Message-ID: <ZqgVTPsB4puHtubZ@debian>
Date: Mon, 29 Jul 2024 15:18:52 -0700
From: Fan Ni <nifan.cxl@...il.com>
To: shiju.jose@...wei.com
Cc: linux-edac@...r.kernel.org, linux-cxl@...r.kernel.org,
	linux-acpi@...r.kernel.org, linux-mm@...ck.org,
	linux-kernel@...r.kernel.org, bp@...en8.de, tony.luck@...el.com,
	rafael@...nel.org, lenb@...nel.org, mchehab@...nel.org,
	dan.j.williams@...el.com, dave@...olabs.net,
	jonathan.cameron@...wei.com, dave.jiang@...el.com,
	alison.schofield@...el.com, vishal.l.verma@...el.com,
	ira.weiny@...el.com, david@...hat.com, Vilas.Sridharan@....com,
	leo.duran@....com, Yazen.Ghannam@....com, rientjes@...gle.com,
	jiaqiyan@...gle.com, Jon.Grimm@....com, dave.hansen@...ux.intel.com,
	naoya.horiguchi@....com, james.morse@....com, jthoughton@...gle.com,
	somasundaram.a@....com, erdemaktas@...gle.com, pgonda@...gle.com,
	duenwen@...gle.com, mike.malvestuto@...el.com, gthelen@...gle.com,
	wschwartz@...erecomputing.com, dferguson@...erecomputing.com,
	wbs@...amperecomputing.com, nifan.cxl@...il.com,
	tanxiaofei@...wei.com, prime.zeng@...ilicon.com,
	roberto.sassu@...wei.com, kangkang.shen@...urewei.com,
	wanghuiqiang@...wei.com, linuxarm@...wei.com
Subject: Re: [PATCH v10 11/11] ras: scrub: ACPI RAS2: Add memory ACPI RAS2
 driver

On Fri, Jul 26, 2024 at 05:05:55PM +0100, shiju.jose@...wei.com wrote:
> From: Shiju Jose <shiju.jose@...wei.com>
> 
> Memory ACPI RAS2 driver binds to the platform device add by the
s/add/added/
> ACPI RAS2 table parser.
> 
> Driver uses a PCC subspace for communicating with the ACPI compliant
> platform to provide control of memory scrub parameters to the userspace
> via the edac scrub.
> 
> Get the scrub attr descriptors from the EDAC scrub and register with EDAC
> RAS feature driver to expose sysfs scrub control attributes to the userspace.
> For example scrub control for the RAS2 memory device is exposed in
> /sys/bus/edac/devices/acpi_ras2_mem0/scrub/
> 
> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> Signed-off-by: Shiju Jose <shiju.jose@...wei.com>
> ---
>  Documentation/scrub/edac-scrub.rst |  41 +++
>  drivers/ras/Kconfig                |  10 +
>  drivers/ras/Makefile               |   1 +
>  drivers/ras/acpi_ras2.c            | 415 +++++++++++++++++++++++++++++
>  4 files changed, 467 insertions(+)
>  create mode 100644 drivers/ras/acpi_ras2.c
> 
> diff --git a/Documentation/scrub/edac-scrub.rst b/Documentation/scrub/edac-scrub.rst
> index 7815d674f496..348f98091ac1 100644
> --- a/Documentation/scrub/edac-scrub.rst
> +++ b/Documentation/scrub/edac-scrub.rst
> @@ -72,3 +72,44 @@ root@...alhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub/enable_background
>  root@...alhost:~# echo 0 > /sys/bus/edac/devices/cxl_region0/scrub/enable_background
>  root@...alhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub/enable_background
>  0
> +
> +2. RAS2
> +2.1 On demand scrubbing for a specific memory region.
