[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240729201843.142918-12-danila@jiaxyga.com>
Date: Mon, 29 Jul 2024 23:18:18 +0300
From: Danila Tikhonov <danila@...xyga.com>
To: robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
andersson@...nel.org,
konrad.dybcio@...aro.org,
rafael@...nel.org,
viresh.kumar@...aro.org,
heikki.krogerus@...ux.intel.com,
gregkh@...uxfoundation.org,
kees@...nel.org,
tony.luck@...el.com,
gpiccoli@...lia.com,
sudeep.holla@....com,
quic_rjendra@...cinc.com,
andre.przywara@....com,
ulf.hansson@...aro.org,
davidwronek@...il.com,
neil.armstrong@...aro.org,
heiko.stuebner@...rry.de,
rafal@...ecki.pl,
macromorgan@...mail.com,
linus.walleij@...aro.org,
dmitry.baryshkov@...aro.org,
johan+linaro@...nel.org,
javier.carrasco.cruz@...il.com,
quic_kriskura@...cinc.com,
lpieralisi@...nel.org,
fekz115@...il.com
Cc: devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org,
linux-pm@...r.kernel.org,
linux-usb@...r.kernel.org,
linux-hardening@...r.kernel.org,
linux@...nlining.org,
Danila Tikhonov <danila@...xyga.com>
Subject: [PATCH 11/11] arm64: dts: qcom: sm7325: Add device-tree for Nothing Phone 1
From: Eugene Lepshy <fekz115@...il.com>
Add device tree for the Nothing Phone 1 (nothing,spacewar) smartphone
which is based on the SM7325 SoC.
Supported features are, as of now:
* USB & UFS
* Debug UART
* Display via SimpleFB
* Power & volume buttons
* PMIC GLink
* Remoteprocs (ADSP, CDSP, MPSS, WPSS)
* WiFi & Bluetooth
* IPA
* VPU Iris (Venus)
* NFC
* Flash/torch LED
* RTC
* Device-specific thermals
* Various plumbing like regulators, i2c, spi, cci, etc
Signed-off-by: Eugene Lepshy <fekz115@...il.com>
Co-developed-by: Danila Tikhonov <danila@...xyga.com>
Signed-off-by: Danila Tikhonov <danila@...xyga.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sm7325-nothing-spacewar.dts | 1261 +++++++++++++++++
2 files changed, 1262 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0e5c810304fb..0226dde205ba 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -228,6 +228,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-curtana.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm7325-nothing-spacewar.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
new file mode 100644
index 000000000000..94b10ca1c299
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
@@ -0,0 +1,1261 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Eugene Lepshy <fekz115@...il.com>
+ * Copyright (c) 2024, Danila Tikhonov <danila@...xyga.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+#include "sm7325.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350b.dtsi" /* PM7325B */
+#include "pm8350c.dtsi" /* PM7350C */
+#include "pmk8350.dtsi" /* PMK7325 */
+
+/delete-node/ &rmtfs_mem;
+
+/ {
+ model = "Nothing Phone (1)";
+ compatible = "nothing,spacewar", "qcom,sm7325";
+ chassis-type = "handset";
+
+ qcom,msm-id = <QCOM_ID_SM7325 0x10000>;
+ qcom,board-id = <QCOM_BOARD_ID(QRD, 1, 0) 0>;
+
+ aliases {
+ bluetooth0 = &bluetooth;
+ serial0 = &uart5;
+ serial1 = &uart7;
+ wifi0 = &wifi;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "serial0:115200n8";
+
+ framebuffer0: framebuffer@...00000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>;
+ width = <1080>;
+ height = <2400>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&kypd_volp_n>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume up";
+ gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm7325-pmic-glink",
+ "qcom,pmic-glink";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_sbu: endpoint {
+ remote-endpoint = <&fsa4480_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops_mem: ramoops@...00000 {
+ compatible = "ramoops";
+ reg = <0x0 0x83a00000 0x0 0x400000>;
+ pmsg-size = <0x200000>;
+ mem-type = <2>;
+ console-size = <0x200000>;
+ };
+
+ cdsp_mem: cdsp@...00000 {
+ reg = <0x0 0x88f00000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ removed_mem: removed@...00000 {
+ reg = <0x0 0xc0000000 0x0 0x5100000>;
+ no-map;
+ };
+
+ cont_splash_mem: cont-splash@...00000 {
+ reg = <0x0 0xe1000000 0x0 (1080 * 2400 * 4)>;
+ no-map;
+ };
+
+ rmtfs_mem: rmtfs@...00000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0xf8500000 0x0 0x600000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>,
+ <QCOM_SCM_VMID_NAV>;
+ };
+ };
+
+ thermal-zones {
+ camera-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ chg-skin-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 6>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ conn-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 5>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ quiet-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ rear-cam-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 4>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ sdm-skin-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 3>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ xo-thermal {
+ polling-delay-passive = <0>;
+ thermal-sensors = <&pmk8350_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ // S2B is really ebi.lvl but it's there for supply map completeness sake.
