[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <035601dade31$92374370$b6a5ca50$@samsung.com>
Date: Thu, 25 Jul 2024 10:25:44 +0900
From: "sunyeal.hong" <sunyeal.hong@...sung.com>
To: "'Krzysztof Kozlowski'" <krzk@...nel.org>, "'Sylwester Nawrocki'"
<s.nawrocki@...sung.com>, "'Chanwoo Choi'" <cw00.choi@...sung.com>, "'Alim
Akhtar'" <alim.akhtar@...sung.com>, "'Michael Turquette'"
<mturquette@...libre.com>, "'Stephen Boyd'" <sboyd@...nel.org>, "'Rob
Herring'" <robh@...nel.org>, "'Conor Dooley'" <conor+dt@...nel.org>
Cc: <linux-samsung-soc@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v4 1/4] dt-bindings: clock: add ExynosAuto v920 SoC CMU
bindings
Hello Krzysztof,
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@...nel.org>
> Sent: Wednesday, July 24, 2024 7:12 PM
> To: Sunyeal Hong <sunyeal.hong@...sung.com>; Sylwester Nawrocki
> <s.nawrocki@...sung.com>; Chanwoo Choi <cw00.choi@...sung.com>; Alim
> Akhtar <alim.akhtar@...sung.com>; Michael Turquette
> <mturquette@...libre.com>; Stephen Boyd <sboyd@...nel.org>; Rob Herring
> <robh@...nel.org>; Conor Dooley <conor+dt@...nel.org>
> Cc: linux-samsung-soc@...r.kernel.org; linux-clk@...r.kernel.org;
> devicetree@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-
> kernel@...r.kernel.org
> Subject: Re: [PATCH v4 1/4] dt-bindings: clock: add ExynosAuto v920 SoC
> CMU bindings
>
> On 23/07/2024 00:33, Sunyeal Hong wrote:
> > Add dt-schema for ExynosAuto v920 SoC clock controller.
> > Add device tree clock binding definitions for below CMU blocks.
> >
> > - CMU_TOP
> > - CMU_PERIC0
> >
> > Signed-off-by: Sunyeal Hong <sunyeal.hong@...sung.com>
> > ---
> > .../clock/samsung,exynosautov920-clock.yaml | 115 +++++++++++
> > .../clock/samsung,exynosautov920.h | 191 ++++++++++++++++++
> > 2 files changed, 306 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.y
> > aml create mode 100644
> > include/dt-bindings/clock/samsung,exynosautov920.h
> >
> > diff --git
> > a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock
> > .yaml
> > b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock
> > .yaml
> > new file mode 100644
> > index 000000000000..90f9f17da959
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-c
> > +++ lock.yaml
> > @@ -0,0 +1,115 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://protect2.fireeye.com/v1/url?k=79ef652b-1864700b-79eeee64-74fe
> > +485fb347-9d0b27f7b9bcf4cc&q=1&e=af4d44eb-4030-4020-8a28-394e2a873516&
> > +u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fclock%2Fsamsung%2Cexynosaut
> > +ov920-clock.yaml%23
> > +$schema:
> > +https://protect2.fireeye.com/v1/url?k=4f1f645c-2e94717c-4f1eef13-74fe
> > +485fb347-e7ad6ce5885cf0ba&q=1&e=af4d44eb-4030-4020-8a28-394e2a873516&
> > +u=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23
> > +
> > +title: Samsung ExynosAuto v920 SoC clock controller
> > +
> > +maintainers:
> > + - Sunyeal Hong <sunyeal.hong@...sung.com>
> > + - Chanwoo Choi <cw00.choi@...sung.com>
> > + - Krzysztof Kozlowski <krzk@...nel.org>
> > + - Sylwester Nawrocki <s.nawrocki@...sung.com>
> > +
> > +description: |
> > + ExynosAuto v920 clock controller is comprised of several CMU units,
> > +generating
> > + clocks for different domains. Those CMU units are modeled as
> > +separate device
> > + tree nodes, and might depend on each other. Root clocks in that
> > +clock tree are
> > + two external clocks:: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI
> (32768 Hz).