> +root@...alhost:~# echo 0x120000 > /sys/bus/edac/devices/acpi_ras2_mem0/scrub/addr_range_base
> +root@...alhost:~# echo 0x150000 > /sys/bus/edac/devices/acpi_ras2_mem0/scrub/addr_range_size
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/min_cycle_duration
> +1
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/max_cycle_duration
> +24
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
> +10
> +root@...alhost:~# echo 15 > /sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
> +root@...alhost:~# echo 1 > /sys/bus/edac/devices/acpi_ras2_mem0/scrub/enable_on_demand
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/enable_on_demand
> +1
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
> +15
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/addr_range_base
> +0x120000
> +root@...alhost:~# cat //sys/bus/edac/devices/acpi_ras2_mem0/scrub/addr_range_size
> +0x150000
> +root@...alhost:~# echo 0 > /sys/bus/edac/devices/acpi_ras2_mem0/scrub/enable_on_demand
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/enable_on_demand
> +0
> +
> +2.2 Background scrubbing the entire memory
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/min_cycle_duration
> +1
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/max_cycle_duration
> +24
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
> +10
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/enable_background
> +0
> +root@...alhost:~# echo 3 > /sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
> +root@...alhost:~# echo 1 > /sys/bus/edac/devices/acpi_ras2_mem0/enable_background
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/enable_background
> +1
> +root@...alhost:~# cat /sys/bus/edac/devices/acpi_ras2_mem0/scrub/current_cycle_duration
> +3
> +root@...alhost:~# echo 0 > /sys/bus/edac/devices/acpi_ras2_mem0/enable_background
> diff --git a/drivers/ras/Kconfig b/drivers/ras/Kconfig
> index fc4f4bb94a4c..a2635017d80d 100644
> --- a/drivers/ras/Kconfig
> +++ b/drivers/ras/Kconfig
> @@ -46,4 +46,14 @@ config RAS_FMPM
>  	  Memory will be retired during boot time and run time depending on
>  	  platform-specific policies.
>  
> +config MEM_ACPI_RAS2
> +	tristate "Memory ACPI RAS2 driver"
> +	depends on ACPI_RAS2
> +	depends on EDAC
> +	help
> +	  The driver binds to the platform device added by the ACPI RAS2
> +	  table parser. Use a PCC channel subspace for communicating with
> +	  the ACPI compliant platform to provide control of memory scrub
> +	  parameters to the user via the edac scrub.
> +
>  endif
> diff --git a/drivers/ras/Makefile b/drivers/ras/Makefile
> index 11f95d59d397..a0e6e903d6b0 100644
> --- a/drivers/ras/Makefile
> +++ b/drivers/ras/Makefile
> @@ -2,6 +2,7 @@
>  obj-$(CONFIG_RAS)	+= ras.o
>  obj-$(CONFIG_DEBUG_FS)	+= debugfs.o
>  obj-$(CONFIG_RAS_CEC)	+= cec.o
> +obj-$(CONFIG_MEM_ACPI_RAS2)	+= acpi_ras2.o
>  
>  obj-$(CONFIG_RAS_FMPM)	+= amd/fmpm.o
>  obj-y			+= amd/atl/
> diff --git a/drivers/ras/acpi_ras2.c b/drivers/ras/acpi_ras2.c
> new file mode 100644
> index 000000000000..b2381d5b37d0
> --- /dev/null
> +++ b/drivers/ras/acpi_ras2.c
> @@ -0,0 +1,415 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * ACPI RAS2 memory driver
> + *
> + * Copyright (c) 2024 HiSilicon Limited.