+ vreg_s2b_0p7: smpa3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s2b_0p7";
+
+ regulator-min-microvolt = <65535>;
+ regulator-max-microvolt = <65535>;
+ regulator-always-on;
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+
+ vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p952>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-supply = <&vreg_s2b_0p7>;
+ vdd-l5-supply = <&vreg_s2b_0p7>;
+ vdd-l6-l9-l10-supply = <&vreg_s8b_1p256>;
+ vdd-l8-supply = <&vreg_s7b_0p952>;
+ vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p856>;
+ vdd-l13-supply = <&vreg_s7b_0p952>;
+ vdd-l14-l16-supply = <&vreg_s8b_1p256>;
+
+ /*
+ * S2, L4-L5 are ARCs:
+ * S2 - ebi.lvl,
+ * L4 - lmx.lvl,
+ * l5 - lcx.lvl.
+ *
+ * L10 are unused.
+ */
+
+ vdd19_pmu_rfa_i:
+ vreg_s1b_1p856: smps1 {
+ regulator-name = "vreg_s1b_1p856";
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vdd_pmu_aon_i:
+ vdd09_pmu_rfa_i:
+ vdd095_mx_pmu:
+ vdd095_pmu_1:
+ vdd095_pmu_2:
+ vreg_s7b_0p952: smps7 {
+ regulator-name = "vreg_s7b_0p952";
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vdd13_pmu_rfa_i:
+ vreg_s8b_1p256: smps8 {
+ regulator-name = "vreg_s8b_1p256";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+ };
+
+ vreg_l1b_0p912: ldo1 {
+ regulator-name = "vreg_l1b_0p912";
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_a_usbhs_3p1:
+ vreg_l2b_3p072: ldo2 {
+ regulator-name = "vreg_l2b_3p072";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_io_ebi0_1:
+ vdd_io_ebi0_2:
+ vdd_io_ebi0_3:
+ vdd_io_ebi0_4:
+ vdd_io_ebi1_1:
+ vdd_io_ebi1_2:
+ vdd_io_ebi1_3:
+ vdd_io_ebi1_4:
+ vreg_l3b_0p6: ldo3 {
+ regulator-name = "vreg_l3b_0p6";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <910000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_a_csi_01_1p2:
+ vdd_a_csi_23_1p2:
+ vdd_a_csi_4_1p2:
+ vdd_a_dsi_0_1p2:
+ vdd_a_qlink_0_1p2_ck:
+ vdd_a_qlink_1_1p2:
+ vdd_a_ufs_0_1p2:
+ vdd_vref_1p2_1:
+ vdd_vref_1p2_2:
+ vreg_l6b_1p2: ldo6 {
+ regulator-name = "vreg_l6b_1p2";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p96: ldo7 {
+ regulator-name = "vreg_l7b_2p96";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_0p904: ldo8 {
+ regulator-name = "vreg_l8b_0p904";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_px10:
+ vreg_l9b_1p2: ldo9 {
+ regulator-name = "vreg_l9b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddah_0:
+ vddah_1:
+ vddah_fbrx:
+ vddah_tx0:
+ vddah_tx0_1:
+ vddah_tx1:
+ vddah_tx1_1:
+ vreg_l11b_1p776: ldo11 {
+ regulator-name = "vreg_l11b_1p776";
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddal_dig0:
+ vddal_dig_1:
+ vddal_dig_2:
+ vddal_dig_xo:
+ vddal_gps_l1:
+ vddal_gps_l5:
+ vddal_icon:
+ vddal_rx:
+ vddal_rx0:
+ vddal_rx1:
+ vddal_rx2:
+ vddal_tx0:
+ vddal_tx0_1:
+ vddal_tx1:
+ vddal_tx1_2:
+ vreg_l12b_0p8: ldo12 {
+ regulator-name = "vreg_l12b_0p8";
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_cx1:
+ vdd_cx2:
+ vreg_l13b_0p8: ldo13 {
+ regulator-name = "vreg_l13b_0p8";
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_1p2:
+ vdd_lna:
+ vddam_fbrx:
+ vddam_rx_0:
+ vddam_rx_1:
+ vddam_rx0:
+ vddam_rx1:
+ vddam_rx2:
+ vddam_rxe_a:
+ vddam_rxe_b:
+ vddam_rxe_c:
+ vddam_rxe_d:
+ vddam_rxe_e:
+ vddam_tx0:
+ vddam_tx0_1:
+ vddam_tx1:
+ vddam_tx1_1:
+ vddam_xo:
+ vreg_l14b_1p2: ldo14 {
+ regulator-name = "vreg_l14b_1p2";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_mx:
+ vddmx_tx:
+ vdd_phy:
+ vreg_l15b_0p88: ldo15 {
+ regulator-name = "vreg_l15b_0p88";
+ regulator-min-microvolt = <765000>;
+ regulator-max-microvolt = <1020000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_1p2: ldo16 {
+ regulator-name = "vreg_l16b_1p2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_buck:
+ vreg_l17b_1p8: ldo17 {
+ regulator-name = "vreg_l17b_1p8";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_px_wcd9385:
+ vdd_txrx:
+ vdd_px0:
+ vdd_px3:
+ vdd_px7:
+ vreg_l18b_1p8: ldo18 {
+ regulator-name = "vreg_l18b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_1p8:
+ vdd_px_sdr735:
+ vdd_pxm:
+ vddio_px_1:
+ vddio_px_2:
+ vddio_px_3:
+ vdd18_io:
+ vddpx_ts:
+ vddpx_wl4otp:
+ vreg_l19b_1p8: ldo19 {
+ regulator-name = "vreg_l19b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l12-supply = <&vreg_s1b_1p856>;
+ vdd-l2-l8-supply = <&vreg_s1b_1p856>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&vreg_s7b_0p952>;
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ /*
+ * S2, S5, S7, S10 are ARCs:
+ * S2 - cx.lvl,
+ * S5 - mss.lvl,
+ * S7 - gfx.lvl,
+ * S10 - mx.lvl.
+ */
+
+ vdd22_wlbtpa_ch0:
+ vdd22_wlbtpa_ch1:
+ vdd22_wlbtppa_ch0:
+ vdd22_wlbtppa_ch1:
+ vdd22_wlpa5g_ch0:
+ vdd22_wlpa5g_ch1:
+ vdd22_wlppa5g_ch0:
+ vdd22_wlppa5g_ch1:
+ vreg_s1c_2p2: smps1 {
+ regulator-name = "vreg_s1c_2p2";
+ regulator-min-microvolt = <2190000>;
+ regulator-max-microvolt = <2210000>;
+ };
+
+ vdd_px1:
+ vreg_s9c_0p676: smps9 {
+ regulator-name = "vreg_s9c_0p676";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vdd_a_apc_cs_1p8:
+ vdd_a_cxo_1p8:
+ vdd_a_gfx_cs_1p8:
+ vdd_a_qrefs_1p8:
+ vdd_a_turing_q6_cs_1p8:
+ vdd_a_usbhs_1p8:
+ vdd_qfprom:
+ vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p8: ldo2 {
+ regulator-name = "vreg_l2c_1p8";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_ts:
+ vreg_l3c_3p0: ldo3 {
+ regulator-name = "vreg_l3c_3p0";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3540000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_px5:
+ vreg_l4c_1p8_3p0: ldo4 {
+ regulator-name = "vreg_l4c_1p8_3p0";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_px6:
+ vreg_l5c_1p8_3p0: ldo5 {
+ regulator-name = "vreg_l5c_1p8_3p0";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_px2:
+ vreg_l6c_2p96: ldo6 {
+ regulator-name = "vreg_l6c_2p96";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_sensor_3p3:
+ vreg_l7c_3p0: ldo7 {
+ regulator-name = "vreg_l7c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_sensor_1p8:
+ vreg_l8c_1p8: ldo8 {
+ regulator-name = "vreg_l8c_1p8";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_a_csi_01_0p9:
+ vdd_a_csi_23_0p9:
+ vdd_a_csi_4_0p9:
+ vdd_a_dsi_0_0p9:
+ vdd_a_dsi_0_pll_0p9:
+ vdd_a_gnss_0p9:
+ vdd_a_qlink_0_0p9:
+ vdd_a_qlink_0_0p9_ck:
+ vdd_a_qlink_1_0p9:
+ vdd_a_qlink_1_0p9_ck:
+ vdd_a_qrefs_0p875_1:
+ vdd_a_qrefs_0p875_2:
+ vdd_a_qrefs_0p875_3:
+ vdd_a_qrefs_0p875_4:
+ vdd_a_qrefs_0p875_5:
+ vdd_a_qrefs_0p875_6:
+ vdd_a_qrefs_0p875_7:
+ vdd_a_qrefs_0p875_8:
+ vdd_a_qrefs_0p875_9:
+ vdd_a_ufs_0_core:
+ vdd_a_usbhs_core:
+ vdd_vref_0p9:
+ vreg_l10c_0p88: ldo10 {
+ regulator-name = "vreg_l10c_0p88";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_fm:
+ vdd_wlan_fem:
+ vreg_l11c_2p8: ldo11 {
+ regulator-name = "vreg_l11c_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_io_oled:
+ vreg_l12c_1p8: ldo12 {
+ regulator-name = "vreg_l12c_1p8";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_oled:
+ vreg_l13c_3p0: ldo13 {
+ regulator-name = "vreg_l13c_3p0";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_flash:
+ vdd_mic_bias:
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+};
+
+&cci0 {
+ status = "okay";
+};
+
+&cci0_i2c0 {
+ /* sony,imx471 (Front) */
+};
+
+&cci1 {
+ status = "okay";
+};
+
+&cci1_i2c0 {
+ /* samsung,s5kjn1 (Rear-aux UW) */
+};
+
+&cci1_i2c1 {
+ /* sony,imx766 (Rear Wide) */
+};
+
+&gcc {
+ protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+ <GCC_MSS_CFG_AHB_CLK>,
+ <GCC_MSS_OFFLINE_AXI_CLK>,
+ <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+ <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+ <GCC_MSS_SNOC_AXI_CLK>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_SEC_CTRL_CLK_SRC>,
+ <GCC_WPSS_AHB_BDG_MST_CLK>,
+ <GCC_WPSS_AHB_CLK>,
+ <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/sm7325/nothing/spacewar/a660_zap.mbn";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ /* awinic,aw21018 (Glyph LED) @ 20 */
+
+ typec-mux@42 {
+ compatible = "fcs,fsa4480";
+ reg = <0x42>;
+
+ vcc-supply = <&vreg_bob>;
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ fsa4480_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_sbu>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ /* nxp,tfa9873 (EAR speaker codec) @ 34 */
+ /* nxp,tfa9873 (Main speaker codec) @ 35 */
+};
+
+&i2c9 {
+ clock-frequency = <1000000>;
+ status = "okay";
+
+ nfc@28 {
+ compatible = "nxp,nxp-nci-i2c";
+ reg = <0x28>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <41 IRQ_TYPE_NONE>;
+
+ enable-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&nfc_en>,
+ <&nfc_clk_req>,
+ <&nfc_dwl_req>,
+ <&nfc_int_req>;
+ pinctrl-names = "default";
+ };
+};
+
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/sm7325/nothing/spacewar/ipa_fws.mbn";
+
+ status = "okay";
+};
+
+/* MDSS remains disabled until the panel driver is present. */
+&mdss_dsi {
+ vdda-supply = <&vdd_a_dsi_0_1p2>;
+
+ /* Visionox RM692E5 panel */
+};
+
+&mdss_dsi_phy {
+ vdds-supply = <&vdd_a_dsi_0_0p9>;
+};
+
+&pm7325_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "PA_THERM3",
+ "PA_THERM4",
+ "NC",
+ "NC",
+ "KYPD_VOLP_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC"; /* GPIO_10 */
+
+ kypd_volp_n: kypd-volp-n-state {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-pull-up;
+ input-enable;
+ power-source = <1>;
+ };
+};
+
+&pm8350c_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>, <4>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1280000>;
+ };
+};
+
+&pmk8350_adc_tm {
+ status = "okay";
+
+ /* PMK8350 */
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ /* PM7325 */
+ quiet-therm@1 {
+ reg = <1>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ cam-flash-therm@2 {
+ reg = <2>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ sdm-skin-therm@3 {
+ reg = <3>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ wide-rfc-therm@4 {
+ reg = <4>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ /* PM8350B */
+ usb-conn-therm@5 {
+ reg = <5>;
+ io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ chg-skin-therm@6 {
+ reg = <6>;
+ io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pmk8350_rtc {
+ status = "okay";
+};
+
+&pmk8350_vadc {
+ /* PMK8350 */
+ channel@44 {
+ reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmk8350_xo_therm";
+ };
+
+ /* PM7325 */
+ channel@144 {
+ reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_quiet_therm";
+ };
+
+ channel@145 {
+ reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_cam_flash_therm";
+ };
+
+ channel@146 {
+ reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_sdm_skin_therm";
+ };
+
+ channel@147 {
+ reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_wide_rfc_therm";
+ };
+
+ channel@14a {
+ reg = <PM7325_ADC7_GPIO1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_pa3_therm";
+ };
+
+ channel@14b {
+ reg = <PM7325_ADC7_GPIO2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_pa4_therm";
+ };
+
+ /* PM8350B */
+ channel@344 {
+ reg = <PM8350B_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350b_batt_therm";
+ };
+
+ channel@347 {
+ reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350b_usb_conn_therm";
+ };
+
+ channel@34b {
+ reg = <PM8350B_ADC7_GPIO2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350b_chg_skin_therm";
+ };
+
+ channel@34c {
+ reg = <PM8350B_ADC7_GPIO3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350b_usb_therm2";
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&q6afedai {
+ dai@16 {
+ reg = <PRIMARY_MI2S_RX>;
+ qcom,sd-lines = <1>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+};
+
+&qfprom {
+ vcc-supply = <&vdd_qfprom>;
+};
+
+&qup_uart5_rx {
+ drive-strength = <2>;
+ bias-disable;
+};
+
+&qup_uart5_tx {
