[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <229cecc5-33b9-4ab7-bd3b-3243415cfa4e@collabora.com>
Date: Tue, 23 Jul 2024 15:48:49 +0200
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
To: Hsin-Te Yuan <yuanhsinte@...omium.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Matthias Brugger <matthias.bgg@...il.com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH] arm64: dts: mt8183: Add kukui-jacuzzi-cerise series
boards
Il 23/07/24 11:56, Hsin-Te Yuan ha scritto:
> Cerise is known as ASUS Chromebook CZ1.
> Stern is known as ASUS Chromebook Flip CZ1.
>
> Signed-off-by: Hsin-Te Yuan <yuanhsinte@...omium.org>
> ---
> .../dts/mediatek/mt8183-kukui-jacuzzi-cerise.dts | 25 ++++++++++++++++
> .../dts/mediatek/mt8183-kukui-jacuzzi-cerise.dtsi | 21 +++++++++++++
> .../dts/mediatek/mt8183-kukui-jacuzzi-stern.dts | 35 ++++++++++++++++++++++
> 3 files changed, 81 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cerise.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cerise.dts
> new file mode 100644
> index 000000000000..b4f4ed701253
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cerise.dts
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2021 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8183-kukui-jacuzzi-cerise.dtsi"
> +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
> +
> +/ {
> + model = "Google cerise board";
> + compatible = "google,cerise-sku0", "google,cerise", "mediatek,mt8183";
> +};
> +
> +&mt6358codec {
> + mediatek,dmic-mode = <1>; /* one-wire */
> +};
> +
> +&touchscreen {
> + status = "disabled";
> +};
> +
> +&qca_wifi {
> + qcom,ath10k-calibration-variant = "GO_CERISE";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cerise.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cerise.dtsi
> new file mode 100644
> index 000000000000..087a0ef33e13
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cerise.dtsi
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2021 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8183-kukui-jacuzzi.dtsi"
> +
> +&cpu_thermal {
> + sustainable-power = <4500>; /* milliwatts */
> +};
> +
> +&mmc1_pins_uhs {
> + pins-clk {
> + drive-strength = <MTK_DRIVE_6mA>;
> + };
> +};
> +
> +&i2c2 {
> + i2c-scl-internal-delay-ns = <13200>;
> +};
It's really just a few lines, unless more than two devicetrees use those, I'm
more for just putting those in cerise.dts and stern.dts instead of having yet
another dtsi to walk through...
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-stern.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-stern.dts
> new file mode 100644
> index 000000000000..15e00feae3a9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-stern.dts
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2021 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8183-kukui-jacuzzi-cerise.dtsi"
> +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
> +
> +/ {
> + model = "Google stern board";
> + compatible = "google,cerise-sku1", "google,cerise", "mediatek,mt8183";
> +};
> +
> +&mt6358codec {
> + mediatek,dmic-mode = <0>; /* two-wire */
> +};
> +
> +&touchscreen {
You are referencing to the touchscreen@10 node from mt8183-kukui-jacuzzi.dtsi...
> + status = "okay";
...which is not disabled by default, so this property is useless, and
> +
> + compatible = "hid-over-i2c";
It's originally elan,ekth3500, you override it with hid-over-i2c, that's ok, but
> + reg = <0x10>;
the node already has this property....
> + interrupt-parent = <&pio>; > + interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
...and this one, actually even better, it's using interrupts-extended instead...
> + pinctrl-names = "default";
> + pinctrl-0 = <&touchscreen_pins>;
....and it's the same for this
> +
> + post-power-on-delay-ms = <10>;
> + hid-descr-addr = <0x0001>;
...but those two aren't present.
So you only need three properties in here :-)
> +};
> +
Apart from that, there's no google,cerise (nor the skus, of course) in the bindings
so please add those to arm/mediatek.yaml between Burnet and Cozmo; only then I will
be able to accept new board dts.
Thanks!
Angelo
Powered by blists - more mailing lists