| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240728164621.16615ce6@jic23-huawei>
Date: Sun, 28 Jul 2024 16:46:21 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Vasileios Amoiridis <vassilisamir@...il.com>
Cc: lars@...afoo.de, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, andriy.shevchenko@...ux.intel.com,
ang.iglesiasg@...il.com, linus.walleij@...aro.org,
biju.das.jz@...renesas.com, javier.carrasco.cruz@...il.com,
semen.protsenko@...aro.org, 579lpy@...il.com, ak@...klinger.de,
linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/7] iio: pressure: bmp280: Use bulk read for
humidity calibration data
On Fri, 26 Jul 2024 01:10:33 +0200
Vasileios Amoiridis <vassilisamir@...il.com> wrote:
> Convert individual reads to a bulk read for the humidity calibration data.
>
> Signed-off-by: Vasileios Amoiridis <vassilisamir@...il.com>
One comment inline. Short version is move that complicated field start enum
next to the code so we don't need to say so much for it to make sense.
> ---
> drivers/iio/pressure/bmp280-core.c | 62 ++++++++++--------------------
> drivers/iio/pressure/bmp280.h | 6 +++
> 2 files changed, 27 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
> index 3deaa57bb3f5..d5e5eb22667a 100644
> --- a/drivers/iio/pressure/bmp280-core.c
> +++ b/drivers/iio/pressure/bmp280-core.c
> @@ -118,6 +118,12 @@ enum bmp580_odr {
> */
> enum { T1, T2, T3, P1, P2, P3, P4, P5, P6, P7, P8, P9 };
>
> +/*
> + * These enums are used for indexing into the array of humidity parameters
> + * for BME280.
I was thinking of a comment that also mentioned the overlap. Perhaps something like
...
Index of the byte containing the start of each humidity parameter. Some
parameters stretch across multiple bytes including into the start of the byte
where another humidity parameter begins. Unaligned be/le accesses are used
to allow fields to be extracted with FIELD_GET().
Or, just refer to the field layout being complex and to see
bme280_read_calib function.
Actually come to think of it, just move this enum down there so it
is local to the code and the usage is more obvious / comment less important.
> + */
> +enum { H2 = 0, H3 = 2, H4 = 3, H5 = 4, H6 = 6 };
> +
> enum {
> /* Temperature calib indexes */
> BMP380_T1 = 0,
> @@ -344,6 +350,7 @@ static int bme280_read_calib(struct bmp280_data *data)
> {
> struct bmp280_calib *calib = &data->calib.bmp280;
> struct device *dev = data->dev;
> + s16 h4_upper, h4_lower;
> unsigned int tmp;
> int ret;
>
> @@ -352,14 +359,6 @@ static int bme280_read_calib(struct bmp280_data *data)
> if (ret)
> return ret;
>
> - /*
> - * Read humidity calibration values.
> - * Due to some odd register addressing we cannot just
> - * do a big bulk read. Instead, we have to read each Hx
> - * value separately and sometimes do some bit shifting...
> - * Humidity data is only available on BME280.
> - */
> -
> ret = regmap_read(data->regmap, BME280_REG_COMP_H1, &tmp);
> if (ret) {
> dev_err(dev, "failed to read H1 comp value\n");
> @@ -368,43 +367,24 @@ static int bme280_read_calib(struct bmp280_data *data)
> calib->H1 = tmp;
>
> ret = regmap_bulk_read(data->regmap, BME280_REG_COMP_H2,
> - &data->le16, sizeof(data->le16));
> - if (ret) {
> - dev_err(dev, "failed to read H2 comp value\n");
> - return ret;
> - }
> - calib->H2 = sign_extend32(le16_to_cpu(data->le16), 15);
> -
> - ret = regmap_read(data->regmap, BME280_REG_COMP_H3, &tmp);
> - if (ret) {
> - dev_err(dev, "failed to read H3 comp value\n");
> - return ret;
> - }
> - calib->H3 = tmp;
> -
> - ret = regmap_bulk_read(data->regmap, BME280_REG_COMP_H4,
> - &data->be16, sizeof(data->be16));
> + data->bme280_humid_cal_buf,
> + sizeof(data->bme280_humid_cal_buf));
> if (ret) {
> - dev_err(dev, "failed to read H4 comp value\n");
> + dev_err(dev, "failed to read humidity calibration values\n");
> return ret;
> }
> - calib->H4 = sign_extend32(((be16_to_cpu(data->be16) >> 4) & 0xff0) |
> - (be16_to_cpu(data->be16) & 0xf), 11);
>
> - ret = regmap_bulk_read(data->regmap, BME280_REG_COMP_H5,
> - &data->le16, sizeof(data->le16));
> - if (ret) {
> - dev_err(dev, "failed to read H5 comp value\n");
> - return ret;
> - }
> - calib->H5 = sign_extend32(FIELD_GET(BME280_COMP_H5_MASK, le16_to_cpu(data->le16)), 11);
> -
> - ret = regmap_read(data->regmap, BME280_REG_COMP_H6, &tmp);
> - if (ret) {
> - dev_err(dev, "failed to read H6 comp value\n");
> - return ret;
> - }
> - calib->H6 = sign_extend32(tmp, 7);
> + calib->H2 = get_unaligned_le16(&data->bme280_humid_cal_buf[H2]);
> + calib->H3 = data->bme280_humid_cal_buf[H3];
> + h4_upper = FIELD_GET(BME280_COMP_H4_GET_MASK_UP,
> + get_unaligned_be16(&data->bme280_humid_cal_buf[H4]));
> + h4_upper = FIELD_PREP(BME280_COMP_H4_PREP_MASK_UP, h4_upper);
> + h4_lower = FIELD_GET(BME280_COMP_H4_MASK_LOW,
> + get_unaligned_be16(&data->bme280_humid_cal_buf[H4]));
> + calib->H4 = sign_extend32(h4_upper | h4_lower, 11);
> + calib->H5 = sign_extend32(FIELD_GET(BME280_COMP_H5_MASK,
> + get_unaligned_le16(&data->bme280_humid_cal_buf[H5])), 11);
> + calib->H6 = data->bme280_humid_cal_buf[H6];
>
> return 0;
> }
> diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
> index ccacc67c1473..9bea0b84d2f4 100644
> --- a/drivers/iio/pressure/bmp280.h
> +++ b/drivers/iio/pressure/bmp280.h
> @@ -257,8 +257,13 @@
> #define BME280_REG_COMP_H5 0xE5
> #define BME280_REG_COMP_H6 0xE7
>
> +#define BME280_COMP_H4_GET_MASK_UP GENMASK(15, 8)
> +#define BME280_COMP_H4_PREP_MASK_UP GENMASK(11, 4)
> +#define BME280_COMP_H4_MASK_LOW GENMASK(3, 0)
> #define BME280_COMP_H5_MASK GENMASK(15, 4)
>
> +#define BME280_CONTIGUOUS_CALIB_REGS 7
> +
> #define BME280_OSRS_HUMIDITY_MASK GENMASK(2, 0)
> #define BME280_OSRS_HUMIDITY_SKIP 0
> #define BME280_OSRS_HUMIDITY_1X 1
> @@ -423,6 +428,7 @@ struct bmp280_data {
> /* Calibration data buffers */
> __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2];
> __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2];
> + u8 bme280_humid_cal_buf[BME280_CONTIGUOUS_CALIB_REGS];
> u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT];
> /* Miscellaneous, endianness-aware data buffers */
> __le16 le16;
Powered by blists - more mailing lists