| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240730133318.1573765-8-cristian.marussi@arm.com>
Date: Tue, 30 Jul 2024 14:33:16 +0100
From: Cristian Marussi <cristian.marussi@....com>
To: linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
arm-scmi@...r.kernel.org
Cc: sudeep.holla@....com,
james.quinlan@...adcom.com,
f.fainelli@...il.com,
vincent.guittot@...aro.org,
etienne.carriere@...com,
peng.fan@....nxp.com,
michal.simek@....com,
quic_sibis@...cinc.com,
quic_nkela@...cinc.com,
ptosi@...gle.com,
dan.carpenter@...aro.org,
souvik.chakravarty@....com,
Cristian Marussi <cristian.marussi@....com>,
Etienne Carriere <etienne.carriere@...s.st.com>
Subject: [PATCH v3 7/9] firmware: arm_scmi: Make OPTEE transport a standalone driver
Make SCMI OPTEE transport a standalone driver that can be optionally
loaded as a module.
CC: Etienne Carriere <etienne.carriere@...s.st.com>
Signed-off-by: Cristian Marussi <cristian.marussi@....com>
---
v2 --> v3
- fixed spacing in Kconfig and Copyright
- fixed platform_driver_unregister call in .remove
(was called to late to work...)
- use new params in DEFINE_SCMI_TRANSPORT_DRIVER
v1 --> v2
- handle platform_driver_register() failures
---
drivers/firmware/arm_scmi/Kconfig | 6 +-
drivers/firmware/arm_scmi/Makefile | 2 +-
drivers/firmware/arm_scmi/common.h | 3 -
drivers/firmware/arm_scmi/driver.c | 3 -
.../{optee.c => scmi_transport_optee.c} | 90 ++++++++++---------
5 files changed, 52 insertions(+), 52 deletions(-)
rename drivers/firmware/arm_scmi/{optee.c => scmi_transport_optee.c} (91%)
diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig
index f634c5af1912..5186794b0505 100644
--- a/drivers/firmware/arm_scmi/Kconfig
+++ b/drivers/firmware/arm_scmi/Kconfig
@@ -89,8 +89,8 @@ config ARM_SCMI_TRANSPORT_MAILBOX
will be called scmi_transport_mailbox.
config ARM_SCMI_TRANSPORT_OPTEE
- bool "SCMI transport based on OP-TEE service"
- depends on OPTEE=y || OPTEE=ARM_SCMI_PROTOCOL
+ tristate "SCMI transport based on OP-TEE service"
+ depends on OPTEE
select ARM_SCMI_HAVE_TRANSPORT
select ARM_SCMI_HAVE_SHMEM
select ARM_SCMI_HAVE_MSG
@@ -100,6 +100,8 @@ config ARM_SCMI_TRANSPORT_OPTEE
If you want the ARM SCMI PROTOCOL stack to include support for a
transport based on OP-TEE SCMI service, answer Y.
+ This driver can also be built as a module. If so, the module
+ will be called scmi_transport_optee.
config ARM_SCMI_TRANSPORT_SMC
tristate "SCMI transport based on SMC"
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 6868a47fa4ab..b04119ce972f 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -7,13 +7,13 @@ scmi-driver-$(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT) += raw_mode.o
scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += virtio.o
-scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) += optee.o
scmi-protocols-y := base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o powercap.o
scmi-protocols-y += pinctrl.o
scmi-module-objs := $(scmi-driver-y) $(scmi-protocols-y) $(scmi-transport-y)
obj-$(CONFIG_ARM_SCMI_TRANSPORT_SMC) += scmi_transport_smc.o
obj-$(CONFIG_ARM_SCMI_TRANSPORT_MAILBOX) += scmi_transport_mailbox.o
+obj-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) += scmi_transport_optee.o
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-core.o
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index f44763bfec16..3ee775fca1d2 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -289,9 +289,6 @@ int scmi_xfer_raw_wait_for_message_response(struct scmi_chan_info *cinfo,
#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
extern const struct scmi_desc scmi_virtio_desc;
#endif
-#ifdef CONFIG_ARM_SCMI_TRANSPORT_OPTEE
-extern const struct scmi_desc scmi_optee_desc;
-#endif
void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index c4d0195f0fdb..e4fb1f75200f 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -3251,9 +3251,6 @@ ATTRIBUTE_GROUPS(versions);
/* Each compatible listed below must have descriptor associated with it */
static const struct of_device_id scmi_of_match[] = {
-#ifdef CONFIG_ARM_SCMI_TRANSPORT_OPTEE
- { .compatible = "linaro,scmi-optee", .data = &scmi_optee_desc },
-#endif
#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
{ .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
#endif
diff --git a/drivers/firmware/arm_scmi/optee.c b/drivers/firmware/arm_scmi/scmi_transport_optee.c
similarity index 91%
rename from drivers/firmware/arm_scmi/optee.c
rename to drivers/firmware/arm_scmi/scmi_transport_optee.c
index dae68adf6f9e..974128d73f2d 100644
--- a/drivers/firmware/arm_scmi/optee.c
+++ b/drivers/firmware/arm_scmi/scmi_transport_optee.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/tee_drv.h>
#include <linux/uuid.h>
@@ -148,12 +149,11 @@ struct scmi_optee_agent {
struct list_head channel_list;
};
+static struct scmi_transport_core_operations *core;
+
/* There can be only 1 SCMI service in OP-TEE we connect to */
static struct scmi_optee_agent *scmi_optee_private;
-/* Forward reference to scmi_optee transport initialization */
-static int scmi_optee_init(void);
-
/* Open a session toward SCMI OP-TEE service with REE_KERNEL identity */
static int open_session(struct scmi_optee_agent *agent, u32 *tee_session)
{
@@ -312,24 +312,6 @@ static int invoke_process_msg_channel(struct scmi_optee_channel *channel, size_t
return 0;
}
-static int scmi_optee_link_supplier(struct device *dev)
-{
- if (!scmi_optee_private) {
- if (scmi_optee_init())
- dev_dbg(dev, "Optee bus not yet ready\n");
-
- /* Wait for optee bus */
- return -EPROBE_DEFER;
- }
-
- if (!device_link_add(dev, scmi_optee_private->dev, DL_FLAG_AUTOREMOVE_CONSUMER)) {
- dev_err(dev, "Adding link to supplier optee device failed\n");
- return -ECANCELED;
- }
-
- return 0;
-}
-
static bool scmi_optee_chan_available(struct device_node *of_node, int idx)
{
u32 channel_id;
@@ -343,7 +325,7 @@ static void scmi_optee_clear_channel(struct scmi_chan_info *cinfo)
struct scmi_optee_channel *channel = cinfo->transport_info;
if (!channel->tee_shm)
- scmi_shmem_ops.clear_channel(channel->req.shmem);
+ core->shmem->clear_channel(channel->req.shmem);
}
static int setup_dynamic_shmem(struct device *dev, struct scmi_optee_channel *channel)
@@ -368,7 +350,7 @@ static int setup_dynamic_shmem(struct device *dev, struct scmi_optee_channel *ch
static int setup_static_shmem(struct device *dev, struct scmi_chan_info *cinfo,
struct scmi_optee_channel *channel)
{
- channel->req.shmem = scmi_shmem_ops.setup_iomap(cinfo, dev, true, NULL);
