| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZqlUh4kL0wK5BnnY@debian>
Date: Tue, 30 Jul 2024 14:00:55 -0700
From: Fan Ni <nifan.cxl@...il.com>
To: shiju.jose@...wei.com
Cc: linux-edac@...r.kernel.org, linux-cxl@...r.kernel.org,
linux-acpi@...r.kernel.org, linux-mm@...ck.org,
linux-kernel@...r.kernel.org, bp@...en8.de, tony.luck@...el.com,
rafael@...nel.org, lenb@...nel.org, mchehab@...nel.org,
dan.j.williams@...el.com, dave@...olabs.net,
jonathan.cameron@...wei.com, dave.jiang@...el.com,
alison.schofield@...el.com, vishal.l.verma@...el.com,
ira.weiny@...el.com, david@...hat.com, Vilas.Sridharan@....com,
leo.duran@....com, Yazen.Ghannam@....com, rientjes@...gle.com,
jiaqiyan@...gle.com, Jon.Grimm@....com, dave.hansen@...ux.intel.com,
naoya.horiguchi@....com, james.morse@....com, jthoughton@...gle.com,
somasundaram.a@....com, erdemaktas@...gle.com, pgonda@...gle.com,
duenwen@...gle.com, mike.malvestuto@...el.com, gthelen@...gle.com,
wschwartz@...erecomputing.com, dferguson@...erecomputing.com,
wbs@...amperecomputing.com, nifan.cxl@...il.com,
tanxiaofei@...wei.com, prime.zeng@...ilicon.com,
roberto.sassu@...wei.com, kangkang.shen@...urewei.com,
wanghuiqiang@...wei.com, linuxarm@...wei.com
Subject: Re: [PATCH v10 00/11] EDAC: Scrub: introduce generic EDAC RAS
control feature driver + CXL/ACPI-RAS2 drivers
On Fri, Jul 26, 2024 at 05:05:44PM +0100, shiju.jose@...wei.com wrote:
> From: Shiju Jose <shiju.jose@...wei.com>
>
Hi Shiju,
FYI. Not sure if I missed something, but I hit some issue when compiling
the patch set.
I tried to apply this patch set on top of fixes branch (tag:
cxl-fixes-6.10-rc7, origin/fixes), and compile, it fails with following
erors.
fan@DT ~/c/linux-fixes (fixes)> make -j 16
mkdir -p /home/fan/cxl/linux-fixes/tools/objtool && make O=/home/fan/cxl/linux-fixes subdir=tools/objtool --no-print-directory -C objtool
INSTALL libsubcmd_headers
CALL scripts/checksyscalls.sh
CC drivers/ras/acpi_ras2.o
drivers/ras/acpi_ras2.c: In function ‘ras2_update_patrol_scrub_params_cache’:
drivers/ras/acpi_ras2.c:64:37: error: implicit declaration of function ‘FIELD_GET’ [-Werror=implicit-function-declaration]
64 | ras2_ctx->min_scrub_cycle = FIELD_GET(RAS2_PATROL_SCRUB_MIN_SCHRS_OUT_MASK,
| ^~~~~~~~~
drivers/ras/acpi_ras2.c: In function ‘ras2_hw_scrub_set_enabled_bg’:
drivers/ras/acpi_ras2.c:216:50: error: implicit declaration of function ‘FIELD_PREP’ [-Werror=implicit-function-declaration]
216 | ps_sm->params.scrub_params_in |= FIELD_PREP(RAS2_PATROL_SCRUB_SCHRS_IN_MASK,
| ^~~~~~~~~~
cc1: all warnings being treated as errors
make[4]: *** [scripts/Makefile.build:244: drivers/ras/acpi_ras2.o] Error 1
make[3]: *** [scripts/Makefile.build:485: drivers/ras] Error 2
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/home/fan/cxl/linux-fixes/Makefile:1934: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
It seems we need to include "linux/bitfield.h". Fixed the compiling with
following change:
fan@DT ~/c/linux-fixes (fixes)> git diff
diff --git a/drivers/ras/acpi_ras2.c b/drivers/ras/acpi_ras2.c
index b2381d5b37d0..b4d229e6451f 100644
--- a/drivers/ras/acpi_ras2.c
+++ b/drivers/ras/acpi_ras2.c
@@ -11,6 +11,7 @@
#include <linux/edac_ras_feature.h>
#include <linux/platform_device.h>
#include <acpi/ras2_acpi.h>
+#include <linux/bitfield.h>
#define RAS2_DEV_NUM_RAS_FEATURES 1
Fan
> Previously known as "ras: scrub: introduce subsystem + CXL/ACPI-RAS2 drivers".