> + *
> + */
> +
> +#define pr_fmt(fmt)	"MEMORY ACPI RAS2: " fmt
> +
> +#include <linux/edac_ras_feature.h>
> +#include <linux/platform_device.h>
> +#include <acpi/ras2_acpi.h>
> +
> +#define RAS2_DEV_NUM_RAS_FEATURES	1
> +
> +#define RAS2_SUPPORT_HW_PARTOL_SCRUB	BIT(0)
> +#define RAS2_TYPE_PATROL_SCRUB	0x0000
> +
> +#define RAS2_GET_PATROL_PARAMETERS	0x01
> +#define	RAS2_START_PATROL_SCRUBBER	0x02
> +#define	RAS2_STOP_PATROL_SCRUBBER	0x03
> +
> +#define RAS2_PATROL_SCRUB_SCHRS_IN_MASK	GENMASK(15, 8)
> +#define RAS2_PATROL_SCRUB_EN_BACKGROUND	BIT(0)
> +#define RAS2_PATROL_SCRUB_SCHRS_OUT_MASK	GENMASK(7, 0)
> +#define RAS2_PATROL_SCRUB_MIN_SCHRS_OUT_MASK	GENMASK(15, 8)
> +#define RAS2_PATROL_SCRUB_MAX_SCHRS_OUT_MASK	GENMASK(23, 16)
> +#define RAS2_PATROL_SCRUB_FLAG_SCRUBBER_RUNNING	BIT(0)
> +
> +#define RAS2_SCRUB_NAME_LEN      128
> +
> +struct acpi_ras2_ps_shared_mem {
> +	struct acpi_ras2_shared_memory common;
> +	struct acpi_ras2_patrol_scrub_parameter params;
> +};
> +
> +static int ras2_is_patrol_scrub_support(struct ras2_scrub_ctx *ras2_ctx)
> +{
> +	struct acpi_ras2_shared_memory __iomem *common = (void *)
> +				ras2_ctx->pcc_subspace->pcc_comm_addr;
> +
> +	guard(mutex)(&ras2_ctx->lock);
> +	common->set_capabilities[0] = 0;
> +
> +	return common->features[0] & RAS2_SUPPORT_HW_PARTOL_SCRUB;
> +}
> +
> +static int ras2_update_patrol_scrub_params_cache(struct ras2_scrub_ctx *ras2_ctx)
> +{
> +	struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
> +					ras2_ctx->pcc_subspace->pcc_comm_addr;
> +	int ret;
> +
> +	ps_sm->common.set_capabilities[0] = RAS2_SUPPORT_HW_PARTOL_SCRUB;
> +	ps_sm->params.patrol_scrub_command = RAS2_GET_PATROL_PARAMETERS;
> +
> +	ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
> +	if (ret) {
> +		dev_err(ras2_ctx->dev, "failed to read parameters\n");
> +		return ret;
> +	}
> +
> +	ras2_ctx->min_scrub_cycle = FIELD_GET(RAS2_PATROL_SCRUB_MIN_SCHRS_OUT_MASK,
> +					      ps_sm->params.scrub_params_out);
> +	ras2_ctx->max_scrub_cycle = FIELD_GET(RAS2_PATROL_SCRUB_MAX_SCHRS_OUT_MASK,
> +					      ps_sm->params.scrub_params_out);
> +	if (!ras2_ctx->bg) {
> +		ras2_ctx->base = ps_sm->params.actual_address_range[0];
> +		ras2_ctx->size = ps_sm->params.actual_address_range[1];
> +	}
> +	ras2_ctx->scrub_cycle_secs = FIELD_GET(RAS2_PATROL_SCRUB_SCHRS_OUT_MASK,
> +					       ps_sm->params.scrub_params_out);
> +
> +	return 0;
> +}
> +
> +/* Context - lock must be held */
> +static int ras2_get_patrol_scrub_running(struct ras2_scrub_ctx *ras2_ctx,
> +					 bool *running)
> +{
> +	struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
> +					ras2_ctx->pcc_subspace->pcc_comm_addr;
> +	int ret;
> +
> +	ps_sm->common.set_capabilities[0] = RAS2_SUPPORT_HW_PARTOL_SCRUB;
> +	ps_sm->params.patrol_scrub_command = RAS2_GET_PATROL_PARAMETERS;
> +
> +	ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
> +	if (ret) {
> +		dev_err(ras2_ctx->dev, "failed to read parameters\n");
> +		return ret;
> +	}
> +
> +	*running = ps_sm->params.flags & RAS2_PATROL_SCRUB_FLAG_SCRUBBER_RUNNING;
> +
> +	return 0;
> +}
> +
> +static int ras2_hw_scrub_read_min_scrub_cycle(struct device *dev, void *drv_data,
> +					      u32 *min)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +
> +	*min = ras2_ctx->min_scrub_cycle;
> +
> +	return 0;
> +}
> +
> +static int ras2_hw_scrub_read_max_scrub_cycle(struct device *dev, void *drv_data,
> +					      u32 *max)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +
> +	*max = ras2_ctx->max_scrub_cycle;
> +
> +	return 0;
> +}
> +
