[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240729-pci2_upstream-v8-7-b68ee5ef2b4d@nxp.com>
Date: Mon, 29 Jul 2024 16:18:14 -0400
From: Frank Li <Frank.Li@....com>
To: Richard Zhu <hongxing.zhu@....com>,
Lucas Stach <l.stach@...gutronix.de>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, NXP Linux Team <linux-imx@....com>,
Philipp Zabel <p.zabel@...gutronix.de>, Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-pci@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
bpf@...r.kernel.org, devicetree@...r.kernel.org,
Frank Li <Frank.Li@....com>
Subject: [PATCH v8 07/11] PCI: imx6: Improve comment for workaround
ERR010728
Improve comment about workaround ERR010728 by using official errata
document content(https://www.nxp.com/webapp/Download?colCode=IMX7DS_2N09P).
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Signed-off-by: Frank Li <Frank.Li@....com>
---
drivers/pci/controller/dwc/pci-imx6.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index e295c7bef732e..6be32a93411b6 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -712,9 +712,26 @@ static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
return 0;
/*
- * Workaround for ERR010728, failure of PCI-e PLL VCO to
- * oscillate, especially when cold. This turns off "Duty-cycle
- * Corrector" and other mysterious undocumented things.
+ * Workaround for ERR010728 (IMX7DS_2N09P, Rev. 1.1, 4/2023):
+ *
+ * PCIe: PLL may fail to lock under corner conditions.
+ *
+ * Initial VCO oscillation may fail under corner conditions such as
+ * cold temperature which will cause the PCIe PLL fail to lock in the
+ * initialization phase.
+ *
+ * The Duty-cycle Corrector calibration must be disabled.
+ *
+ * 1. De-assert the G_RST signal by clearing
+ * SRC_PCIEPHY_RCR[PCIEPHY_G_RST].
+ * 2. De-assert DCC_FB_EN by writing data “0x29” to the register
+ * address 0x306d0014 (PCIE_PHY_CMN_REG4).
+ * 3. Assert RX_EQS, RX_EQ_SEL by writing data “0x48” to the register
+ * address 0x306d0090 (PCIE_PHY_CMN_REG24).
+ * 4. Assert ATT_MODE by writing data “0xbc” to the register
+ * address 0x306d0098 (PCIE_PHY_CMN_REG26).
+ * 5. De-assert the CMN_RST signal by clearing register bit
+ * SRC_PCIEPHY_RCR[PCIEPHY_BTN]
*/
if (likely(imx_pcie->phy_base)) {
--
2.34.1
Powered by blists - more mailing lists