>
> EDAC based Subsystem for controlling RAS Features
> =================================================
> The proposed EDAC based subsystem for controlling RAS features and
> expose the feature's control attributes to the userspace in sysfs.
> Some Examples:
> - Scrub control
> - Error Check Scrub (ECS) control
> - ACPI RAS2 features
> - ACPI Address Range Scrubbing (ARS)
> - Post Package Repair (PPR) etc.
>
> High level design is illustrated in the following diagram.
>
> _______________________________________________
> | Userspace - Rasdaemon |
> | ____________ |
> | | RAS CXL | _____________ |
> | | Err Handler|----->| | |
> | |____________| | RAS Dynamic | |
> | ____________ | Scrub | |
> | | RAS Memory |----->| Controller | |
> | | Err Handler| |_____________| |
> | |____________| | |
> |__________________________|____________________|
> |
> |
> _______________________________|______________________________
> | Kernel EDAC based SubSystem | for RAS Features Control |
> | ______________________________|____________________________ |
> || EDAC Core Sysfs EDAC| Bus | |
> || __________________________|_______ _____________ | |
> || |/sys/bus/edac/devices/<dev>/scrub/| | EDAC Device | | |
> || |/sys/bus/edac/devices/<dev>/ecs*/ |<->| EDAC MC | | |
> || |/sys/bus/edac/devices/<dev>/ars/ | | EDAC Sysfs | | |
> || |/sys/bus/edac/devices/<dev>/ppr/ | | EDAC Module | | |
> || |__________________________________| |_____________| | |
> || | EDAC Bus | |
> || Get | | |
> || __________ Feature's | __________ | |
> || | |Descs _________|______ | | | |
> || |EDAC Scrub|<-----| EDAC RAS |---->| EDAC ARS | | |
> || |__________| |Control Feature | |__________| | |
> || __________ | Driver | __________ | |
> || | |<-----|________________|---->| | | |
> || |EDAC ECS | Register RAS | Features | EDAC PPR | | |
> || |__________| | |__________| | |
> || ______________________|___________________ | |
> ||_________|_____________|_____________|____________|________| |
> | _______|____ _____|______ ____|______ ___|_____ |
> | | | | CXL Mem | | | | | |
> | | ACPI RAS2 | | Driver | | ACPI ARS | | PPR | |
> | | Driver | | Scrub,ECS | | Driver | | Driver | |
> | |____________| |___________| |___________| |_________| |
> | | | | | |
> |________|______________|______________|___________|___________|
> | | | |
> _______|______________|______________|___________|___________
> | __|______________|_ ____________|___________|_____ |
> | | | |
> | | Platform HW and Firmware | |
> | |__________________________________________________| |
> |_____________________________________________________________|
>
> 1. EDAC Features components - Create feature specific descriptors.
> 2. EDAC RAS Feature driver - Get feature's attr descriptors from the
> EDAC RAS feature component and registers device's RAS features with
> EDAC bus and expose the feature's sysfs attributes under the sysfs
> EDAC bus.
> 3. RAS dynamic scrub controller - Userspace sample module added in the
> rasdaemon to start scrubbing when excess number of related errors
> are reported in a short span of time.
>
> The added EDAC feature specific components (e.g. EDAC scrub, EDAC ECS,
> EDAC PPR etc) do callbacks to the parent driver (e.g. CXL driver,
> ACPI RAS driver etc) for the controls rather than just letting the
> caller deal with it because of the following reasons.