> +static int ras2_hw_scrub_cycle_read(struct device *dev, void *drv_data,
> +				    u32 *scrub_cycle_secs)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +
> +	*scrub_cycle_secs = ras2_ctx->scrub_cycle_secs;
> +
> +	return 0;
> +}
> +
> +static int ras2_hw_scrub_cycle_write(struct device *dev, void *drv_data,
> +				     u32 scrub_cycle_secs)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +	bool running;
> +	int ret;
> +
> +	guard(mutex)(&ras2_ctx->lock);
> +	ret = ras2_get_patrol_scrub_running(ras2_ctx, &running);
> +	if (ret)
> +		return ret;
> +
> +	if (running)
> +		return -EBUSY;
> +
> +	if (scrub_cycle_secs < ras2_ctx->min_scrub_cycle ||
> +	    scrub_cycle_secs > ras2_ctx->max_scrub_cycle)
> +		return -EINVAL;
> +
> +	ras2_ctx->scrub_cycle_secs = scrub_cycle_secs;
> +
> +	return 0;
> +}
> +
> +static int ras2_hw_scrub_read_range(struct device *dev, void *drv_data, u64 *base, u64 *size)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +
> +	/*
> +	 * When BG scrubbing is enabled the actual address range is not valid.
> +	 * Return -EBUSY now unless findout a method to retrieve actual full PA range.
> +	 */
> +	if (ras2_ctx->bg)
> +		return -EBUSY;
> +
> +	*base = ras2_ctx->base;
> +	*size = ras2_ctx->size;
> +
> +	return 0;
> +}
> +
> +static int ras2_hw_scrub_write_range(struct device *dev, void *drv_data, u64 base, u64 size)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +	bool running;
> +	int ret;
> +
> +	guard(mutex)(&ras2_ctx->lock);
> +	ret = ras2_get_patrol_scrub_running(ras2_ctx, &running);
> +	if (ret)
> +		return ret;
> +
> +	if (running)
> +		return -EBUSY;
> +
> +	if (!base || !size) {
> +		dev_warn(dev, "%s: Invalid address range, base=0x%llx size=0x%llx\n",
> +			 __func__, base, size);
> +		return -EINVAL;
> +	}
> +
> +	ras2_ctx->base = base;
> +	ras2_ctx->size = size;
> +
> +	return 0;
> +}
> +
> +static int ras2_hw_scrub_set_enabled_bg(struct device *dev, void *drv_data, bool enable)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +	struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
> +					ras2_ctx->pcc_subspace->pcc_comm_addr;
> +	bool enabled;
> +	int ret;
> +
> +	guard(mutex)(&ras2_ctx->lock);
> +	ps_sm->common.set_capabilities[0] = RAS2_SUPPORT_HW_PARTOL_SCRUB;
> +	ret = ras2_get_patrol_scrub_running(ras2_ctx, &enabled);
We have a passed-in argument "enable", we have another local variable
"enabled", will "running" be more accurate instead of "enabled"? The same as in
ras2_hw_scrub_set_enabled_od()

Fan
> +	if (ret)
> +		return ret;
> +	if (enable) {
> +		if (ras2_ctx->bg || enabled)
> +			return -EBUSY;
> +		ps_sm->params.requested_address_range[0] = 0;
> +		ps_sm->params.requested_address_range[1] = 0;
> +		ps_sm->params.scrub_params_in &= ~RAS2_PATROL_SCRUB_SCHRS_IN_MASK;
> +		ps_sm->params.scrub_params_in |= FIELD_PREP(RAS2_PATROL_SCRUB_SCHRS_IN_MASK,
> +							    ras2_ctx->scrub_cycle_secs);
> +		ps_sm->params.patrol_scrub_command = RAS2_START_PATROL_SCRUBBER;
> +	} else {
> +		if (!ras2_ctx->bg)
> +			return -EPERM;
> +		if (!ras2_ctx->bg && enabled)
> +			return -EBUSY;
> +		ps_sm->params.patrol_scrub_command = RAS2_STOP_PATROL_SCRUBBER;
> +	}
> +	ps_sm->params.scrub_params_in &= ~RAS2_PATROL_SCRUB_EN_BACKGROUND;
> +	ps_sm->params.scrub_params_in |= FIELD_PREP(RAS2_PATROL_SCRUB_EN_BACKGROUND,
> +						    enable);
> +	ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
> +	if (ret) {
> +		dev_err(ras2_ctx->dev, "%s: failed to enable(%d) background scrubbing\n",
> +			__func__, enable);

Similar suggestion as below.

