lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240725124753.890589-1-wangshuaijie@awinic.com>
Date: Thu, 25 Jul 2024 12:47:53 +0000
From: wangshuaijie@...nic.com
To: krzk@...nel.org
Cc: conor+dt@...nel.org,
	devicetree@...r.kernel.org,
	jic23@...nel.org,
	kangjiajun@...nic.com,
	krzk+dt@...nel.org,
	lars@...afoo.de,
	linux-iio@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	liweilei@...nic.com,
	robh@...nel.org,
	wangshuaijie@...nic.com,
	waqar.hameed@...s.com
Subject: Re: [PATCH V3 1/2] dt-bindings: iio: Add YAML to Awinic proximity sensor

Hi Krzysztof,

On Fri, 12 Jul 2024 13:55:09 +0200, krzk@...nel.org wrote:
>On 12/07/2024 13:31, wangshuaijie@...nic.com wrote:
>> From: shuaijie wang <wangshuaijie@...nic.com>
>> 
>> Add the awinic,aw96xxx.yaml file to adapt to the awinic proximity sensor driver.
>> Addressing the issues raised in the previous version.
>> 1. Add a description about the hardware device.
>> 2. Remove inappropriate configuration items.
>> 3. Modify the formatting issues.
>
>That's commit msg or changelog? Don't mix both. Read submitting patches.
>

The patch for v4 will fix these issues.

>> 
>> Signed-off-by: shuaijie wang <wangshuaijie@...nic.com>
>> ---
>>  .../iio/proximity/awinic,aw96xxx.yaml         | 127 ++++++++++++++++++
>>  1 file changed, 127 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml
>> new file mode 100644
>> index 000000000000..459cb1644d3c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96xxx.yaml
>> @@ -0,0 +1,127 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/input/awinic,aw96xxx.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Awinic's AW96XXX capacitive proximity sensor
>> +
>> +maintainers:
>> +  - Shuaijie Wang <wangshuaijie@...nic.com>
>> +
>> +description: |
>> +  Awinic's AW96XXX proximity sensor.
>> +  The specific absorption rate (SAR) is a metric that measures
>> +  the degree of absorption of electromagnetic radiation emitted by wireless
>> +  devices, such as mobile phones and tablets, by human tissue.
>> +  In mobile phone applications, the proximity sensor is primarily used to detect
>> +  the proximity of the human body to the phone. When the phone approaches the human body,
>> +  it will actively reduce the transmit power of the antenna to keep the SAR within a safe
>> +  range. Therefore, we also refer to the proximity sensor as a SAR sensor.
>
>Wrap at 80 (see Coding style).
>

The patch for v4 will fix these issues.

>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - awinic,aw96103
>> +      - awinic,aw96105
>> +      - awinic,aw96303
>> +      - awinic,aw96305
>> +      - awinic,aw96308
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    description:
>> +      Generated by the device to announce that a close/far
>> +      proximity event has happened.
>> +    maxItems: 1
>> +
>> +  awinic,sar-num:
>
>Drop the property. I already asked.
>

The patch for v4 will remove this property.

>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description:
>> +      Set the number of the SAR(Specific Absorption Rate) sensor.
>> +      It is set to 0 if one awinic sar chip is used.
>> +      If two awinic sar chips are used, awinic,sar-label in the first
>> +      awinic-sar should be set to 0 and awinic,sar-label in the second
>> +      awinic-sar should be set to 1.
>> +      In an application where a device utilizes multiple proximity sensors,
>> +      it is used to retrieve the names of the register configuration files
>> +      that the drivers need to load. For example: aw963xx_reg_0.bin/aw963xx_reg_1.bin
>> +
>> +  awinic,regulator-power-supply:
>
>It does not look like you tested the bindings, at least after quick
>look. Please run `make dt_binding_check` (see
>Documentation/devicetree/bindings/writing-schema.rst for instructions).
>Maybe you need to update your dtschema and yamllint.
>

The patch for v4 will fix these issues.

>> +    description:
>> +      Choose if you want to use a regulator to power the chip. Then the
>> +      vccX-supply has to be set.
>> +
>> +  vcc0-supply:
>> +    description:
>> +      Optional regulator for chip, 1.7V-3.6V.
>> +      If two awinic sar chips are used, the first regulator
>> +      should set the ID to vcc0-supply and the second regulator
>> +      should set the ID to vcc1-supply.
>> +
>> +  awinic,channel-use-mask:
>
>Aren't there existing IIO properties like this?

The patch for v4 will remove this property.

>
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description:
>> +      The mask of channels used.
>> +      Configure according to the specific chip channel used.
>> +      Bit[31:0] Each bit represents a channel.
>> +      If the customer uses ch0 and ch2, then channel_use_mask=<0x05>
>> +      For a 3-channel chip, the maximum value is 0x07;
>> +      For a 5-channel chip, the maximum value is 0x1F;
>> +      For a 8-channel chip, the maximum value is 0xFF;
>> +
>> +  awinic,monitor-esd:
>> +    type: boolean
>> +    description:
>> +      Choose if you want to monitor ESD.
>
>Why this is a choice? How does this describe hardware.
>

The patch for v4 will remove this property.

>> +
>> +  awinic,pin-set-inter-pull-up:
>> +    type: boolean
>> +    description:
>> +      Choose if you want to set the interrupt pin to internal pull-up.
>> +
>> +  awinic,using-pm-ops:
>
>NAK, drop all such OS policies.
>

The patch for v4 will remove this property.

>> +    type: boolean
>> +    description:
>> +      Choose if you want to change the chip mode on suppend and resume.
>> +
>> +  awinic,use-plug-cail:> +    type: boolean
>> +    description:
>> +      Choose If you want to perform calibration when plugging and unplugging the charger.
>
>And why this is board dependent?
>

The patch for v4 will remove this property.

>> +
>> +  awinic,irq-mux:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    enum: [2, 5]
>> +    description:
>> +      You only need to set this configuration item if you are using AW96308 adn AW96305BFOR.
>> +      If CS2 is used as the interrupt pin, this item should be set to 2.
>> +      If CS5 is used as the interrupt pin, this item should be set to 5.
>> +
>
>
>Best regards,
>Krzysztof

Thank you very much for your valuable advice. I will address these
issues in the next version of the patch.

Kind regards,
Wang Shuaijie

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