lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240729123538.175704-4-afd@ti.com>
Date: Mon, 29 Jul 2024 07:35:34 -0500
From: Andrew Davis <afd@...com>
To: Andre Przywara <andre.przywara@....com>,
        Russell King
	<linux@...linux.org.uk>, Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer
	<s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>, Andrew Lunn <andrew@...n.ch>,
        Sebastian
 Hesselbarth <sebastian.hesselbarth@...il.com>,
        Gregory Clement
	<gregory.clement@...tlin.com>,
        Daniel Mack <daniel@...que.org>,
        Haojian
 Zhuang <haojian.zhuang@...il.com>,
        Robert Jarzmik <robert.jarzmik@...e.fr>
CC: <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
        <imx@...ts.linux.dev>, Andrew Davis <afd@...com>
Subject: [PATCH v2 3/7] ARM: orion5x: Switch to new sys-off handler API

Kernel now supports chained power-off handlers. Use
register_platform_power_off() that registers a platform level power-off
handler. Legacy pm_power_off() will be removed once all drivers and archs
are converted to the new sys-off API.

Signed-off-by: Andrew Davis <afd@...com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
 arch/arm/mach-orion5x/board-mss2.c             | 2 +-
 arch/arm/mach-orion5x/dns323-setup.c           | 6 +++---
 arch/arm/mach-orion5x/kurobox_pro-setup.c      | 2 +-
 arch/arm/mach-orion5x/mv2120-setup.c           | 2 +-
 arch/arm/mach-orion5x/net2big-setup.c          | 2 +-
 arch/arm/mach-orion5x/terastation_pro2-setup.c | 2 +-
 arch/arm/mach-orion5x/ts209-setup.c            | 2 +-
 arch/arm/mach-orion5x/ts409-setup.c            | 2 +-
 8 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
index b0f16d223adf5..9e3d69891d2f6 100644
--- a/arch/arm/mach-orion5x/board-mss2.c
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -82,5 +82,5 @@ static void mss2_power_off(void)
 void __init mss2_init(void)
 {
 	/* register mss2 specific power-off method */
-	pm_power_off = mss2_power_off;
+	register_platform_power_off(mss2_power_off);
 }
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 062109efa0ecc..fcd38ff7ca459 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -700,7 +700,7 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323a_power_off;
+		register_platform_power_off(dns323a_power_off);
 		break;
 	case DNS323_REV_B1:
 		/* 5182 built-in SATA init */
@@ -717,7 +717,7 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323b_power_off;
+		register_platform_power_off(dns323b_power_off);
 		break;
 	case DNS323_REV_C1:
 		/* 5182 built-in SATA init */
@@ -727,7 +727,7 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323c_power_off;
+		register_platform_power_off(dns323c_power_off);
 
 		/* Now, -this- should theoretically be done by the sata_mv driver
 		 * once I figure out what's going on there. Maybe the behaviour
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index acba066180801..339b10891808f 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -373,7 +373,7 @@ static void __init kurobox_pro_init(void)
 	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
 
 	/* register Kurobox Pro specific power-off method */
-	pm_power_off = kurobox_pro_power_off;
+	register_platform_power_off(kurobox_pro_power_off);
 }
 
 #ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index b7327a6128353..5b0249f109cde 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -238,7 +238,7 @@ static void __init mv2120_init(void)
 	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
 		pr_err("mv2120: failed to setup power-off GPIO\n");
-	pm_power_off = mv2120_power_off;
+	register_platform_power_off(mv2120_power_off);
 }
 
 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 6ad9740b426b6..4afd9b4c71a94 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -423,7 +423,7 @@ static void __init net2big_init(void)
 
 	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
 	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = net2big_power_off;
+		register_platform_power_off(net2big_power_off);
 	else
 		pr_err("net2big: failed to configure power-off GPIO\n");
 
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 23a5521c68336..a9f01859d1012 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -349,7 +349,7 @@ static void __init tsp2_init(void)
 	i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
 
 	/* register Terastation Pro II specific power-off method */
-	pm_power_off = tsp2_power_off;
+	register_platform_power_off(tsp2_power_off);
 }
 
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index bab8ba0e01ab9..de9092e992c56 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -314,7 +314,7 @@ static void __init qnap_ts209_init(void)
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
 	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
+	register_platform_power_off(qnap_tsx09_power_off);
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 8131982c10d97..725688aa5cba7 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -312,7 +312,7 @@ static void __init qnap_ts409_init(void)
 	platform_device_register(&ts409_leds);
 
 	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
+	register_platform_power_off(qnap_tsx09_power_off);
 }
 
 MACHINE_START(TS409, "QNAP TS-409")
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