> +		return ret;
> +	}
> +	if (enable) {
> +		ras2_ctx->bg = true;
> +		/* Update the cache to account for rounding of supplied parameters and similar */
> +		ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
> +	} else {
> +		ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
> +		ras2_ctx->bg = false;
> +	}
> +
> +	return ret;
> +}
> +
> +static int ras2_hw_scrub_get_enabled_bg(struct device *dev, void *drv_data, bool *enabled)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +
> +	*enabled = ras2_ctx->bg;
> +
> +	return 0;
> +}
> +
> +static int ras2_hw_scrub_set_enabled_od(struct device *dev, void *drv_data, bool enable)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +	struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
> +					ras2_ctx->pcc_subspace->pcc_comm_addr;
> +	bool enabled;
> +	int ret;
> +
> +	guard(mutex)(&ras2_ctx->lock);
> +	ps_sm->common.set_capabilities[0] = RAS2_SUPPORT_HW_PARTOL_SCRUB;
> +	if (ras2_ctx->bg)
> +		return -EBUSY;
> +	ret = ras2_get_patrol_scrub_running(ras2_ctx, &enabled);
> +	if (ret)
> +		return ret;
> +	if (enable) {
> +		if (!ras2_ctx->base || !ras2_ctx->size) {
> +			dev_warn(ras2_ctx->dev,
> +				 "%s: Invalid address range, base=0x%llx "
> +				 "size=0x%llx\n", __func__,
> +				 ras2_ctx->base, ras2_ctx->size);
> +			return -ERANGE;
> +		}
> +		if (enabled)
> +			return -EBUSY;
> +		ps_sm->params.scrub_params_in &= ~RAS2_PATROL_SCRUB_SCHRS_IN_MASK;
> +		ps_sm->params.scrub_params_in |= FIELD_PREP(RAS2_PATROL_SCRUB_SCHRS_IN_MASK,
> +							    ras2_ctx->scrub_cycle_secs);
> +		ps_sm->params.requested_address_range[0] = ras2_ctx->base;
> +		ps_sm->params.requested_address_range[1] = ras2_ctx->size;
> +		ps_sm->params.scrub_params_in &= ~RAS2_PATROL_SCRUB_EN_BACKGROUND;
> +		ps_sm->params.patrol_scrub_command = RAS2_START_PATROL_SCRUBBER;
> +	} else {
> +		if (!enabled)
> +			return 0;
> +		ps_sm->params.patrol_scrub_command = RAS2_STOP_PATROL_SCRUBBER;
> +	}
> +
> +	ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
> +	if (ret) {
> +		dev_err(ras2_ctx->dev, "failed to enable(%d) the demand scrubbing\n", enable);
Can we improve the messaging as below to make it clearer? 