+ drive-strength = <2>;
+ bias-disable;
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm7325/nothing/spacewar/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm7325/nothing/spacewar/cdsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm7325/nothing/spacewar/modem.mbn";
+ status = "okay";
+};
+
+&remoteproc_wpss {
+ firmware-name = "qcom/sm7325/nothing/spacewar/wpss.mbn";
+ status = "okay";
+};
+
+&spi13 {
+ status = "okay";
+
+ /* focaltech,ft3680 (Touchscreen) @ 0 */
+};
+
+&tlmm {
+ /* 56-59: Fingerprint reader (SPI) */
+ gpio-reserved-ranges = <56 4>;
+
+ bt_uart_sleep_cts: bt-uart-sleep-cts-state {
+ pins = "gpio28";
+ function = "gpio";
+ bias-bus-hold;
+ };
+
+ bt_uart_sleep_rts: bt-uart-sleep-rts-state {
+ pins = "gpio29";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ bt_uart_sleep_txd: bt-uart-sleep-txd-state {
+ pins = "gpio30";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ bt_uart_sleep_rxd: bt-uart-sleep-rxd-state {
+ pins = "gpio31";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ nfc_en: nfc-en-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ nfc_clk_req: nfc-clk-req-state {
+ pins = "gpio39";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ nfc_dwl_req: nfc-dwl-req-state {
+ pins = "gpio40";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ nfc_int_req: nfc-int-req-state {
+ pins = "gpio41";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ hst_bt_en: hst-bt-en-state {
+ pins = "gpio85";
+ function = "gpio";
+ output-low;
+ bias-disable;
+ };
+
+ hst_sw_ctrl: hst-sw-ctrl-state {
+ pins = "gpio86";
+ function = "gpio";
+ bias-pull-down;
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart7 {
+ /delete-property/interrupts;
+ interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+ <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-1 = <&bt_uart_sleep_cts>,
+ <&bt_uart_sleep_rts>,
+ <&bt_uart_sleep_txd>,
+ <&bt_uart_sleep_rxd>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+
+ bluetooth: bluetooth {
+ compatible = "qcom,wcn6750-bt";
+
+ pinctrl-0 = <&hst_bt_en>,
+ <&hst_sw_ctrl>;
+ pinctrl-names = "default";
+
+ enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+ swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+
+ vddio-supply = <&vreg_l19b_1p8>;
+ vddaon-supply = <&vreg_s7b_0p952>;
+ vddbtcxmx-supply = <&vreg_s7b_0p952>;
+ vddrfacmn-supply = <&vreg_s7b_0p952>;
+ vddrfa0p8-supply = <&vreg_s7b_0p952>;
+ vddrfa1p7-supply = <&vdd19_pmu_rfa_i>;
+ vddrfa1p2-supply = <&vdd13_pmu_rfa_i>;
+ vddrfa2p2-supply = <&vreg_s1c_2p2>;
+ vddasd-supply = <&vreg_l11c_2p8>;
+ max-speed = <3200000>;
+
+ qcom,local-bd-address-broken;
+ };
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l7b_2p96>;
+ vcc-max-microamp = <800000>;
+ /*
+ * Technically l9b enables an eLDO (supplied by s1b) which then powers
+ * VCCQ2 of the UFS.
+ */
+ vccq-supply = <&vreg_l9b_1p2>;
+ vccq-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vdd_a_ufs_0_core>;
+ vdda-pll-supply = <&vdd_a_ufs_0_1p2>;
+ status = "okay";
+};
+
+&usb_1 {
+ /* USB 2.0 only */
+ qcom,select-utmi-as-pipe-clk;
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+ maximum-speed = "high-speed";
+ /* Remove USB3 phy */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vdd_a_usbhs_core>;
+ vdda18-supply = <&vdd_a_usbhs_1p8>;
+ vdda33-supply = <&vdd_a_usbhs_3p1>;
+ status = "okay";
+};
+
+&venus {
+ firmware-name = "qcom/sm7325/nothing/spacewar/vpu20_1v.mbn";
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+};
--
2.45.2
Powered by blists - more mailing lists