| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240730164332.GA1501290-robh@kernel.org>
Date: Tue, 30 Jul 2024 10:43:32 -0600
From: Rob Herring <robh@...nel.org>
To: Inochi Amaoto <inochiama@...look.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Chen Wang <unicorn_wang@...look.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Jisheng Zhang <jszhang@...nel.org>, Guo Ren <guoren@...nel.org>,
Drew Fustini <dfustini@...libre.com>,
Haylen Chu <heylenay@...look.com>, Yixun Lan <dlan@...too.org>,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org
Subject: Re: [PATCH v3 1/7] dt-bindings: pinctrl: Add pinctrl for Sophgo
CV1800 series SoC.
On Mon, Jul 29, 2024 at 09:02:27AM +0800, Inochi Amaoto wrote:
> Add pinctrl support for Sophgo CV1800 series SoC.
>
> Signed-off-by: Inochi Amaoto <inochiama@...look.com>
> ---
> .../pinctrl/sophgo,cv1800-pinctrl.yaml | 120 +++++++++++++++++
> include/dt-bindings/pinctrl/pinctrl-cv1800b.h | 63 +++++++++
> include/dt-bindings/pinctrl/pinctrl-cv1812h.h | 127 ++++++++++++++++++
> include/dt-bindings/pinctrl/pinctrl-cv18xx.h | 19 +++
> include/dt-bindings/pinctrl/pinctrl-sg2000.h | 127 ++++++++++++++++++
> include/dt-bindings/pinctrl/pinctrl-sg2002.h | 79 +++++++++++
> 6 files changed, 535 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2000.h
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2002.h
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> new file mode 100644
> index 000000000000..a94ff6fb785e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> @@ -0,0 +1,120 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/sophgo,cv1800-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sophgo CV1800 Pin Controller
> +
> +maintainers:
> + - Inochi Amaoto <inochiama@...look.com>
> +
> +properties:
> + compatible:
> + enum:
> + - sophgo,cv1800b-pinctrl
> + - sophgo,cv1812h-pinctrl
> + - sophgo,sg2000-pinctrl
> + - sophgo,sg2002-pinctrl
> +
> + reg:
> + items:
> + - description: pinctrl for system domain
> + - description: pinctrl for rtc domain
> +
> + reg-names:
> + items:
> + - const: sys
> + - const: rtc
> +
> + resets:
> + maxItems: 1
> +
> +patternProperties:
> + '-cfg$':
> + type: object
> + description:
> + A pinctrl node should contain at least one subnode representing the
> + pinctrl groups available on the machine.
> +
> + additionalProperties: false
> +
> + patternProperties:
> + '-pins$':
> + type: object
> + description: |
> + Each subnode will list the pins it needs, and how they should
> + be configured, with regard to muxer configuration, bias, input
> + enable/disable, input schmitt trigger, slew-rate, drive strength
> + and bus hold state. In addition, all pins in the same subnode
> + should have the same power domain. For configuration detail,
> + refer to https://github.com/sophgo/sophgo-doc/.
> + $ref: /schemas/pinctrl/pincfg-node.yaml
> +
> + properties:
> + pinmux:
> + description: |
> + The list of GPIOs and their mux settings that properties in the
> + node apply to. This should be set using the GPIOMUX or GPIOMUX2
> + macro.
> +
> + bias-pull-up:
> + type: boolean
> +
> + bias-pull-down:
> + type: boolean
> +
> + drive-strength-microamp:
> + description: typical current when output high level.
> +
> + input-schmitt-microvolt:
> + description: typical threshold for schmitt trigger.
> +
> + power-source:
> + description: power supplies at X mV.
> + enum: [ 1800, 3300 ]
> +
> + slew-rate:
> + description: slew rate for output buffer (0 is fast, 1 is slow)
> + enum: [ 0, 1 ]
> +
> + bias-bus-hold:
> + type: boolean
Drop 'type'. It already has one defined.
> +
> + required:
> + - pinmux
> + - power-source
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
> +
> + pinctrl@...1000 {
> + compatible = "sophgo,cv1800b-pinctrl";
> + reg = <0x03001000 0x1000>,
> + <0x05027000 0x1000>;
> + reg-names = "sys", "rtc";
> +
> + uart0_cfg: uart0-cfg {
> + uart0-pins {
> + pinmux = <PINMUX(PIN_UART0_TX, 0)>,
> + <PINMUX(PIN_UART0_RX, 0)>;
> + bias-pull-up;
> + drive-strength-microamp = <10800>;
Mixed spaces and tabs.
With those fixed,
Reviewed-by: Rob Herring (Arm) <robh@...nel.org>
> + input-schmitt-microvolt = <0>;
> + power-source = <3300>;
> + slew-rate = <0>;
> + };
> + };
> + };
> +
> +...
Powered by blists - more mailing lists