> > + The external OSCCLK must be defined as fixed-rate clock in dts.
> > +
> > + CMU_TOP is a top-level CMU, where all base clocks are prepared
> > + using PLLs and dividers; all other clocks of function blocks (other
> > + CMUs) are usually derived from CMU_TOP.
> > +
> > + Each clock is assigned an identifier and client nodes can use this
> > + identifier to specify the clock which they consume. All clocks
> > + available for usage in clock consumer nodes are defined as
> > + preprocessor macros in 'include/dt-
> bindings/clock/samsung,exynosautov920.h' header.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - samsung,exynosautov920-cmu-top
> > + - samsung,exynosautov920-cmu-peric0
> > +
> > + clocks:
> > + minItems: 1
> > + maxItems: 3
> > +
> > + clock-names:
> > + minItems: 1
> > + maxItems: 3
> > +
> > + "#clock-cells":
> > + const: 1
> > +
> > + reg:
> > + maxItems: 1
> > +
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: samsung,exynosautov920-cmu-top
> > +
> > + then:
> > + properties:
> > + clocks:
> > + items:
> > + - description: External reference clock (38.4 MHz)
> > +
> > + clock-names:
> > + items:
> > + - const: oscclk
> > +
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: samsung,exynosautov920-cmu-peric0
> > +
> > + then:
> > + properties:
> > + clocks:
> > + items:
> > + - description: External reference clock (38.4 MHz)
> > + - description: CMU_PERIC0 NOC clock (from CMU_TOP)
> > + - description: CMU_PERIC0 IP clock (from CMU_TOP)
> > +
> > + clock-names:
> > + items:
> > + - const: oscclk
> > + - const: noc
> > + - const: ip
> > +
> > +required:
> > + - compatible
> > + - "#clock-cells"
> > + - clocks
> > + - clock-names
> > + - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + # Clock controller node for CMU_PERIC0
> > + - |
> > + #include <dt-bindings/clock/samsung,exynosautov920.h>
> > +
> > + cmu_peric0: clock-controller@...00000 {
> > + compatible = "samsung,exynosautov920-cmu-peric0";
> > + reg = <0x10800000 0x8000>;
> > + #clock-cells = <1>;
> > +
> > + clocks = <&xtcxo>,
> > + <&cmu_top DOUT_CLKCMU_PERIC0_NOC>,
> > + <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
> > + clock-names = "oscclk",
> > + "noc",
> > + "ip";
> > + };
> > +
> > +...
> > diff --git a/include/dt-bindings/clock/samsung,exynosautov920.h
> > b/include/dt-bindings/clock/samsung,exynosautov920.h
> > new file mode 100644
> > index 000000000000..ad89728a4396
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/samsung,exynosautov920.h
> > @@ -0,0 +1,191 @@
> > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> > +/*
> > + * Copyright (c) 2024 Samsung Electronics Co., Ltd.
> > + * Author: Sunyeal Hong <sunyeal.hong@...sung.com>
> > + *
> > + * Device Tree binding constants for ExynosAuto v920 clock controller.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H
> > +#define _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H
> > +
> > +/* CMU_TOP */
> > +#define FOUT_SHARED0_PLL 1
> > +#define FOUT_SHARED1_PLL 2
> > +#define FOUT_SHARED2_PLL 3
> > +#define FOUT_SHARED3_PLL 4
> > +#define FOUT_SHARED4_PLL 5
> > +#define FOUT_SHARED5_PLL 6
> > +#define FOUT_MMC_PLL 7
> > +
> > +/* MUX in CMU_TOP */
> > +#define MOUT_SHARED0_PLL 101
>
> This is some odd numbering. Numbers start from 0 or 1 and are continuous.
>
Okay, I will update.
>
> Best regards,
> Krzysztof
Thanks,
Sunyeal Hong.
Powered by blists - more mailing lists