| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZqO6YH-OTAFwWv_b@pluto>
Date: Fri, 26 Jul 2024 16:01:52 +0100
From: Cristian Marussi <cristian.marussi@....com>
To: Peng Fan <peng.fan@....com>
Cc: Cristian Marussi <cristian.marussi@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>,
"arm-scmi@...r.kernel.org" <arm-scmi@...r.kernel.org>,
"sudeep.holla@....com" <sudeep.holla@....com>,
"james.quinlan@...adcom.com" <james.quinlan@...adcom.com>,
"f.fainelli@...il.com" <f.fainelli@...il.com>,
"vincent.guittot@...aro.org" <vincent.guittot@...aro.org>,
"etienne.carriere@...com" <etienne.carriere@...com>,
"Peng Fan (OSS)" <peng.fan@....nxp.com>,
"michal.simek@....com" <michal.simek@....com>,
"quic_sibis@...cinc.com" <quic_sibis@...cinc.com>,
"quic_nkela@...cinc.com" <quic_nkela@...cinc.com>,
"ptosi@...gle.com" <ptosi@...gle.com>,
"dan.carpenter@...aro.org" <dan.carpenter@...aro.org>,
"souvik.chakravarty@....com" <souvik.chakravarty@....com>,
Etienne Carriere <etienne.carriere@...s.st.com>
Subject: Re: [PATCH v2 6/8] firmware: arm_scmi: Make OPTEE transport a
standalone driver
On Thu, Jul 11, 2024 at 12:57:46PM +0000, Peng Fan wrote:
> > Subject: [PATCH v2 6/8] firmware: arm_scmi: Make OPTEE transport a
> > standalone driver
> >
> > Make SCMI OPTEE transport a standalone driver that can be optionally
> > loaded as a module.
> >
> > CC: Etienne Carriere <etienne.carriere@...s.st.com>
> > Signed-off-by: Cristian Marussi <cristian.marussi@....com>
> > ---
> > v1 --> v2
> > - handle platform_driver_register() failures
> > ---
> > drivers/firmware/arm_scmi/Kconfig | 6 +-
> > drivers/firmware/arm_scmi/Makefile | 2 +-
> > drivers/firmware/arm_scmi/common.h | 3 -
> > drivers/firmware/arm_scmi/driver.c | 3 -
> > .../{optee.c => scmi_transport_optee.c} | 91 ++++++++++---------
> > 5 files changed, 52 insertions(+), 53 deletions(-) rename
> > drivers/firmware/arm_scmi/{optee.c => scmi_transport_optee.c} (90%)
> >
> > diff --git a/drivers/firmware/arm_scmi/Kconfig
> > b/drivers/firmware/arm_scmi/Kconfig
> > index a4d44ef8bf45..def7e3f09356 100644
> > --- a/drivers/firmware/arm_scmi/Kconfig
> > +++ b/drivers/firmware/arm_scmi/Kconfig
> > @@ -89,8 +89,8 @@ config ARM_SCMI_TRANSPORT_MAILBOX
> > will be called scmi_transport_mailbox.
> >
> > config ARM_SCMI_TRANSPORT_OPTEE
> > - bool "SCMI transport based on OP-TEE service"
> > - depends on OPTEE=y || OPTEE=ARM_SCMI_PROTOCOL
> > + tristate "SCMI transport based on OP-TEE service"
> > + depends on OPTEE
> > select ARM_SCMI_HAVE_TRANSPORT
> > select ARM_SCMI_HAVE_SHMEM
> > select ARM_SCMI_HAVE_MSG
> > @@ -100,6 +100,8 @@ config ARM_SCMI_TRANSPORT_OPTEE
> >
> > If you want the ARM SCMI PROTOCOL stack to include
> > support for a
> > transport based on OP-TEE SCMI service, answer Y.
> > + This driver can also be built as a module. If so, the module
> > + will be called scmi_transport_optee.
> >
> > config ARM_SCMI_TRANSPORT_SMC
> > tristate "SCMI transport based on SMC"
> > diff --git a/drivers/firmware/arm_scmi/Makefile
> > b/drivers/firmware/arm_scmi/Makefile
> > index 6868a47fa4ab..b04119ce972f 100644
> > --- a/drivers/firmware/arm_scmi/Makefile
> > +++ b/drivers/firmware/arm_scmi/Makefile
> > @@ -7,13 +7,13 @@ scmi-driver-
> > $(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT) += raw_mode.o
> > scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
> > scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
> > scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += virtio.o
> > -scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) += optee.o
> > scmi-protocols-y := base.o clock.o perf.o power.o reset.o sensors.o
> > system.o voltage.o powercap.o scmi-protocols-y += pinctrl.o scmi-
> > module-objs := $(scmi-driver-y) $(scmi-protocols-y) $(scmi-transport-y)
> >
> > obj-$(CONFIG_ARM_SCMI_TRANSPORT_SMC) +=
> > scmi_transport_smc.o
> > obj-$(CONFIG_ARM_SCMI_TRANSPORT_MAILBOX) +=
> > scmi_transport_mailbox.o
> > +obj-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) +=
> > scmi_transport_optee.o
> >
> > obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-core.o
> > obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o diff --git
> > a/drivers/firmware/arm_scmi/common.h
> > b/drivers/firmware/arm_scmi/common.h
> > index edb786cde25c..0ce1d804b3fc 100644
> > --- a/drivers/firmware/arm_scmi/common.h
> > +++ b/drivers/firmware/arm_scmi/common.h
> > @@ -289,9 +289,6 @@ int
> > scmi_xfer_raw_wait_for_message_response(struct scmi_chan_info
> > *cinfo, #ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO extern const
> > struct scmi_desc scmi_virtio_desc; #endif -#ifdef
> > CONFIG_ARM_SCMI_TRANSPORT_OPTEE -extern const struct
> > scmi_desc scmi_optee_desc; -#endif
> >
> > void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr,
> > void *priv);
> >
> > diff --git a/drivers/firmware/arm_scmi/driver.c
> > b/drivers/firmware/arm_scmi/driver.c
> > index b14c5326930a..67b416c7f2f5 100644
> > --- a/drivers/firmware/arm_scmi/driver.c
> > +++ b/drivers/firmware/arm_scmi/driver.c
> > @@ -3251,9 +3251,6 @@ ATTRIBUTE_GROUPS(versions);
> >
> > /* Each compatible listed below must have descriptor associated with
> > it */ static const struct of_device_id scmi_of_match[] = { -#ifdef
> > CONFIG_ARM_SCMI_TRANSPORT_OPTEE
> > - { .compatible = "linaro,scmi-optee", .data =
> > &scmi_optee_desc },
> > -#endif
> > #ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
> > { .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
> > #endif diff --git a/drivers/firmware/arm_scmi/optee.c
> > b/drivers/firmware/arm_scmi/scmi_transport_optee.c
> > similarity index 90%
> > rename from drivers/firmware/arm_scmi/optee.c rename to
> > drivers/firmware/arm_scmi/scmi_transport_optee.c
> > index 99f3b0bfb956..7a16c8d3e213 100644
> > --- a/drivers/firmware/arm_scmi/optee.c
> > +++ b/drivers/firmware/arm_scmi/scmi_transport_optee.c
> > @@ -1,6 +1,6 @@
> > // SPDX-License-Identifier: GPL-2.0
> > /*
> > - * Copyright (C) 2019-2021 Linaro Ltd.
> > + * Copyright (C) 2019-2024 Linaro Ltd.
>
> This should be kept unchanged?
Yes, as said, it will be fixed in V3.
Thanks,
Cristian
Powered by blists - more mailing lists