> 1. Enforces a common API across multiple implementations can do that
> via review, but that's not generally gone well in the long run for
> subsystems that have done it (several have later moved to callback
> and feature list based approaches).
> 2. Gives a path for 'intercepting' in the EDAC feature driver.
> An example for this is that we could intercept PPR repair calls
> and sanity check that the memory in question is offline before
> passing back to the underlying code. Sure we could rely on doing
> that via some additional calls from the parent driver, but the
> ABI will get messier.
> 3. (Speculative) we may get in kernel users of some features in the
> long run.
>
> More details of the common RAS features are described in the following
> sections.
>
> Memory Scrubbing
> ================
> Increasing DRAM size and cost has made memory subsystem reliability
> an important concern. These modules are used where potentially
> corrupted data could cause expensive or fatal issues. Memory errors are
> one of the top hardware failures that cause server and workload crashes.
>
> Memory scrub is a feature where an ECC engine reads data from
> each memory media location, corrects with an ECC if necessary and
> writes the corrected data back to the same memory media location.
>
> The memory DIMMs could be scrubbed at a configurable rate to detect
> uncorrected memory errors and attempts to recover from detected memory
> errors providing the following benefits.
> - Proactively scrubbing memory DIMMs reduces the chance of a correctable
> error becoming uncorrectable.
> - Once detected, uncorrected errors caught in unallocated memory pages are
> isolated and prevented from being allocated to an application or the OS.
> - The probability of software/hardware products encountering memory
> errors is reduced.
> Some details of background can be found in Reference [5].
>
> There are 2 types of memory scrubbing,
> 1. Background (patrol) scrubbing of the RAM whilest the RAM is otherwise
> idle.
> 2. On-demand scrubbing for a specific address range/region of memory.
>
> There are several types of interfaces to HW memory scrubbers
> identified such as ACPI NVDIMM ARS(Address Range Scrub), CXL memory
> device patrol scrub, CXL DDR5 ECS, ACPI RAS2 memory scrubbing.
>
> The scrub control varies between different memory scrubbers. To allow
> for standard userspace tooling there is a need to present these controls
> with a standard ABI.
>
> Introduce generic memory EDAC scrub control which allows user to
> control underlying scrubbers in the system via generic sysfs scrub
> control interface.
>
> Use case of common scrub control feature
> ========================================
> 1. There are several types of interfaces to HW memory scrubbers identified
> such as ACPI NVDIMM ARS(Address Range Scrub), CXL memory device patrol
> scrub, CXL DDR5 ECS, ACPI RAS2 memory scrubbing features and software
> based memory scrubber(discussed in the community Reference [5]).
> Also some scrubbers support controlling (background) patrol scrubbing
> (ACPI RAS2, CXL) and/or on-demand scrubbing(ACPI RAS2, ACPI ARS).
> However the scrub controls varies between memory scrubbers. Thus there
> is a requirement for a standard generic sysfs scrub controls exposed
> to the userspace for the seamless control of the HW/SW scrubbers in
> the system by admin/scripts/tools etc.
> 2. Scrub controls in user space allow the user to disable the scrubbing
> in case disabling of the background patrol scrubbing or changing the
> scrub rate are needed for other purposes such as performance-aware
> operations which requires the background operations to be turned off
> or reduced.
> 3. Allows to perform on-demand scrubbing for specific address range if
> supported by the scrubber.
> 4. User space tools controls scrub the memory DIMMs regularly at a
> configurable scrub rate using the sysfs scrub controls discussed help,
> - to detect uncorrectable memory errors early before user accessing memory,
> which helps to recover the detected memory errors.
> - reduces the chance of a correctable error becoming uncorrectable.
> 5. Policy control for hotplugged memory. There is not necessarily a system
> wide bios or similar in the loop to control the scrub settings on a CXL
> device that wasn't there at boot. What that setting should be is a policy
> decision as we are trading of reliability vs performance - hence it should
> be in control of userspace. As such, 'an' interface is needed. Seems more
> sensible to try and unify it with other similar interfaces than spin
> yet another one.
