + { MEDIA_BUS_FMT_METADATA_FIXED },
> +};
> +
> static const struct stf_isp_format_table isp_formats_st7110[] = {
> { isp_formats_sink, ARRAY_SIZE(isp_formats_sink) },
> + { isp_formats_sink_params, ARRAY_SIZE(isp_formats_sink_params) },
> { isp_formats_source, ARRAY_SIZE(isp_formats_source) },
> + { isp_formats_source_scd, ARRAY_SIZE(isp_formats_source_scd) },
> };
>
> static const struct stf_isp_format *
> @@ -93,13 +103,19 @@ static void isp_try_format(struct stf_isp_dev *isp_dev,
>
> formats = &isp_dev->formats[pad];
>
> - fmt->width = clamp_t(u32, fmt->width, STFCAMSS_FRAME_MIN_WIDTH,
> - STFCAMSS_FRAME_MAX_WIDTH);
> - fmt->height = clamp_t(u32, fmt->height, STFCAMSS_FRAME_MIN_HEIGHT,
> - STFCAMSS_FRAME_MAX_HEIGHT);
> - fmt->height &= ~0x1;
> + if (pad != STF_ISP_PAD_SRC_SCD && pad != STF_ISP_PAD_SINK_PARAMS) {
> + fmt->width = clamp_t(u32, fmt->width, STFCAMSS_FRAME_MIN_WIDTH,
> + STFCAMSS_FRAME_MAX_WIDTH);
> + fmt->height = clamp_t(u32, fmt->height, STFCAMSS_FRAME_MIN_HEIGHT,
> + STFCAMSS_FRAME_MAX_HEIGHT);
> + fmt->height &= ~0x1;
> + fmt->colorspace = V4L2_COLORSPACE_SRGB;
> + } else {
> + fmt->width = 1;
> + fmt->height = 1;
You should set fmt->colorspace here too. I think you can set it to 0.
> + }
> +
> fmt->field = V4L2_FIELD_NONE;
> - fmt->colorspace = V4L2_COLORSPACE_SRGB;
> fmt->flags = 0;
>
> if (!stf_g_fmt_by_mcode(formats, fmt->code))
> @@ -119,7 +135,7 @@ static int isp_enum_mbus_code(struct v4l2_subdev *sd,
>
> formats = &isp_dev->formats[code->pad];
> code->code = formats->fmts[code->index].code;
> - } else {
> + } else if (code->pad == STF_ISP_PAD_SRC) {
> struct v4l2_mbus_framefmt *sink_fmt;
>
> if (code->index >= ARRAY_SIZE(isp_formats_source))
> @@ -131,6 +147,10 @@ static int isp_enum_mbus_code(struct v4l2_subdev *sd,
> code->code = sink_fmt->code;
> if (!code->code)
> return -EINVAL;
> + } else {
> + if (code->index > 0)
> + return -EINVAL;
> + code->code = MEDIA_BUS_FMT_METADATA_FIXED;
> }
> code->flags = 0;
>
> @@ -151,6 +171,9 @@ static int isp_set_format(struct v4l2_subdev *sd,
> isp_try_format(isp_dev, state, fmt->pad, &fmt->format);
> *format = fmt->format;
>
> + if (fmt->pad == STF_ISP_PAD_SRC_SCD || fmt->pad == STF_ISP_PAD_SINK_PARAMS)
> + return 0;
> +
> isp_dev->current_fmt = stf_g_fmt_by_mcode(&isp_dev->formats[fmt->pad],
> fmt->format.code);
>
> @@ -202,6 +225,9 @@ static int isp_get_selection(struct v4l2_subdev *sd,
> struct v4l2_subdev_format fmt = { 0 };
> struct v4l2_rect *rect;
>
> + if (sel->pad == STF_ISP_PAD_SRC_SCD || sel->pad == STF_ISP_PAD_SINK_PARAMS)
> + return -EINVAL;
> +
> switch (sel->target) {
> case V4L2_SEL_TGT_CROP_BOUNDS:
> if (sel->pad == STF_ISP_PAD_SINK) {
> @@ -239,6 +265,9 @@ static int isp_set_selection(struct v4l2_subdev *sd,
> struct stf_isp_dev *isp_dev = v4l2_get_subdevdata(sd);
> struct v4l2_rect *rect;
>
> + if (sel->pad == STF_ISP_PAD_SRC_SCD || sel->pad == STF_ISP_PAD_SINK_PARAMS)
> + return -EINVAL;
> +
> if (sel->target != V4L2_SEL_TGT_CROP)
> return -EINVAL;
>
> @@ -296,8 +325,38 @@ static int isp_init_formats(struct v4l2_subdev *sd,
While at it, you could rename the function to isp_init_state().
