lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240726-s2r-cdns-v5-9-8664bfb032ac@bootlin.com>
Date: Fri, 26 Jul 2024 20:17:57 +0200
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, 
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Roger Quadros <rogerq@...nel.org>, 
 Peter Chen <peter.chen@...nel.org>, Pawel Laszczak <pawell@...ence.com>, 
 Mathias Nyman <mathias.nyman@...el.com>, Nishanth Menon <nm@...com>, 
 Vignesh Raghavendra <vigneshr@...com>, Tero Kristo <kristo@...nel.org>
Cc: linux-usb@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, 
 Kevin Hilman <khilman@...nel.org>, 
 Grégory Clement <gregory.clement@...tlin.com>, 
 Thomas Petazzoni <thomas.petazzoni@...tlin.com>, 
 Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH v5 09/12] xhci: introduce xhci->lost_power flag

The XHCI_RESET_ON_RESUME quirk allows wrappers to signal that they
expect a reset after resume. It is also used by some to enforce a XHCI
reset on resume (see needs-reset-on-resume DT prop).

Some wrappers are unsure beforehands if they will reset. Add a mechanism
to signal *at resume* if power has been lost. Parent devices can set
this flag, that defaults to the XHCI_RESET_ON_RESUME value.

The XHCI_RESET_ON_RESUME quirk still triggers a runtime_pm_get() on the
controller. This is required as we do not know if a suspend will
trigger a reset, so the best guess is to avoid runtime PM.

Reset the xhci->lost_power value each time in xhci_resume(), making it
safe for devices to only set lost_power on some resumes.

Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
 drivers/usb/host/xhci.c | 8 +++++++-
 drivers/usb/host/xhci.h | 6 ++++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0a8cf6c17f82..2c9b32d339f9 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1029,9 +1029,12 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 
 	spin_lock_irq(&xhci->lock);
 
-	if (hibernated || xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend)
+	if (hibernated || xhci->lost_power || xhci->broken_suspend)
 		reinit_xhc = true;
 
+	/* Reset to default value, parent devices might correct it at next resume. */
+	xhci->lost_power = !!(xhci->quirks & XHCI_RESET_ON_RESUME);
+
 	if (!reinit_xhc) {
 		/*
 		 * Some controllers might lose power during suspend, so wait
@@ -5228,6 +5231,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 	if (get_quirks)
 		get_quirks(dev, xhci);
 
+	/* Default value, that can be corrected at resume. */
+	xhci->lost_power = !!(xhci->quirks & XHCI_RESET_ON_RESUME);
+
 	/* In xhci controllers which follow xhci 1.0 spec gives a spurious
 	 * success event after a short transfer. This quirk will ignore such
 	 * spurious event.
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ebd0afd59a60..ec7c6061363f 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1640,6 +1640,12 @@ struct xhci_hcd {
 	unsigned		broken_suspend:1;
 	/* Indicates that omitting hcd is supported if root hub has no ports */
 	unsigned		allow_single_roothub:1;
+	/*
+	 * Signal from upper stacks that we lost power during system-wide
+	 * suspend. Its default value is based on XHCI_RESET_ON_RESUME, meaning
+	 * it is safe for wrappers to not modify lost_power at resume.
+	 */
+	unsigned                lost_power:1;
 	/* cached extended protocol port capabilities */
 	struct xhci_port_cap	*port_caps;
 	unsigned int		num_port_caps;

-- 
2.45.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