>
> The draft version of userspace code for dynamic scrub control, based
> on frequency of memory errors reported to the userspace, is added in
> rasdaemon and enabled, tested for CXL device based patrol scrubbing feature
> and ACPI RAS2 based scrubbing feature.
>
> https://github.com/shijujose4/rasdaemon/tree/scrub_control_6_june_2024
>
> Comparison of scrubbing features
> ================================
> ................................................................
> . . ACPI . CXL patrol. CXL ECS . ARS .
> . Name . RAS2 . scrub . . .
> ................................................................
> . . . . . .
> . On-demand . Supported . No . No . Supported .
> . Scrubbing . . . . .
> . . . . . .
> ................................................................
> . . . . . .
> . Background . Supported . Supported . Supported . No .
> . scrubbing . . . . .
> . . . . . .
> ................................................................
> . . . . . .
> . Mode of . Scrub ctrl. per device. per memory. Unknown .
> . scrubbing . per NUMA . . media . .
> . . domain. . . . .
> ................................................................
> . . . . . .
> . Query scrub . Supported . Supported . Supported . Supported .
> . capabilities . . . . .
> . . . . . .
> ................................................................
> . . . . . .
> . Setting . Supported . No . No . Supported .
> . address range. . . . .
> . . . . . .
> ................................................................
> . . . . . .
> . Setting . Supported . Supported . No . No .
> . scrub rate . . . . .
> . . . . . .
> ................................................................
> . . . . . .
> . Unit for . Not . in hours . No . No .
> . scrub rate . Defined . . . .
> . . . . . .
> ................................................................
> . . Supported . . . .
> . Scrub . on-demand . No . No . Supported .
> . status/ . scrubbing . . . .
> . Completion . only . . . .
> ................................................................
> . UC error . .CXL general.CXL general. ACPI UCE .
> . reporting . Exception .media/DRAM .media/DRAM . notify and.
> . . .event/media.event/media. query .
> . . .scan? .scan? . ARS status.
> ................................................................
> . . . . . .
> . Clear UC . No . No . No . Supported .
> . error . . . . .
> . . . . . .
> ................................................................
> . . . . . .
> . Translate . No . No . No . Supported .
> . *(1)SPA to . . . . .
> . *(2)DPA . . . . .
> ................................................................
> . . . . . .
> . Error inject . No . Can inject. No . Supported .
> . . . poison for. . .
> . . . CXL . . .
> ................................................................
> *(1) - SPA - System Physical Address. See section 9.19.7.8
> Function Index 5 - Translate SPA of ACPI spec r6.5.
> *(2) - DPA - Device Physical Address. See section 9.19.7.8
> Function Index 5 - Translate SPA of ACPI spec r6.5.
>
> CXL Scrubbing features
> ======================
> Add support for control CXL patrol scrubber and ACPI RAS2 HW based memory
> patrol scrubber and register with the EDAC scrub to expose the scrub
> controls to the userspace tool.
>
> CXL spec r3.1 section 8.2.9.9.11.1 describes the memory device patrol scrub
> control feature. The device patrol scrub proactively locates and makes
> corrections to errors in regular cycle. The patrol scrub control allows the
> request to configure patrol scrubber's input configurations.
>
> The patrol scrub control allows the requester to specify the number of
> hours in which the patrol scrub cycles must be completed, provided that
> the requested number is not less than the minimum number of hours for the
> patrol scrub cycle that the device is capable of. In addition, the patrol
> scrub controls allow the host to disable and enable the feature in case
> disabling of the feature is needed for other purposes such as
> performance-aware operations which require the background operations to be
> turned off.
>
> The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
> Specification (JESD79-5) and allows the DRAM to internally read, correct
> single-bit errors, and write back corrected data bits to the DRAM array
> while providing transparency to error counts.
>
> The DDR5 device contains number of memory media FRUs per device. The
> DDR5 ECS feature and thus the ECS control driver supports configuring
> the ECS parameters per FRU.
>
> ACPI RAS2 Hardware-based Memory Scrubbing
> =========================================
> ACPI spec 6.5 section 5.2.21 ACPI RAS2 describes ACPI RAS2 table
> provides interfaces for platform RAS features and supports independent
> RAS controls and capabilities for a given RAS feature for multiple
> instances of the same component in a given system.
> Memory RAS features apply to RAS capabilities, controls and operations
> that are specific to memory. RAS2 PCC sub-spaces for memory-specific RAS
> features have a Feature Type of 0x00 (Memory).
>
> The platform can use the hardware-based memory scrubbing feature to expose
> controls and capabilities associated with hardware-based memory scrub
> engines. The RAS2 memory scrubbing feature supports following as per spec,
> - Independent memory scrubbing controls for each NUMA domain, identified
> using its proximity domain.
> Note: However AmpereComputing has single entry repeated as they have
> centralized controls.
> - Provision for background (patrol) scrubbing of the entire memory system,
> as well as on-demand scrubbing for a specific region of memory.
>
> ACPI Address Range Scrubbing(ARS)
> ================================
> ARS allows the platform to communicate memory errors to system software.
> This capability allows system software to prevent accesses to addresses
> with uncorrectable errors in memory. ARS functions manage all NVDIMMs
> present in the system. Only one scrub can be in progress system wide
> at any given time.
> Following functions are supported as per the specification.
> 1. Query ARS Capabilities for a given address range, indicates platform
> supports the ACPI NVDIMM Root Device Unconsumed Error Notification.
> 2. Start ARS triggers an Address Range Scrub for the given memory range.
> Address scrubbing can be done for volatile memory, persistent memory,
> or both.
> 3. Query ARS Status command allows software to get the status of ARS,
> including the progress of ARS and ARS error record.
> 4. Clear Uncorrectable Error.
> 5. Translate SPA
> 6. ARS Error Inject etc.
> Note: Support for ARS is not added in this series because to reduce the
> line of code for review and could be added after initial code is merged.
> We'd like feedback on whether this is of interest to ARS community?
>
> Series adds,
> 1. Generic EDAC RAS feature driver, EDAC scrub driver, EDAC ECS driver
> supports memory scrub control, ECS control and other RAS features
> in the system.
> 2. Support for CXL feature mailbox commands, which is used by
> CXL device scrubbing features.
> 3. CXL scrub driver supporting patrol scrub control (device and
> region based).
> 4. CXL ECS driver supporting ECS control feature.
> 5. ACPI RAS2 driver adds OS interface for RAS2 communication through
> PCC mailbox and extracts ACPI RAS2 feature table (RAS2) and
> create platform device for the RAS memory features, which binds
> to the memory ACPI RAS2 driver.
> 7. Memory ACPI RAS2 driver gets the PCC subspace for communicating
> with the ACPI compliant platform supports ACPI RAS2. Add callback
> functions and registers with EDAC scrub to support user to
> control the HW patrol scrubbers exposed to the kernel via the
> ACPI RAS2 table.
>
> The CXL specific scrub and ECS features are supported in
> https://gitlab.com/qemu-project/qemu.git
>
> Open Questions based on feedbacks from the community:
> 1. Leo: Standardize unit for scrub rate, for example ACPI RAS2 does not define
> unit for the scrub rate. RAS2 clarification needed.
> 2. Jonathan: Any need for discoverability of capability to scan different regions,
> such as global PA space to the userspace. Left as future extension.
> 3. Jiaqi:
> - STOP_PATROL_SCRUBBER from RAS2 must be blocked and, must not be exposed to
> OS/userspace. Stopping patrol scrubber is unacceptable for platform where
> OEM has enabled patrol scrubber, because the patrol scrubber is a key part
> of logging and is repurposed for other RAS actions.
> If the OEM does not want to expose this control, they should lock it down so the
> interface is not exposed to the OS. These features are optional afterall.
> - "Requested Address Range"/"Actual Address Range" (region to scrub) is a
> similarly bad thing to expose in RAS2.
> If the OEM does not want to expose this, they should lock it down so the
> interface is not exposed to the OS. These features are optional afterall.
> 4. Borislav:
> - How the scrub control exposed to the userspace will be used?
> POC added in rasdaemon with dynamic scrub control for CXL memory media
> errors and memory errors reported to the userspace.
> https://github.com/shijujose4/rasdaemon/tree/scrub_control_6_june_2024
> - Is the scrub interface is sufficient for the use cases?
> - Who is going to use scrub controls tools/admin/scripts?
> 1) Rasdaemon for dynamic control
> 2) Udev script for more static 'defaults' on hotplug etc.
>
> References:
> 1. ACPI spec r6.5 section 5.2.21 ACPI RAS2.
> 2. ACPI spec r6.5 section 9.19.7.2 ARS.
> 3. CXL spec r3.1 8.2.9.9.11.1 Device patrol scrub control feature
> 4. CXL spec r3.1 8.2.9.9.11.2 DDR5 ECS feature
> 5. Background information about kernel support for memory scan, memory
> error detection and ACPI RASF.
> https://lore.kernel.org/all/20221103155029.2451105-1-jiaqiyan@google.com/
> 6. Discussions on RASF:
> https://lore.kernel.org/lkml/20230915172818.761-1-shiju.jose@huawei.com/#r
>
> Changes
> =======
> v9 -> v10:
> 1. Feedback from Mauro Carvalho Chehab:
> - Changes suggested in EDAC RAS feature driver.
> use uppercase for enums, if else to switch-case, documentation for
> static scrub and ecs init functions etc.
> - Changes suggested in EDAC scrub.
> unit of scrub cycle hour to seconds.
> attribute node cycle_in_hours_avaiable to min_cycle_duration and
> max_cycle_duration.
> attribute node cycle_in_hours to current_cycle_duration.
> Use base 0 for kstrtou64() and kstrtol() functions.
> etc.
> - Changes suggested in EDAC ECS.
> uppercase for enums
> add ABI documentation. etc
>
> 2. Feedback from Fan:
> - Changes suggested in EDAC RAS feature driver.
> use uppercase for enums, change if...else to switch-case.
> some optimization in edac_ras_dev_register() function
> add missing goto free_ctx
> - Changes suggested in the code for feature commands.
> - CXL driver scrub and ECS code
> use uppercase for enums, fix typo, use enum type for mode
> fix lonf lines etc.
>
> v8 -> v9:
> 1. Feedback from Borislav:
> - Add scrub control driver to the EDAC on feedback from Borislav.
> - Changed DEVICE_ATTR_..() static.
> - Changed the write permissions for scrub control sysfs files as
> root-only.
> 2. Feedback from Fan:
> - Optimized cxl_get_feature() function by using min() and removed
> feat_out_min_size.
> - Removed unreached return from cxl_set_feature() function.
> - Changed the term "rate" to "cycle_in_hours" in all the
> scrub control code.
> - Allow cxl_mem_probe() continue if cxl_mem_patrol_scrub_init() fail,
> with just a debug warning.
>
> 3. Feedback from Jonathan:
> - Removed patch __free() based cleanup function for acpi_put_table.
> and added fix in the acpi ras2 driver.
>
> 4. Feedback from Dan Williams:
> - Allow cxl_mem_probe() continue if cxl_mem_patrol_scrub_init() fail,
> with just a debug warning.
> - Add support for CXL region based scrub control.
>
> 5. Feedback from Daniel Ferguson on RAS2 drivers:
> In the ACPI RAS2 driver,
> - Incorporated the changes given for clearing error reported.
> - Incorporated the changes given for check the Set RAS Capability
> status and return an appropriate error.
> In the RAS2 memory driver,
> - Added more checks for start/stop bg and on-demand scrubbing
> so that addr range in cache do not get cleared and restrict
> permitted operations during scrubbing.
>
> v7 -> v8:
> 1. Add more detailed cover letter and add info for basic analysis
> of ACPI ARS for comment from Dan Williams.
> 2. Changed file name etc from ras2 to acpi_ras2 in memory ACPI RAS2
> driver for comment from Boris.
