Message-ID:
 <IA1PR20MB4953E47D7718F607342B6149BBB72@IA1PR20MB4953.namprd20.prod.outlook.com>
Date: Mon, 29 Jul 2024 10:25:31 +0800
From: Inochi Amaoto <inochiama@...look.com>
To: Jean Delvare <jdelvare@...e.com>,
	Guenter Roeck <linux@...ck-us.net>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Chen Wang <unicorn_wang@...look.com>,
	Inochi Amaoto <inochiama@...look.com>,
	Jonathan Corbet <corbet@....net>,
	Paul Walmsley <paul.walmsley@...ive.com>,
	Palmer Dabbelt <palmer@...belt.com>,
	Albert Ou <aou@...s.berkeley.edu>,
	Guo Ren <guoren@...nel.org>,
	Chao Wei <chao.wei@...hgo.com>,
	Jinyu Tang <tangjinyu@...ylab.org>,
	Drew Fustini <dfustini@...libre.com>,
	Sunil V L <sunilvl@...tanamicro.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
	Hal Feng <hal.feng@...rfivetech.com>
Cc: linux-hwmon@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-doc@...r.kernel.org,
	linux-riscv@...ts.infradead.org
Subject: [PATCH v7 2/4] drivers: hwmon: sophgo: Add SG2042 external hardware monitor support

SG2042 use an external MCU to provide basic hardware information
and thermal sensors.

Add driver support for the onboard MCU of SG2042.

Signed-off-by: Inochi Amaoto <inochiama@...look.com>
---
 Documentation/hwmon/index.rst      |   1 +
 Documentation/hwmon/sg2042-mcu.rst |  39 +++
 drivers/hwmon/Kconfig              |  11 +
 drivers/hwmon/Makefile             |   1 +
 drivers/hwmon/sg2042-mcu.c         | 399 +++++++++++++++++++++++++++++
 5 files changed, 451 insertions(+)
 create mode 100644 Documentation/hwmon/sg2042-mcu.rst
 create mode 100644 drivers/hwmon/sg2042-mcu.c

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 913c11390a45..ea3b5be8fe4f 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -206,6 +206,7 @@ Hardware Monitoring Kernel Drivers
    sch5636
    scpi-hwmon
    sfctemp
+   sg2042-mcu
    sht15
    sht21
    sht3x
diff --git a/Documentation/hwmon/sg2042-mcu.rst b/Documentation/hwmon/sg2042-mcu.rst
new file mode 100644
index 000000000000..250016b47dd1
--- /dev/null
+++ b/Documentation/hwmon/sg2042-mcu.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver sg2042-mcu
+=====================
+
+Supported chips:
+
+  * Onboard MCU for sg2042
+
+    Addresses scanned: -
+
+    Prefix: 'sg2042-mcu'
+
+Authors:
+
+  - Inochi Amaoto <inochiama@...look.com>
+
+Description
+-----------
+
+This driver supprts hardware monitoring for onboard MCU with
+i2c interface.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate
+the devices explicitly.
+Please see Documentation/i2c/instantiating-devices.rst for details.
+
+Sysfs Attributes
+----------------
+
+================= =============================================
+temp1_input       Measured temperature of SoC
+temp1_crit        Critical high temperature
+temp1_crit_hyst   hysteresis temperature restore from Critical
+temp2_input       Measured temperature of the base board
+================= =============================================
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index b60fe2e58ad6..7aa6c3f322e5 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2066,6 +2066,17 @@ config SENSORS_SFCTEMP
 	  This driver can also be built as a module.  If so, the module
 	  will be called sfctemp.

+config SENSORS_SG2042_MCU
+	tristate "Sophgo onboard MCU support"
+	depends on I2C
+	depends on ARCH_SOPHGO || COMPILE_TEST
+	help
+	  Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides
+	  power control and some basic information.
+
+	  This driver can be built as a module. If so, the module
+	  will be called sg2042-mcu.
+
 config SENSORS_SURFACE_FAN
 	tristate "Surface Fan Driver"
 	depends on SURFACE_AGGREGATOR
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b1c7056c37db..0bbe812a67ae 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -194,6 +194,7 @@ obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
 obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
 obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
 obj-$(CONFIG_SENSORS_SFCTEMP)	+= sfctemp.o
+obj-$(CONFIG_SENSORS_SG2042_MCU) += sg2042-mcu.o
 obj-$(CONFIG_SENSORS_SL28CPLD)	+= sl28cpld-hwmon.o
 obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
diff --git a/drivers/hwmon/sg2042-mcu.c b/drivers/hwmon/sg2042-mcu.c
new file mode 100644
index 000000000000..c8ecf5de1be3
--- /dev/null
+++ b/drivers/hwmon/sg2042-mcu.c
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 Inochi Amaoto <inochiama@...look.com>
+ *
+ * Sophgo power control mcu for SG2042
+ */
+
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+
+/* fixed MCU registers */
+#define REG_BOARD_TYPE				0x00
+#define REG_MCU_FIRMWARE_VERSION		0x01
+#define REG_PCB_VERSION				0x02
+#define REG_PWR_CTRL				0x03
+#define REG_SOC_TEMP				0x04
+#define REG_BOARD_TEMP				0x05
+#define REG_RST_COUNT				0x0a
+#define REG_UPTIME				0x0b
+#define REG_RESET_REASON			0x0d
+#define REG_MCU_TYPE				0x18
+#define REG_CRITICAL_ACTIONS			0x65
+#define REG_CRITICAL_TEMP			0x66
+#define REG_REPOWER_TEMP			0x67
+
+#define CRITICAL_ACTION_REBOOT			1
+#define CRITICAL_ACTION_POWEROFF		2
+
+#define MCU_POWER_MAX				0xff
+
+#define DEFINE_MCU_DEBUG_ATTR(_name, _reg, _format)			\
+	static int _name##_show(struct seq_file *seqf,			\
+				    void *unused)			\
+	{								\
+		struct sg2042_mcu_data *mcu = seqf->private;		\
+		int ret;						\
+		ret = i2c_smbus_read_byte_data(mcu->client, (_reg));	\
+		if (ret < 0)						\
+			return ret;					\
+		seq_printf(seqf, _format "\n", ret);			\
+		return 0;						\
+	}								\
+	DEFINE_SHOW_ATTRIBUTE(_name)					\
+
+struct sg2042_mcu_data {
+	struct i2c_client	*client;
+	struct dentry		*debugfs;
+	struct mutex		mutex;
+};
+
+static struct dentry *sgmcu_debugfs;
+
+static ssize_t reset_count_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(mcu->client, REG_RST_COUNT);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t uptime_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
+	u8 time_val[2];
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(mcu->client, REG_UPTIME,
+					    sizeof(time_val), time_val);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n",
+		       (int)(time_val[0]) + (int)(time_val[1] << 8));
+}
+
+static ssize_t reset_reason_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(mcu->client, REG_RESET_REASON);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "0x%02x\n", ret);
+}
+
+static ssize_t critical_action_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
+	int ret;
+	const char *action;
+
+	ret = i2c_smbus_read_byte_data(mcu->client, REG_CRITICAL_ACTIONS);
+	if (ret < 0)
+		return ret;
+
+	if (ret == CRITICAL_ACTION_REBOOT)
+		action = "reboot";
+	else if (ret == CRITICAL_ACTION_POWEROFF)
+		action = "poweroff";
+	else
+		action = "unknown";
+
+	return sprintf(buf, "%s\n", action);
