linux-kernel - [RESEND][PATCH v1 1/8] thermal: broadcom: Use thermal_zone_get_crit_temp() in bcm2835_thermal

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3322893.aeNJFYEL58@rjwysocki.net>
Date: Mon, 29 Jul 2024 17:53:59 +0200
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Linux PM <linux-pm@...r.kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>,
 LKML <linux-kernel@...r.kernel.org>, Lukasz Luba <lukasz.luba@....com>,
 Florian Fainelli <florian.fainelli@...adcom.com>,
 Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
 Ray Jui <rjui@...adcom.com>, Scott Branden <sbranden@...adcom.com>
Subject:
 [RESEND][PATCH v1 1/8] thermal: broadcom: Use thermal_zone_get_crit_temp() in
 bcm2835_thermal_probe()

From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>

Modify the bcm2835 thermal driver to use thermal_zone_get_crit_temp() in
bcm2835_thermal_probe() instead of relying on the assumption that the
critical trip index will always be 0.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
---
 drivers/thermal/broadcom/bcm2835_thermal.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Index: linux-pm/drivers/thermal/broadcom/bcm2835_thermal.c
===================================================================
--- linux-pm.orig/drivers/thermal/broadcom/bcm2835_thermal.c
+++ linux-pm/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -208,8 +208,7 @@ static int bcm2835_thermal_probe(struct
 	 */
 	val = readl(data->regs + BCM2835_TS_TSENSCTL);
 	if (!(val & BCM2835_TS_TSENSCTL_RSTB)) {
-		struct thermal_trip trip;
-		int offset, slope;
+		int offset, slope, crit_temp;

 		slope = thermal_zone_get_slope(tz);
 		offset = thermal_zone_get_offset(tz);
@@ -217,7 +216,7 @@ static int bcm2835_thermal_probe(struct
 		 * For now we deal only with critical, otherwise
 		 * would need to iterate
 		 */
-		err = thermal_zone_get_trip(tz, 0, &trip);
+		err = thermal_zone_get_crit_temp(tz, &crit_temp);
 		if (err < 0) {
 			dev_err(dev, "Not able to read trip_temp: %d\n", err);
 			return err;
@@ -232,7 +231,7 @@ static int bcm2835_thermal_probe(struct
 		val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT);

 		/*  trip_adc value from info */
-		val |= bcm2835_thermal_temp2adc(trip.temperature,
+		val |= bcm2835_thermal_temp2adc(crit_temp,
 						offset,
 						slope)
 			<< BCM2835_TS_TSENSCTL_THOLD_SHIFT;