> .height = 1080
> }
> };
> + struct v4l2_subdev_format format_params = {
> + .pad = STF_ISP_PAD_SINK_PARAMS,
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
That's not quite right, as the .init_state() handler is used to
initialized both the TRY and ACTIVE states. As the "which" field is
currently ignored through the driver the code should behave correctly
(as far as I can tell), but you may want at some point to initialize the
formats and selection rectangles directly in this function instead of
calling isp_set_format().
> + .format = {
> + .code = MEDIA_BUS_FMT_METADATA_FIXED,
> + .width = 1,
> + .height = 1
According to
https://docs.kernel.org/userspace-api/media/v4l/subdev-formats.html#metadata-formats,
width and height should be set to 0 for MEDIA_BUS_FMT_METADATA_FIXED.
> + }
> + };
> + struct v4l2_subdev_format format_scd = {
> + .pad = STF_ISP_PAD_SRC_SCD,
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + .format = {
> + .code = MEDIA_BUS_FMT_METADATA_FIXED,
> + .width = 1,
> + .height = 1
> + }
> + };
> + int ret;
> +
> + /* Init for STF_ISP_PAD_SINK and STF_ISP_PAD_SRC pad */
> + ret = isp_set_format(sd, sd_state, &format);
> + if (ret < 0)
> + return ret;
> +
> + /* Init for STF_ISP_PAD_SINK_PARAMS pad */
> + ret = isp_set_format(sd, sd_state, &format_params);
> + if (ret < 0)
> + return ret;
>
> - return isp_set_format(sd, sd_state, &format);
> + /* Init for STF_ISP_PAD_SRC_SCD pad */
> + return isp_set_format(sd, sd_state, &format_scd);
> }
>
> static const struct v4l2_subdev_video_ops isp_video_ops = {
> @@ -338,7 +397,9 @@ int stf_isp_register(struct stf_isp_dev *isp_dev, struct v4l2_device *v4l2_dev)
> v4l2_set_subdevdata(sd, isp_dev);
>
> pads[STF_ISP_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> + pads[STF_ISP_PAD_SINK_PARAMS].flags = MEDIA_PAD_FL_SINK;
> pads[STF_ISP_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
> + pads[STF_ISP_PAD_SRC_SCD].flags = MEDIA_PAD_FL_SOURCE;
>
> sd->entity.function = MEDIA_ENT_F_PROC_VIDEO_ISP;
> sd->entity.ops = &isp_media_ops;
> diff --git a/drivers/staging/media/starfive/camss/stf-isp.h b/drivers/staging/media/starfive/camss/stf-isp.h
> index 955cbb048363..bc7e7b0736fa 100644
> --- a/drivers/staging/media/starfive/camss/stf-isp.h
> +++ b/drivers/staging/media/starfive/camss/stf-isp.h
> @@ -392,7 +392,9 @@
> /* pad id for media framework */
> enum stf_isp_pad_id {
> STF_ISP_PAD_SINK = 0,
> + STF_ISP_PAD_SINK_PARAMS,
> STF_ISP_PAD_SRC,
> + STF_ISP_PAD_SRC_SCD,
> STF_ISP_PAD_MAX
> };
>
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists