[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240725043935.GF2317@thinkpad>
Date: Thu, 25 Jul 2024 10:09:35 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Jim Quinlan <james.quinlan@...adcom.com>
Cc: linux-pci@...r.kernel.org, Nicolas Saenz Julienne <nsaenz@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Cyril Brulebois <kibi@...ian.org>,
Stanimir Varbanov <svarbanov@...e.de>,
Krzysztof Kozlowski <krzk@...nel.org>,
bcm-kernel-feedback-list@...adcom.com, jim2101024@...il.com,
Florian Fainelli <florian.fainelli@...adcom.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" <linux-rpi-kernel@...ts.infradead.org>,
"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" <linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 05/12] PCI: brcmstb: Use swinit reset if available
On Tue, Jul 16, 2024 at 05:31:20PM -0400, Jim Quinlan wrote:
> The 7712 SOC adds a software init reset device for the PCIe HW.
> If found in the DT node, use it.
>
> Signed-off-by: Jim Quinlan <james.quinlan@...adcom.com>
> Reviewed-by: Stanimir Varbanov <svarbanov@...e.de>
> Reviewed-by: Florian Fainelli <florian.fainelli@...adcom.com>
> ---
> drivers/pci/controller/pcie-brcmstb.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 92816d8d215a..4dc2ff7f3167 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -266,6 +266,7 @@ struct brcm_pcie {
> struct reset_control *rescal;
> struct reset_control *perst_reset;
> struct reset_control *bridge;
> + struct reset_control *swinit;
Same comment as previous patch.
> int num_memc;
> u64 memc_size[PCIE_BRCM_MAX_MEMC];
> u32 hw_rev;
> @@ -1633,12 +1634,27 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> if (IS_ERR(pcie->bridge))
> return PTR_ERR(pcie->bridge);
>
> + pcie->swinit = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit");
> + if (IS_ERR(pcie->swinit))
> + return PTR_ERR(pcie->swinit);
> +
> ret = clk_prepare_enable(pcie->clk);
> if (ret) {
> dev_err(&pdev->dev, "could not enable clock\n");
> return ret;
> }
>
> + ret = reset_control_assert(pcie->swinit);
> + if (ret) {
> + dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n");
> + goto clk_out;
> + }
No delay required?
- Mani
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists