linux-kernel - [PATCH v2 01/11] arm64: dts: qcom: sm6115-pro1x: Add Hall Switch and Camera Button

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240725-qx1050-feature-expansion-v2-1-5fac4bbd946f@riseup.net>
Date: Thu, 25 Jul 2024 08:42:10 +0700
From: Dang Huynh <danct12@...eup.net>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht, 
 linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Dang Huynh <danct12@...eup.net>
Subject: [PATCH v2 01/11] arm64: dts: qcom: sm6115-pro1x: Add Hall Switch
 and Camera Button

The Pro1X has a flip keyboard and a single-state camera button.

Signed-off-by: Dang Huynh <danct12@...eup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 34 +++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 4a30024aa48f..3eecdc76bcac 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
- * Copyright (c) 2023, Dang Huynh <danct12@...eup.net>
+ * Copyright (c) 2023 - 2024, Dang Huynh <danct12@...eup.net>
  */
 
 /dts-v1/;
@@ -35,9 +35,25 @@ framebuffer0: framebuffer@...00000 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		pinctrl-0 = <&vol_up_n>;
+		pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>;
 		pinctrl-names = "default";
 
+		hall-switch {
+			label = "Hall Switch";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+			gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <90>;
+			wakeup-source;
+		};
+
+		key-camera {
+			label = "Camera Button";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+
 		key-volume-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
@@ -212,6 +228,20 @@ &sleep_clk {
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <14 4>;
+
+	hall_sensor_n: hall-sensor-n {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	key_camera_n: key-camera-n {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &ufs_mem_hc {

-- 
2.45.2