+}
+
+static ssize_t critical_action_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
+	int value;
+
+	if (sysfs_streq("reboot", buf))
+		value = CRITICAL_ACTION_REBOOT;
+	else if (sysfs_streq("poweroff", buf))
+		value = CRITICAL_ACTION_POWEROFF;
+	else
+		return -EINVAL;
+
+	return i2c_smbus_write_byte_data(mcu->client,
+					 REG_CRITICAL_ACTIONS, value);
+}
+
+static DEVICE_ATTR_RO(reset_count);
+static DEVICE_ATTR_RO(uptime);
+static DEVICE_ATTR_RO(reset_reason);
+static DEVICE_ATTR_RW(critical_action);
+
+DEFINE_MCU_DEBUG_ATTR(firmware_version, REG_MCU_FIRMWARE_VERSION, "0x%02x");
+DEFINE_MCU_DEBUG_ATTR(pcb_version, REG_PCB_VERSION, "0x%02x");
+DEFINE_MCU_DEBUG_ATTR(board_type, REG_BOARD_TYPE, "0x%02x");
+DEFINE_MCU_DEBUG_ATTR(mcu_type, REG_MCU_TYPE, "%d");
+
+static struct attribute *sg2042_mcu_attrs[] = {
+	&dev_attr_reset_count.attr,
+	&dev_attr_uptime.attr,
+	&dev_attr_reset_reason.attr,
+	&dev_attr_critical_action.attr,
+	NULL
+};
+
+static const struct attribute_group sg2042_mcu_attr_group = {
+	.attrs	= sg2042_mcu_attrs,
+};
+
+static const struct attribute_group *sg2042_mcu_groups[] = {
+	&sg2042_mcu_attr_group,
+	NULL
+};
+
+static const struct hwmon_channel_info * const sg2042_mcu_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_CRIT |
+					HWMON_T_CRIT_HYST,
+				 HWMON_T_INPUT),
+	NULL
+};
+
+static int sg2042_mcu_read_temp(struct device *dev,
+				u32 attr, int channel,
+				long *val)
+{
+	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
+	int tmp;
+	u8 reg;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		reg = channel ? REG_BOARD_TEMP : REG_SOC_TEMP;
+		break;
+	case hwmon_temp_crit:
+		reg = REG_CRITICAL_TEMP;
+		break;
+	case hwmon_temp_crit_hyst:
+		reg = REG_REPOWER_TEMP;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	tmp = i2c_smbus_read_byte_data(mcu->client, reg);
+	if (tmp < 0)
+		return tmp;
+	*val = tmp * 1000;
+
+	return 0;
+}
+
+static int sg2042_mcu_read(struct device *dev,
+			   enum hwmon_sensor_types type,
+			   u32 attr, int channel, long *val)
+{
+	return sg2042_mcu_read_temp(dev, attr, channel, val);
+}
+
+static int sg2042_mcu_write(struct device *dev,
+			    enum hwmon_sensor_types type,
+			    u32 attr, int channel, long val)
+{
+	struct sg2042_mcu_data *mcu = dev_get_drvdata(dev);
+	int temp = val / 1000;
+	int hyst_temp, crit_temp;
+	int ret;
+	u8 reg;
+
+	if (temp > MCU_POWER_MAX)
+		temp = MCU_POWER_MAX;
+
+	mutex_lock(&mcu->mutex);
+
+	switch (attr) {
+	case hwmon_temp_crit:
+		hyst_temp = i2c_smbus_read_byte_data(mcu->client,
+						     REG_REPOWER_TEMP);
+		if (hyst_temp < 0) {
+			ret = -ENODEV;
+			goto failed;
+		}
+
+		crit_temp = temp;
+		reg = REG_CRITICAL_TEMP;
+		break;
+	case hwmon_temp_crit_hyst:
+		crit_temp = i2c_smbus_read_byte_data(mcu->client,
+						     REG_CRITICAL_TEMP);
+		if (crit_temp < 0) {
+			ret = -ENODEV;
+			goto failed;
+		}
+
+		hyst_temp = temp;
+		reg = REG_REPOWER_TEMP;
+		break;
+	default:
+		mutex_unlock(&mcu->mutex);
+		return -EOPNOTSUPP;
+	}
+
+	if (crit_temp < hyst_temp) {
+		ret = -EINVAL;
+		goto failed;
+	}
+
+	ret = i2c_smbus_write_byte_data(mcu->client, reg, temp);
+
+failed:
+	mutex_unlock(&mcu->mutex);