> 3. Add documents for usage for comment from Jonathan.
> 4. Changed logic in memory/acpi_ras2.c for enable background
> scrubbing to allow setting the scrub rate.
> 5. Merged memory/acpi_ras2_common.c with memory/acpi_ras2.c and
> obselete code, suggested by Jonathan.
> 6. Initial optimizations and cleanup especially in the memory/acpi_ras2.
> 7. Removed CXL ECS support for time being.
> 8. Removed support for region based scrub control from the scrub
> subsytem, which was needed for the CXL ECS, can be added later
> if required.
> 9. Fixed the format of few comments and a definition in CXL feature
> code for the feedbacks from Fan.
> 11. Jonathan done several optimizations, interface changes and
> cleanups all over the code.
> 12. Fixes for feedbacks from Daniel Ferguson(Amperecomputing)
> for RAS2.
> 13. Workaround for a RAS2 case of only one actual controller as
> reported by Daniel Ferguson(AmpereComputing) in their hardware.
> 14. Feedback from Yazen, move the common scrub and ras2 changes
> under /drivers/ras/.
> 15. Drop patch ACPICA: ACPI 6.5: Add support for RAS2 table because
> Rafael queued the patch.
> https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/commit/?h=bleeding-edge&id=9726d821f88e284ecd998b76ae5f2174721cd9dc
>
> v6 -> v7:
> 1. Main changes for comments from Jonathan, Thanks.
> 1.1. CXL
> - Changes for deal with small mail box and supporting multipart
> feature data transfers.
> - Provide more specific parameters to mbox supported/get/set features
> interface functions.
> - kvmalloc -> kmalloc in CXL scrub mem allocation for feature commands.
> - Changed the way using __free(kfree)
> - Removed readback and verify for setting CXL scrub patrol and ECS
> parameters. Could be added later if needed.
> - In is_visible() callback functions for scrub control sysfs attrs
> changed to writeback the default attribute mode value instead of
> setting per attrs.
> - Add documentation for sysfs interfaces for CXL ECS scrub control.
> 1.2. RAS2
> - In rasf common code, rename rasf to ras2 because RASF seems obselete.
> - Replace pr_* with dev_* log function calls from ACPI RAS2 and
> memory RAS2 drivers.
> - In rasf common code, rename rasf to ras2.
> - Removed including unnecessary .h file from memory RAS2 driver.
> - In is_visible() callback functions for scrub control sysfs attrs
> changed to writeback the default attribute mode value instead of
> setting per attribute.
>
> 2. Changes for comments from Fan, Thanks.
> - Add debug message if cxl patrol scrub and ecs init function
> calls fail.
> 3. Updated cover letter for feedback from Dan Williams.
>
> v5 -> v6:
> 1. Changes for comments from Davidlohr, Thanks.
> - Update CXL feature code based on spec 3.1.
> - attrb -> attr
> - Use enums with default counting.
> 2. Rebased to the latest kernel.
>
> v4 -> v5:
> 1. Following are the main changes made based on the feedback from Dan Williams on v4.
> 1.1. In the scrub subsystem the common scrub control attributes are statically defined
> instead of dynamically created.
> 1.2. Add scrub subsystem support externally defined attribute group.
> Add CXL ECS driver define ECS specific attribute group and pass to
> the scrub subsystem.
> 1.3. Move cxl_mem_ecs_init() to cxl/core/region.c so that the CXL region_id
> is used in the registration with the scrub subsystem.
> 1.4. Add previously posted RASF common and RAS2 patches to this scrub series.
>
> 2. Add support for the 'enable_background_scrub' attribute
> for RAS2, on request from Bill Schwartz(wschwartz@...erecomputing.com).
>
> v3 -> v4:
> 1. Fixes for the warnings/errors reported by kernel test robot.
> 2. Add support for reading the 'enable' attribute of CXL patrol scrub.
>
> Changes
> v2 -> v3:
> 1. Changes for comments from Davidlohr, Thanks.
> - Updated cxl scrub kconfig
> - removed usage of the flag is_support_feature from
> the function cxl_mem_get_supported_feature_entry().
