linux-kernel - [PATCH net-next V3 0/4] Add support to PHYLINK for LAN743x/PCI11x1x chips

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240730140619.80650-1-Raju.Lakkaraju@microchip.com>
Date: Tue, 30 Jul 2024 19:36:15 +0530
From: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com>
To: <netdev@...r.kernel.org>
CC: <davem@...emloft.net>, <linux@...linux.org.uk>, <kuba@...nel.org>,
	<andrew@...n.ch>, <horms@...nel.org>, <hkallweit1@...il.com>,
	<richardcochran@...il.com>, <rdunlap@...radead.org>,
	<Bryan.Whitehead@...rochip.com>, <edumazet@...gle.com>, <pabeni@...hat.com>,
	<linux-kernel@...r.kernel.org>, <UNGLinuxDriver@...rochip.com>
Subject: [PATCH net-next V3 0/4] Add support to PHYLINK for LAN743x/PCI11x1x chips

This is the follow-up patch series of
https://lkml.iu.edu/hypermail/linux/kernel/2310.2/02078.html

Divide the PHYLINK adaptation and SFP modifications into two separate patch
series.

The current patch series focuses on transitioning the LAN743x driver's PHY
support from phylib to phylink.

Tested on chip PCI11010 Rev-B with Bridgeport Evaluation board Rev-1

Change List:
============
V2 -> V3:
  - Remove the unwanted parens in each of these if() sub-blocks 
  - Replace "to_net_dev(config->dev)" with "netdev".
  - Add GMII_ID/RGMII_TXID/RGMII_RXID in supported_interfaces
  - Fix the lan743x_phy_handle_exists( ) return type

V1 -> V2:
  - Fix the Russell King's comments i.e. remove the speed, duplex update in 
    lan743x_phylink_mac_config( )
  - pre-March 2020 legacy support has been removed

V0 -> V1:
  - Integrate with Synopsys DesignWare XPCS drivers
  - Based on external review comments,
  - Changes made to SGMII interface support only 1G/100M/10M bps speed
  - Changes made to 2500Base-X interface support only 2.5Gbps speed
  - Add check for not is_sgmii_en with is_sfp_support_en support
  - Change the "pci11x1x_strap_get_status" function return type from void to
    int
  - Add ethtool phylink wol, eee, pause get/set functions


Raju Lakkaraju (4):
  net: lan743x: Create separate PCS power reset function
  net: lan743x: Create separate Link Speed Duplex state function
  net: lan743x: Migrate phylib to phylink
  net: lan743x: Add support to ethtool phylink get and set settings

 drivers/net/ethernet/microchip/Kconfig        |   5 +-
 .../net/ethernet/microchip/lan743x_ethtool.c  | 118 +---
 drivers/net/ethernet/microchip/lan743x_main.c | 657 +++++++++++-------
 drivers/net/ethernet/microchip/lan743x_main.h |   7 +
 4 files changed, 460 insertions(+), 327 deletions(-)

-- 
2.34.1