        dev_err(ras2_ctx->dev, "failed to %s the demand scrubbing\n", enable ? "enable":"disable");

Fan
> +		return ret;
> +	}
> +
> +	return ras2_update_patrol_scrub_params_cache(ras2_ctx);
> +}
> +
> +static int ras2_hw_scrub_get_enabled_od(struct device *dev, void *drv_data, bool *enabled)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +
> +	guard(mutex)(&ras2_ctx->lock);
> +	if (ras2_ctx->bg) {
> +		*enabled = false;
> +		return 0;
> +	}
> +
> +	return ras2_get_patrol_scrub_running(ras2_ctx, enabled);
> +}
> +
> +static int ras2_hw_scrub_get_name(struct device *dev, void *drv_data, char *name)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = drv_data;
> +
> +	return sysfs_emit(name, "acpi_ras2_mem%d_scrub\n", ras2_ctx->id);
> +}
> +
> +static const struct edac_scrub_ops ras2_scrub_ops = {
> +	.read_range = ras2_hw_scrub_read_range,
> +	.write_range = ras2_hw_scrub_write_range,
> +	.get_enabled_bg = ras2_hw_scrub_get_enabled_bg,
> +	.set_enabled_bg = ras2_hw_scrub_set_enabled_bg,
> +	.get_enabled_od = ras2_hw_scrub_get_enabled_od,
> +	.set_enabled_od = ras2_hw_scrub_set_enabled_od,
> +	.get_name = ras2_hw_scrub_get_name,
> +	.min_cycle_read = ras2_hw_scrub_read_min_scrub_cycle,
> +	.max_cycle_read = ras2_hw_scrub_read_max_scrub_cycle,
> +	.cycle_duration_read = ras2_hw_scrub_cycle_read,
> +	.cycle_duration_write = ras2_hw_scrub_cycle_write,
> +};
> +
> +static DEFINE_IDA(ras2_ida);
> +
> +static void ida_release(void *ctx)
> +{
> +	struct ras2_scrub_ctx *ras2_ctx = ctx;
> +
> +	ida_free(&ras2_ida, ras2_ctx->id);
> +}
> +
> +static int ras2_probe(struct platform_device *pdev)
> +{
> +	struct edac_ras_feature ras_features[RAS2_DEV_NUM_RAS_FEATURES];
> +	char scrub_name[RAS2_SCRUB_NAME_LEN];
> +	struct ras2_scrub_ctx *ras2_ctx;
> +	int num_ras_features = 0;
> +	int ret, id;
> +
> +	/* RAS2 PCC Channel and Scrub specific context */
> +	ras2_ctx = devm_kzalloc(&pdev->dev, sizeof(*ras2_ctx), GFP_KERNEL);
> +	if (!ras2_ctx)
> +		return -ENOMEM;
> +
> +	ras2_ctx->dev = &pdev->dev;
> +	mutex_init(&ras2_ctx->lock);
> +
> +	ret = devm_ras2_register_pcc_channel(&pdev->dev, ras2_ctx,
> +					     *((int *)dev_get_platdata(&pdev->dev)));
> +	if (ret < 0) {
> +		dev_dbg(ras2_ctx->dev,
> +			"failed to register pcc channel ret=%d\n", ret);
> +		return ret;
> +	}
> +	if (!ras2_is_patrol_scrub_support(ras2_ctx))
> +		return -EOPNOTSUPP;
> +
> +	ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
> +	if (ret)
> +		return ret;
> +
> +	id = ida_alloc(&ras2_ida, GFP_KERNEL);
> +	if (id < 0)
> +		return id;
> +
> +	ras2_ctx->id = id;
> +
> +	ret = devm_add_action_or_reset(&pdev->dev, ida_release, ras2_ctx);
> +	if (ret < 0)
> +		return ret;
> +
> +	snprintf(scrub_name, sizeof(scrub_name), "acpi_ras2_mem%d",
> +		 ras2_ctx->id);
> +
> +	ras_features[num_ras_features].feat = RAS_FEAT_SCRUB;
> +	ras_features[num_ras_features].scrub_ops = &ras2_scrub_ops;
> +	ras_features[num_ras_features].scrub_ctx = ras2_ctx;
> +	num_ras_features++;
> +
> +	return edac_ras_dev_register(&pdev->dev, scrub_name, NULL,
> +				     num_ras_features, ras_features);
> +}
> +
> +static const struct platform_device_id ras2_id_table[] = {
> +	{ .name = "acpi_ras2", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(platform, ras2_id_table);
> +
> +static struct platform_driver ras2_driver = {
> +	.probe = ras2_probe,
> +	.driver = {
> +		.name = "acpi_ras2",
> +	},
> +	.id_table = ras2_id_table,
> +};
> +module_driver(ras2_driver, platform_driver_register, platform_driver_unregister);
> +
> +MODULE_IMPORT_NS(ACPI_RAS2);
> +MODULE_DESCRIPTION("ACPI RAS2 memory driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.34.1
> 

Powered by blists - more mailing lists