+	return ret;
+}
+
+static umode_t sg2042_mcu_is_visible(const void *_data,
+				     enum hwmon_sensor_types type,
+				     u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_input:
+			return 0444;
+		case hwmon_temp_crit:
+		case hwmon_temp_crit_hyst:
+			if (channel == 0)
+				return 0664;
+			break;
+		default:
+			return 0;
+		}
+		break;
+	default:
+		return 0;
+	}
+	return 0;
+}
+
+static const struct hwmon_ops sg2042_mcu_ops = {
+	.is_visible = sg2042_mcu_is_visible,
+	.read = sg2042_mcu_read,
+	.write = sg2042_mcu_write,
+};
+
+static const struct hwmon_chip_info sg2042_mcu_chip_info = {
+	.ops = &sg2042_mcu_ops,
+	.info = sg2042_mcu_info,
+};
+
+static void sg2042_mcu_debugfs_init(struct sg2042_mcu_data *mcu,
+				    struct device *dev)
+{
+	mcu->debugfs = debugfs_create_dir(dev_name(dev), sgmcu_debugfs);
+	if (mcu->debugfs) {
+		debugfs_create_file("firmware_version", 0444, mcu->debugfs,
+				    mcu, &firmware_version_fops);
+		debugfs_create_file("pcb_version", 0444, mcu->debugfs, mcu,
+				    &pcb_version_fops);
+		debugfs_create_file("mcu_type", 0444, mcu->debugfs, mcu,
+				    &mcu_type_fops);
+		debugfs_create_file("board_type", 0444, mcu->debugfs, mcu,
+				    &board_type_fops);
+	}
+}
+
+static int sg2042_mcu_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct sg2042_mcu_data *mcu;
+	struct device *hwmon_dev;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+						I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -EIO;
+
+	mcu = devm_kmalloc(dev, sizeof(*mcu), GFP_KERNEL);
+	if (!mcu)
+		return -ENOMEM;
+
+	mutex_init(&mcu->mutex);
+	mcu->client = client;
+
+	i2c_set_clientdata(client, mcu);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "sg2042_mcu",
+							 mcu,
+							 &sg2042_mcu_chip_info,
+							 NULL);
+	if (IS_ERR_OR_NULL(hwmon_dev))
+		return -EFAULT;
+
+	sg2042_mcu_debugfs_init(mcu, dev);
+
+	return 0;
+}
+
+static void sg2042_mcu_i2c_remove(struct i2c_client *client)
+{
+	struct sg2042_mcu_data *mcu = i2c_get_clientdata(client);
+
+	debugfs_remove_recursive(mcu->debugfs);
+}
+
+static const struct i2c_device_id sg2042_mcu_id[] = {
+	{ "sg2042-hwmon-mcu", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, sg2042_mcu_id);
+
+static const struct of_device_id sg2042_mcu_of_id[] = {
+	{ .compatible = "sophgo,sg2042-hwmon-mcu" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sg2042_mcu_of_id);
+
+static struct i2c_driver sg2042_mcu_driver = {
+	.driver = {
+		.name = "sg2042-mcu",
+		.of_match_table = sg2042_mcu_of_id,
+		.dev_groups = sg2042_mcu_groups,
+	},
+	.probe = sg2042_mcu_i2c_probe,
+	.remove = sg2042_mcu_i2c_remove,
+	.id_table = sg2042_mcu_id,
+};
+
+static int __init sg2042_mcu_init(void)
+{
+	sgmcu_debugfs = debugfs_create_dir("sg2042-mcu", NULL);
+	return i2c_add_driver(&sg2042_mcu_driver);
+}
+
+static void __exit sg2042_mcu_exit(void)
+{
+	debugfs_remove_recursive(sgmcu_debugfs);
+	i2c_del_driver(&sg2042_mcu_driver);
+}
+
+module_init(sg2042_mcu_init);
+module_exit(sg2042_mcu_exit);
+
+MODULE_AUTHOR("Inochi Amaoto <inochiama@...look.com>");
+MODULE_DESCRIPTION("MCU I2C driver for SG2042 soc platform");
+MODULE_LICENSE("GPL");
--
2.45.2

Powered by blists - more mailing lists