+ channel->req.shmem = core->shmem->setup_iomap(cinfo, dev, true, NULL);
if (IS_ERR(channel->req.shmem))
return PTR_ERR(channel->req.shmem);
@@ -479,10 +461,11 @@ static int scmi_optee_send_message(struct scmi_chan_info *cinfo,
mutex_lock(&channel->mu);
if (channel->tee_shm) {
- scmi_msg_ops.tx_prepare(channel->req.msg, xfer);
- ret = invoke_process_msg_channel(channel, scmi_msg_ops.command_size(xfer));
+ core->msg->tx_prepare(channel->req.msg, xfer);
+ ret = invoke_process_msg_channel(channel,
+ core->msg->command_size(xfer));
} else {
- scmi_shmem_ops.tx_prepare(channel->req.shmem, xfer, cinfo);
+ core->shmem->tx_prepare(channel->req.shmem, xfer, cinfo);
ret = invoke_process_smt_channel(channel);
}
@@ -498,9 +481,10 @@ static void scmi_optee_fetch_response(struct scmi_chan_info *cinfo,
struct scmi_optee_channel *channel = cinfo->transport_info;
if (channel->tee_shm)
- scmi_msg_ops.fetch_response(channel->req.msg, channel->rx_len, xfer);
+ core->msg->fetch_response(channel->req.msg,
+ channel->rx_len, xfer);
else
- scmi_shmem_ops.fetch_response(channel->req.shmem, xfer);
+ core->shmem->fetch_response(channel->req.shmem, xfer);
}
static void scmi_optee_mark_txdone(struct scmi_chan_info *cinfo, int ret,
@@ -512,7 +496,6 @@ static void scmi_optee_mark_txdone(struct scmi_chan_info *cinfo, int ret,
}
static struct scmi_transport_ops scmi_optee_ops = {
- .link_supplier = scmi_optee_link_supplier,
.chan_available = scmi_optee_chan_available,
.chan_setup = scmi_optee_chan_setup,
.chan_free = scmi_optee_chan_free,
@@ -527,6 +510,22 @@ static int scmi_optee_ctx_match(struct tee_ioctl_version_data *ver, const void *
return ver->impl_id == TEE_IMPL_ID_OPTEE;
}
+static const struct scmi_desc scmi_optee_desc = {
+ .ops = &scmi_optee_ops,
+ .max_rx_timeout_ms = 30,
+ .max_msg = 20,
+ .max_msg_size = SCMI_OPTEE_MAX_MSG_SIZE,
+ .sync_cmds_completed_on_ret = true,
+};
+
+static const struct of_device_id scmi_of_match[] = {
+ { .compatible = "linaro,scmi-optee" },
+ { /* Sentinel */ },
+};
+
+DEFINE_SCMI_TRANSPORT_DRIVER(scmi_optee, scmi_optee_driver, scmi_optee_desc,
+ scmi_of_match, core);
+
static int scmi_optee_service_probe(struct device *dev)
{
struct scmi_optee_agent *agent;
@@ -562,6 +561,12 @@ static int scmi_optee_service_probe(struct device *dev)
smp_mb();
scmi_optee_private = agent;
+ ret = platform_driver_register(&scmi_optee_driver);
+ if (ret) {
+ scmi_optee_private = NULL;
+ goto err;
+ }
+
return 0;
err:
@@ -577,6 +582,8 @@ static int scmi_optee_service_remove(struct device *dev)
if (!scmi_optee_private)
return -EINVAL;
+ platform_driver_unregister(&scmi_optee_driver);
+
if (!list_empty(&scmi_optee_private->channel_list))
return -EBUSY;
@@ -598,7 +605,7 @@ static const struct tee_client_device_id scmi_optee_service_id[] = {
MODULE_DEVICE_TABLE(tee, scmi_optee_service_id);
-static struct tee_client_driver scmi_optee_driver = {
+static struct tee_client_driver scmi_optee_service_driver = {
.id_table = scmi_optee_service_id,
.driver = {
.name = "scmi-optee",
@@ -608,22 +615,19 @@ static struct tee_client_driver scmi_optee_driver = {
},
};
-static int scmi_optee_init(void)
+static int __init scmi_transport_optee_init(void)
{
- return driver_register(&scmi_optee_driver.driver);
+ return driver_register(&scmi_optee_service_driver.driver);
}
+module_init(scmi_transport_optee_init);
-static void scmi_optee_exit(void)
+static void __exit scmi_transport_optee_exit(void)
{
- if (scmi_optee_private)
- driver_unregister(&scmi_optee_driver.driver);
+ driver_unregister(&scmi_optee_service_driver.driver);
}
+module_exit(scmi_transport_optee_exit);
-const struct scmi_desc scmi_optee_desc = {
- .transport_exit = scmi_optee_exit,
- .ops = &scmi_optee_ops,
- .max_rx_timeout_ms = 30,
- .max_msg = 20,
- .max_msg_size = SCMI_OPTEE_MAX_MSG_SIZE,
- .sync_cmds_completed_on_ret = true,
-};
+MODULE_ALIAS("scmi-transport-optee");
+MODULE_AUTHOR("Etienne Carriere <etienne.carriere@...s.st.com>");
+MODULE_DESCRIPTION("SCMI OPTEE Transport driver");
+MODULE_LICENSE("GPL");
--
2.45.2
Powered by blists - more mailing lists