> - corrected spelling error.
> - removed unnecessary debug message.
> - removed export feature commands to the userspace.
> 2. Possible fix for the warnings/errors reported by kernel
> test robot.
> 3. Add documentation for the common scrub configure attributes.
>
> v1 -> v2:
> 1. Changes for comments from Dave Jiang, Thanks.
> - Split patches.
> - reversed xmas tree declarations.
> - declared flags as enums.
> - removed few unnecessary variable initializations.
> - replaced PTR_ERR_OR_ZERO() with IS_ERR() and PTR_ERR().
> - add auto clean declarations.
> - replaced while loop with for loop.
> - Removed allocation from cxl_get_supported_features() and
> cxl_get_feature() and make change to take allocated memory
> pointer from the caller.
> - replaced if/else with switch case.
> - replaced sprintf() with sysfs_emit() in 2 places.
> - replaced goto label with return in few functions.
> 2. removed unused code for supported attributes from ecs.
> 3. Included following common patch for scrub configure driver
> to this series.
> "memory: scrub: Add scrub driver supports configuring memory scrubbers
> in the system"
>
>
> Jonathan Cameron (1):
> platform: Add __free() based cleanup function for platform_device_put
>
> Shiju Jose (10):
> EDAC: Add generic EDAC RAS control feature driver
> EDAC: Add EDAC scrub control driver
> EDAC: Add EDAC ECS control driver
> cxl/mbox: Add GET_SUPPORTED_FEATURES mailbox command
> cxl/mbox: Add GET_FEATURE mailbox command
> cxl/mbox: Add SET_FEATURE mailbox command
> cxl/memscrub: Add CXL memory device patrol scrub control feature
> cxl/memscrub: Add CXL memory device ECS control feature
> ACPI:RAS2: Add ACPI RAS2 driver
> ras: scrub: ACPI RAS2: Add memory ACPI RAS2 driver
>
> Documentation/ABI/testing/sysfs-edac-ecs | 85 ++
> Documentation/ABI/testing/sysfs-edac-scrub | 76 ++
> Documentation/scrub/edac-scrub.rst | 115 +++
> drivers/acpi/Kconfig | 10 +
> drivers/acpi/Makefile | 1 +
> drivers/acpi/ras2.c | 391 +++++++++
> drivers/cxl/Kconfig | 19 +
> drivers/cxl/core/Makefile | 1 +
> drivers/cxl/core/mbox.c | 139 ++++
> drivers/cxl/core/memscrub.c | 873 +++++++++++++++++++++
> drivers/cxl/core/region.c | 6 +
> drivers/cxl/cxlmem.h | 129 +++
> drivers/cxl/mem.c | 4 +
> drivers/edac/Makefile | 1 +
> drivers/edac/edac_ecs.c | 396 ++++++++++
> drivers/edac/edac_ras_feature.c | 187 +++++
> drivers/edac/edac_scrub.c | 333 ++++++++
> drivers/ras/Kconfig | 10 +
> drivers/ras/Makefile | 1 +
> drivers/ras/acpi_ras2.c | 415 ++++++++++
> include/acpi/ras2_acpi.h | 59 ++
> include/linux/edac_ras_feature.h | 132 ++++
> include/linux/platform_device.h | 1 +
> 23 files changed, 3384 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-edac-ecs
> create mode 100644 Documentation/ABI/testing/sysfs-edac-scrub
> create mode 100644 Documentation/scrub/edac-scrub.rst
> create mode 100755 drivers/acpi/ras2.c
> create mode 100644 drivers/cxl/core/memscrub.c
> create mode 100755 drivers/edac/edac_ecs.c
> create mode 100755 drivers/edac/edac_ras_feature.c
> create mode 100755 drivers/edac/edac_scrub.c
> create mode 100644 drivers/ras/acpi_ras2.c
> create mode 100644 include/acpi/ras2_acpi.h
> create mode 100755 include/linux/edac_ras_feature.h
>
> --
> 2.34.1
>
Powered by blists - more mailing lists