| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240729-add-mtk-isp-3-0-support-v6-5-c374c9e0c672@baylibre.com>
Date: Mon, 29 Jul 2024 16:48:04 +0200
From: Julien Stephan <jstephan@...libre.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Andy Hsieh <andy.hsieh@...iatek.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, Julien Stephan <jstephan@...libre.com>
Subject: [PATCH v6 5/5] arm64: dts: mediatek: mt8365: Add support for
camera
Add base support for cameras for mt8365 platforms. This requires nodes
for the sensor interface, camsv, and CSI receivers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Signed-off-by: Julien Stephan <jstephan@...libre.com>
---
arch/arm64/boot/dts/mediatek/mt8365.dtsi | 125 +++++++++++++++++++++++++++++++
1 file changed, 125 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 24581f7410aa..cabdb51f4041 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mediatek,mt8365-power.h>
+#include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
/ {
compatible = "mediatek,mt8365";
@@ -703,6 +704,23 @@ ethernet: ethernet@...a0000 {
status = "disabled";
};
+ mipi_csi0: mipi-csi0@...10000 {
+ compatible = "mediatek,mt8365-csi-rx";
+ reg = <0 0x11c10000 0 0x2000>;
+ status = "disabled";
+ num-lanes = <4>;
+ #phy-cells = <1>;
+ };
+
+ mipi_csi1: mipi-csi1@...12000 {
+ compatible = "mediatek,mt8365-csi-rx";
+ reg = <0 0x11c12000 0 0x2000>;
+ phy-type = <PHY_TYPE_DPHY>;
+ status = "disabled";
+ num-lanes = <4>;
+ #phy-cells = <0>;
+ };
+
u3phy: t-phy@...c0000 {
compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
#address-cells = <1>;
@@ -773,6 +791,113 @@ larb2: larb@...01000 {
mediatek,larb-id = <2>;
};
+ seninf: seninf@...40000 {
+ compatible = "mediatek,mt8365-seninf";
+ reg = <0 0x15040000 0 0x6000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM_SENIF>,
+ <&topckgen CLK_TOP_SENIF_SEL>;
+ clock-names = "camsys", "top_mux";
+
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+
+ phys = <&mipi_csi0 PHY_TYPE_DPHY>, <&mipi_csi1>;
+ phy-names = "csi0", "csi1";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ seninf_camsv1_endpoint: endpoint {
+ remote-endpoint =
+ <&camsv1_endpoint>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ seninf_camsv2_endpoint: endpoint {
+ remote-endpoint =
+ <&camsv2_endpoint>;
+ };
+ };
+ };
+ };
+
+ camsv1: camsv@...50000 {
+ compatible = "mediatek,mt8365-camsv";
+ reg = <0 0x15050000 0 0x0040>,
+ <0 0x15050208 0 0x0020>,
+ <0 0x15050400 0 0x0100>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM>,
+ <&camsys CLK_CAMTG>,
+ <&camsys CLK_CAMSV0>;
+ clock-names = "cam", "camtg", "camsv";
+ iommus = <&iommu M4U_PORT_CAM_IMGO>;
+ mediatek,larb = <&larb2>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ camsv1_endpoint: endpoint {
+ remote-endpoint = <&seninf_camsv1_endpoint>;
+ };
+ };
+ };
+ };
+
+ camsv2: camsv@...50800 {
+ compatible = "mediatek,mt8365-camsv";
+ reg = <0 0x15050800 0 0x0040>,
+ <0 0x15050228 0 0x0020>,
+ <0 0x15050c00 0 0x0100>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM>,
+ <&camsys CLK_CAMTG>,
+ <&camsys CLK_CAMSV1>;
+ clock-names = "cam", "camtg", "camsv";
+ iommus = <&iommu M4U_PORT_CAM_IMGO>;
+ mediatek,larb = <&larb2>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ camsv2_endpoint: endpoint {
+ remote-endpoint = <&seninf_camsv2_endpoint>;
+ };
+ };
+ };
+ };
+
vdecsys: syscon@...00000 {
compatible = "mediatek,mt8365-vdecsys", "syscon";
reg = <0 0x16000000 0 0x1000>;
--
2.45.1
Powered by blists - more mailing lists