[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240723195538.1133436-3-heiko@sntech.de>
Date: Tue, 23 Jul 2024 21:55:26 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: heiko@...ech.de
Cc: ukleinek@...ian.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 02/14] arm64: dts: rockchip: enable second PCIe controller on the Qnap-TS433
The TS433 uses both pcie controllers for sata and the 2nd network
interface. Set the needed data-lanes in the pcie3 phy and enable
the second pcie controller, as well as remove the bifurcation comment.
Tested-by: Uwe Kleine-König <ukleinek@...ian.org>
Signed-off-by: Heiko Stuebner <heiko@...ech.de>
---
arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index 07b4f095d766a..9bf9c3b65ca31 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -78,17 +78,25 @@ rgmii_phy0: ethernet-phy@0 {
};
&pcie30phy {
+ data-lanes = <1 2>;
status = "okay";
};
/* Connected to a JMicron AHCI SATA controller */
&pcie3x1 {
- /* The downstream dts has: rockchip,bifurcation, XXX: find out what this is about */
reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
+/* Connected to the 2.5G NIC for the upper network jack */
+&pcie3x2 {
+ num-lanes = <1>;
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
--
2.39.2
Powered by blists - more mailing lists